Part Metadata Review and Datasheet Update


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll inspect the part metadata, look for an official datasheet if needed, then compare symbol, footprint, and pin descriptions against the datasheet and update the Datasheet property if missing.
I found and set the Samtec drawing URL; I’m retrying the datasheet extraction with narrower queries to validate the footprint and symbol.
Completed the review for Samtec CLM-112-02-L-D-A and set the missing Datasheet URL to the official Samtec drawing: https://suddendocs.samtec.com/prints/clm-1xx-02-xx-d-xx-mkt.pdf.
Key findings:
  • Metadata matches the MPN/manufacturer: Samtec CLM-112-02-L-D-A, 24 pins, connector prefix J.
  • Symbol has 24 passive terminals, numbered 01–24, which matches a 2×12 connector.
  • Footprint has 24 signal pads + 2 non-numbered alignment/mechanical pads, consistent with the “-A” alignment pin option.
  • Flagged issue: project description says 2.248 mm, but this CLM family/MPN is a 2.00 mm pitch dual-row socket; that description should be corrected.
  • Datasheet extraction tool timed out after the URL update, so the footprint dimensional cross-check is based on available project geometry plus known Samtec CLM part structure rather than a fully parsed datasheet table.
Fix description and verify
Fix pitch description
Retry datasheet check
Verify footprint dimensions
Run DRC review

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
01
01
Passive
02
02
Passive
03
03
Passive
04
04
Passive
05
05
Passive
06
06
Passive
07
07
Passive
08
08
Passive
09
09
Passive
10
10
Passive
11
11
Passive
12
12
Passive
13
13
Passive
14
14
Passive
15
15
Passive
16
16
Passive
17
17
Passive
18
18
Passive
19
19
Passive
20
20
Passive
21
21
Passive
22
22
Passive
23
23
Passive

CLM-112-02-L-D-A