Remote Receiver Sensor 38.0kHz 45m Through Hole This IR receiver series is optimized for long burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code compatibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These components have not been qualified to automotive specifications. Individual IC settings to reach maximum performance • Immunity against noise (lamps, LCD TV, Wi-Fi) • Low supply current • Photo detector and preamplifier in one package • Supply voltage: 2.0 V to 5.5 V VS1838B #CommonPartsLibrary #Sensor #Transducer #Optical-Sensor #Photo-Detectors #Remote-Receiver #TSOP38238

Polymeric PTC Resettable Fuse 6V 500 mA Ih Surface Mount 0603 (1608 Metric), Concave polyfuse 500mA 0603 The 0603L050YR is a surface-mount resettable fuse based on polymeric positive temperature coefficient technology, designed to provide overcurrent protection in compact electronic circuits. Under normal operating conditions, the device exhibits low resistance and allows current to pass with minimal power loss. When exposed to an overcurrent condition, the device transitions to a high-resistance state, effectively limiting the current and protecting downstream components. Once the fault condition is removed and power is cycled or the device cools, the fuse automatically resets to its original low-resistance state. This component is optimized for space-constrained applications requiring reliable, resettable protection, such as portable electronics, battery-powered systems, and low-voltage signal lines. Its small form factor enables integration into dense PCB layouts while maintaining compliance with industry safety standards for overcurrent protection. Package and Mounting: Surface-mount device in standard 0603 footprint, compatible with automated assembly processes including reflow soldering. Electrical Characteristics: The device is designed to maintain normal operation at a defined hold current level and transition to a protective state when the current exceeds its trip threshold. It operates within low-voltage circuits and provides fast response to fault conditions while minimizing nuisance tripping under typical load variations. Functional Behavior: The fuse operates by increasing resistance sharply in response to thermal energy generated by excess current. This behavior reduces current flow and limits fault energy. After removal of the overcurrent condition, the device gradually returns to its conductive state, enabling repeated use without replacement. Applications: Suitable for use in power lines, battery packs, USB interfaces, consumer electronics, and other low-voltage systems where resettable overcurrent protection is required. Compliance and Reliability: Designed to meet relevant safety and environmental standards for electronic components, ensuring stable performance across specified operating conditions and long-term reliability in field applications. #commonpartslibrary #fuse #Circuit-Protection #PTC #ptc #polymeric

802.15.4, Bluetooth, WiFi Bluetooth v5.0, Zigbee Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N8 integrates a 32-bit RISC-V single-core processor running up to 160 MHz, along with 8 MB of embedded SPI flash memory. It supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band for improved efficiency and lower latency Bluetooth Low Energy (BLE 5) for short-range communication IEEE 802.15.4 for protocols such as Thread and Zigbee The module features a built-in PCB antenna, RF circuitry, crystal oscillator, and passive components, making it a complete solution that simplifies hardware design. It provides a wide range of GPIO pins and peripheral interfaces such as UART, SPI, I2C, PWM, ADC, and more, enabling flexible integration with sensors and external devices. Designed for low power consumption, it includes multiple power-saving modes, making it suitable for battery-powered applications. Typical Applications Smart home and IoT devices Wireless sensors and control systems Industrial automation Smart lighting and energy management Matter-compatible devices (via Thread support)

Buck Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A 8-PowerSOIC (0.154", 3.90mm Width) The LM5013DDAR is a 100-V input, 3.5-A buck switching regulator IC that efficiently steps down high DC voltages (such as 24 V, 48 V, or battery rails) to lower regulated outputs. It is optimized for rugged environments where wide input variations and high reliability are required. It features ultra-low quiescent current operation, making it suitable for systems that require high efficiency even at light load or standby conditions. Key Features Wide input voltage range: 6 V to 100 V Up to 3.5 A output current capability Integrated 100-V high-side MOSFET Non-synchronous buck topology Ultra-low quiescent current (IQ) for high efficiency in standby Constant-on-time (COT) control for fast transient response No external compensation components required Adjustable output voltage (down to ~1.2 V reference) 50 ns minimum on/off time for high step-down ratios Built-in protection features: Overcurrent protection Thermal shutdown Input undervoltage lockout (UVLO) Open-drain power-good (PGOOD) signal for system monitoring Meets low EMI requirements (CISPR 25 Class 5 capable) Package 8-pin SO PowerPAD (DDA) surface-mount package Designed for good thermal performance in high-voltage applications Typical Applications Industrial power supplies (24 V / 48 V systems) Automotive power systems Telecom and networking equipment High cell-count battery systems Motor control and inverter subsystems #LM5013 #BuckConverter #DCDCConverter #TexasInstruments #PowerManagementIC #HighVoltageRegulator #3ARegulator #IndustrialPower #AutomotiveElectronics #SwitchingRegulator #COTController

Automotive, 60-V, 6-A, 30-mΩ, one-channel smart high-side switch with adjustable current limit TPS1HTC30-Q1 is a single-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed to meet the requirements of 24-V automotive battery systems. The low RON(30 mΩ) minimizes device power dissipation driving a wide range of output load current up to 6-A DC, and the 60- V DC operating range improves system robustness. The device integrates protection features such as thermal shutdown, output clamp, and current limit. These features improve system robustness during fault events such as short circuit. TPS1HTC30-Q1 implements an adjustable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The device also provides an accurate load current sense that allows for improved load diagnostics such as overload and open-load detection enabling better predictive maintenance. TPS1HTC30-Q1 is available in a small 14-pin, 4.40- mm × 5.0-mm HTSSOP leaded package with 0.65- mm pin pitch minimizing the PCB footprint. • Single-channel smart high-side power switch for 24-V automotive systems with full diagnostics • Wide operating voltage range: 6 V to 60 V – OVP protection: 66 V • Low RON: 30-mΩ typical, 55-mΩ maximum • Low standby current: < 0.5 µA • Low quiescent current (Iq): < 2 mA • Improve system level reliability through adjustable current limiting – Current limit: 2 A –16 A • Accurate current sensing: ±4% at 1 A • Protection – Overload and short-circuit protection – Integrated inductive discharge clamp – Undervoltage lockout (UVLO) protection – Loss of GND, loss of supply protection – Reverse battery protection with external components • Diagnostics – On and off state output open-load and short-tobattery detection – Overload and short to ground detection – Absolute and relative thermal shutdown detection • Functional Safety-Capable – Documentation available to aid functional safety system design • Operating junction temperature: –40 to 125°C • Input control: 1.8-V, 3.3-V and 5-V logic compatible • Integrated fault sense voltage scaling for ADC protection • Qualifications – AEC-Q100 qualified for automotive applications • Temperature grade 1: –40°C to +125°C, TA • 14-pin thermally-enhanced TSSOP package TPS1HTC30AQPWPRQ1 #CommonPartsLibrary #IntegratedCircuit

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower

1/1 Transceiver Half CANbus 8-SOIC The SN65HVD230DR is a high-speed Controller Area Network (CAN) transceiver designed to interface a CAN protocol controller with the physical two-wire CAN bus. It operates as a differential line driver and receiver, translating logic-level signals into robust bus-level signals suitable for automotive, industrial, and distributed control applications. The device is optimized for reliable communication in electrically noisy environments and supports low-power operation, making it suitable for systems requiring energy efficiency and extended operational stability. This transceiver conforms to widely adopted CAN physical layer standards and is intended for use in systems requiring high data integrity, fault tolerance, and electromagnetic compatibility. It integrates protection features and supports standby functionality to reduce system power consumption when communication is inactive. Functional Overview The device provides bidirectional signal conversion between a CAN controller and the differential CAN bus lines. It features a transmit data input and a receive data output, enabling full-duplex communication at the protocol level. The driver stage generates differential output signals on the bus, while the receiver stage detects and translates bus signals back into logic-level data. An internal control mechanism allows the device to enter a low-power standby mode, reducing current consumption when active communication is not required. The transceiver includes slope control capability to manage signal edge rates, which helps minimize electromagnetic interference and improves signal integrity across the network. Electrical Characteristics The transceiver operates from a single low-voltage supply and is designed for compatibility with modern microcontrollers and digital logic systems. It provides differential output drive capability with controlled rise and fall characteristics. The receiver is designed with high input sensitivity and noise immunity to ensure accurate signal detection under varying bus conditions. The device includes thermal protection and safeguards against bus faults, including short-circuit conditions. Its internal circuitry is designed to maintain stable operation across a wide range of environmental conditions and supply variations. Interface Requirements The logic interface is compatible with standard digital input and output levels, allowing direct connection to a CAN controller. The bus interface consists of two differential lines that connect to the CAN network. Proper termination and layout practices are required to ensure optimal communication performance and compliance with CAN network design guidelines. Operating Conditions The device is intended for operation across a broad temperature range suitable for industrial and automotive environments. It maintains functional integrity under typical voltage fluctuations and environmental stresses encountered in embedded systems. Protection and Reliability Features The transceiver incorporates protection mechanisms to guard against overcurrent, thermal overload, and electrostatic discharge. It is designed to maintain communication reliability even in the presence of transient disturbances and electrical noise. Packaging and Integration The SN65HVD230DR is provided in a compact surface-mount package suitable for automated assembly. Its pin configuration supports straightforward integration into printed circuit board designs with minimal external components. #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #65HVD230

2 Position Wire to Board Terminal Block Horizontal with Board 0.150" (3.81mm) Through Hole ## Engineering Specification ## General Description The **1727010** is a Phoenix Contact **MKDS series PCB terminal block** designed for secure wire-to-board electrical connection in printed circuit board assemblies. It provides a compact screw-clamp termination interface for connecting external conductors to PCB circuitry. The component is suitable for industrial electronics, automation equipment, control modules, power interfaces, instrumentation, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1727010** Manufacturer: **Phoenix Contact** Product Name: **MKDS 1/ 2-3,81** Product Series: **MKDS** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed PCB terminal block that allows external wires to connect directly to the printed circuit board. The screw-clamp mechanism provides both mechanical conductor retention and electrical continuity between the field wiring and PCB circuit. This makes the component suitable for applications where wiring must be secure, serviceable, and accessible during installation or maintenance. ## Mechanical Description The terminal block uses a compact housing with side-entry conductor access and through-hole solder pins for stable PCB attachment. Its construction supports organized wire routing and practical access for conductor insertion and screw tightening. The design is suitable for compact board layouts where reliable field wiring connection is required. ## Electrical Description The component is intended for signal and low-voltage power connection applications within the manufacturer’s specified electrical ratings. It provides stable electrical contact when used with compatible conductor sizes, correct wire preparation, and proper screw tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements that transfer current from the inserted conductor to the soldered PCB pins. The screw connection with tension sleeve helps maintain reliable contact pressure and secure conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1727010** is intended for through-hole solder mounting on a printed circuit board. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidance. The component should be positioned to allow safe wire insertion, screwdriver access, and adequate clearance from nearby components or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, power supply interfaces, relay boards, instrumentation equipment, sensor wiring interfaces, building control systems, communication hardware, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current requirement, voltage rating, tightening torque, creepage and clearance spacing, solder joint strength, wire routing, and service access. The terminal block should not be used beyond the manufacturer’s specified electrical, mechanical, or environmental limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkds #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

Wio-E5 Dev Kit embedded with Wio-E5 STM32WLE5JC LoRa module that supports Long Range protocol on the global frequency band. It provides full GPIOs, which support various data protocols and interfaces such as RS485, Grove, male/female headers, etc. This makes it user-friendly because it allows for easy and flexible connections to other devices or components. It would be a perfect choice for fast testing and rapid prototyping of your Long Range IoT projects.

Air Quality Sensors VOC and NOx (MOX) Gas Pollutant Sensor The SGP41-D-R4 is a compact digital gas sensor developed by Sensirion for indoor air quality monitoring applications. It is designed to detect volatile organic compounds (VOC) and nitrogen oxides (NOx) using Sensirion’s CMOSens® sensor technology. The device integrates sensing elements, analog front-end circuitry, calibration memory, and digital signal processing within a miniature surface-mount package, enabling accurate and reliable environmental sensing with minimal external components. The sensor communicates through a standard I²C digital interface and is optimized for low-power operation, making it suitable for battery-powered and portable electronic systems. The SGP41 is intended for use in air purifiers, HVAC systems, smart home devices, wearable electronics, environmental monitoring equipment, and other applications requiring real-time indoor air quality assessment. The device supports humidity-compensated measurements when paired with an external humidity and temperature sensor, improving long-term stability and measurement accuracy. Factory calibration eliminates the need for manual calibration during manufacturing. Key Features Digital VOC and NOx gas sensing CMOSens® technology integration I²C communication interface Fully calibrated and linearized output Humidity compensation capability Low power consumption operation Compact DFN surface-mount package Fast response and recovery characteristics Optimized for indoor air quality applications RoHS and halogen-free compliant Electrical Characteristics Supply voltage operation compatible with low-voltage embedded systems Low average current consumption suitable for portable devices Integrated digital signal processing and calibration memory I²C serial communication support with standard addressing Stable operation across industrial temperature ranges Mechanical Characteristics Small DFN package optimized for compact PCB layouts Surface-mount assembly compatible Low-profile package suitable for space-constrained designs Moisture-sensitive device requiring proper handling during assembly Functional Characteristics Simultaneous VOC and NOx sensing capability Real-time indoor air quality monitoring Compensation support for environmental humidity effects Long-term measurement stability Fast startup and measurement readiness Designed for continuous sensing applications Typical Applications Indoor air quality monitoring systems Smart thermostats and HVAC controllers Air purifiers and ventilation systems Smart home and IoT devices Portable environmental monitoring equipment Wearable health and wellness devices Building automation systems Consumer electronics requiring air quality detection #Sensor #Transducer #Gas#Sensor #SGP41

Electronic Fuse Regulator High-Side 10A 10-VQFN-HR (2x2) The TPS25981xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges and excessive inrush current. Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current (during startup) or breaking the circuit (during steady-state). The overcurrent protection threshold as well as the transient overcurrent blanking timer are useradjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2-mm × 2-mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range of –40°C to +125°C. • Wide operating input voltage range: 2.7 V to 16 V – 20-V absolute maximum • Integrated FET with low on-resistance: RON = 6 mΩ (typ.) • Fast overvoltage protection – Adjustable overvoltage lockout (OVLO) with 1.2-μs (typ.) response time • Overcurrent protection with load current monitor output (ILM) – Circuit-breaker response – Adjustable threshold (ILIM) 1.5 A – 11 A • ±10% accuracy for ILIM > 5 A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±10% (IOUT ≥ 3 A) • Fast-trip response for short-circuit protection – 640-ns (typ.) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Active low enable input with adjustable undervoltage lockout threshold (OVLO) • Adjustable output slew rate control (dVdt) • Option to drive external FET for reverse current blocking in disabled/OFF state • Overtemperature protection • Quick Output Discharge • Digital outputs – Power Good (PG) and fault indication (FLT) • UL 2367 recognition (pending) • IEC 62368 CB certification (pending) • Small footprint: QFN 2-mm × 2-mm, 0.45-mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Supervisor Open Drain or Open Collector 1 Channel SOT-23-5 The TPS382x family of supervisors provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power on, RESET asserts when the supply voltage VDD becomes greater than 1.1V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET active low as long as VDD remains less than the threshold voltage, VIT−. An internal timer delays the return of the output to the inactive state (high) to make sure proper system reset. The delay time, td, starts after VDD has risen above the threshold voltage (VIT− + VHYS). When the supply voltage drops below the threshold voltage VIT−, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage, VIT–, set by an internal voltage divider. The TPS382x family also offers watchdog time out options of 200ms (TPS3820) and 1.6s (TPS3823, TPS3824, and TPS3828). • Power-on reset generator with a fixed delay time of 200ms (TPS3823, TPS3824, TPS3825, and TPS3828) or 25ms (TPS3820) • Manual reset input (TPS3820, TPS3823, TPS3825, and TPS3828) • Reset output available in active-low (TPS3820, TPS3823, TPS3824, and TPS3825), active-high (TPS3824 and TPS3825), and open drain (TPS3828) • Supply voltage supervision range: 2.5V, 3V, 3.3V, 5V • Watchdog timer (TPS3820, TPS3823, TPS3824, and TPS3828) • Supply current of 15μA (typical) • 5-pin SOT-23 package • Temperature range: −40°C to 85°C (−40°C to 125°C for TPS3823A-33) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Supervisor

The TPS3839G33DBZT is an ultra-low-power voltage supervisor designed to monitor system supply rails and provide reliable reset signaling for microcontrollers, processors, FPGAs, and other digital systems. The device continuously supervises the supply voltage and asserts a reset output when the monitored voltage falls below the factory-programmed threshold, ensuring proper system startup, shutdown, and fault recovery. Its low quiescent current makes it particularly suitable for battery-powered, portable, and energy-efficient applications where power consumption is critical. The device features a precision voltage monitoring architecture with a fixed reset threshold optimized for nominal logic supply rails. It provides a stable reset output with an internally defined reset timeout period, eliminating the need for external timing components. The compact package and robust noise immunity make it ideal for embedded systems, industrial controls, consumer electronics, IoT devices, medical equipment, and wireless communication platforms. Key Features Ultra-low quiescent current operation Precision fixed-voltage supervision Factory-programmed reset threshold for logic supply monitoring Active-low reset output Internal reset timeout delay High threshold accuracy over temperature Fast response to undervoltage conditions Push-pull reset output configuration No external components required for operation Compact surface-mount package Wide operating temperature range High reliability and low power consumption Applications Microcontroller reset generation Embedded control systems Battery-powered electronics Industrial automation equipment IoT and wireless sensor nodes Portable medical devices Consumer electronics Data acquisition systems Power management subsystems Communication and networking equipment Electrical Characteristics Fixed supply voltage monitoring Precision undervoltage detection Low operating current Integrated reset timing circuitry Stable reset assertion during power-up and brownout conditions Noise-tolerant voltage supervision Reliable operation across specified temperature range Package Information Surface-mount package Compact footprint for space-constrained designs RoHS-compliant construction Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powersupervisor #voltagesupervisor #resetcontroller #powermanagement #embeddedsystems #microcontroller #lowpower #batterypowered #industrialelectronics #iot #electronicsdesign #semiconductor #texasinstruments

Temperature Sensor Digital, Local -40°C ~ 125°C 10 b 8-MSOP The MCP9808T-E/MS is a high-accuracy digital temperature sensor developed by Microchip Technology for precision thermal monitoring applications. The device communicates through a standard I²C-compatible serial interface and is optimized for low-power embedded systems requiring accurate ambient temperature measurement. It integrates internal temperature sensing, analog-to-digital conversion, programmable alert functionality, and configurable power management within a compact MSOP package. The sensor is designed for applications including industrial monitoring, consumer electronics, IoT devices, thermal management systems, medical instrumentation, and battery-powered portable equipment. Its low operating current and shutdown capability make it suitable for energy-efficient systems where thermal accuracy and minimal power consumption are critical. The device supports programmable temperature limits and interrupt generation for over-temperature events, enabling autonomous thermal supervision without continuous host processor intervention. The MCP9808T-E/MS maintains high measurement accuracy across a wide operating temperature range and offers stable digital output without requiring external calibration components. Electrical Characteristics Supply voltage operation supports low-voltage and standard logic systems. Low operating current enables efficient continuous monitoring. Shutdown mode significantly reduces power consumption during inactive periods. Digital I²C interface supports standard and fast communication modes. Integrated temperature conversion engine provides direct digital temperature output. Temperature Sensing Features High-accuracy ambient temperature measurement. Wide operating temperature range suitable for industrial environments. Programmable resolution for balancing conversion speed and precision. Configurable upper, lower, and critical temperature alert thresholds. Integrated hysteresis control for stable thermal event detection. Communication Interface I²C-compatible serial communication interface. Configurable slave addressing for multi-device bus operation. Supports read and write access to internal configuration registers. Compatible with common microcontrollers and embedded processors. Functional Features Integrated alert output for thermal event signaling. Programmable interrupt and comparator operating modes. Internal registers support temperature monitoring and device configuration. Power-on reset circuitry ensures predictable startup behavior. Device identification registers support system-level verification. Mechanical Characteristics Package type is MSOP with compact surface-mount footprint. Suitable for automated PCB assembly processes. RoHS-compliant and lead-free manufacturing. Typical Applications Industrial temperature monitoring systems. Portable battery-powered electronics. Embedded microcontroller systems. Thermal protection and supervision circuits. Consumer and IoT sensing devices. Medical and laboratory instrumentation. #CommonPartsLibrary #Sensor #Transducer #Temperature-Sensor #MCP9808

SMB, Fakra Connector Plug, Male Pin 50 Ohms Through Hole, Right Angle Solder The FA1-NDRP-PCB-8 is a PCB-mounted connector component typically used for reliable board-to-board or cable-to-board electrical interconnections in electronic systems. It is designed to provide stable mechanical retention and dependable signal or power transfer in compact PCB assemblies. Components in this series are commonly used in industrial equipment, consumer electronics, embedded systems, and communication devices. Key Features PCB-mount connector design for easy integration into electronic assemblies Supports secure electrical and mechanical connection Compact form factor suitable for space-constrained designs Durable housing and contact structure for repeated mating cycles Designed for stable signal and/or power transmission Typically used in control boards, interface modules, and embedded electronics Compatible with automated PCB assembly processes depending on package style Typical Applications Industrial control equipment Consumer electronics Embedded and IoT devices Communication hardware Interface and expansion boards #Connector #RF-connector #Coaxial

22 Position Receptacle Connector 0.100" (2.54mm) Through Hole Gold The SSW-122-02-G-S is a surface-mount, single-row socket strip designed for reliable board-to-board or component interconnection in electronic assemblies. It is part of a standardized connector series intended for applications requiring compact form factor, consistent electrical performance, and ease of automated placement. The component features a low-profile design suitable for dense PCB layouts and is commonly used in prototyping, embedded systems, and production-level electronics. Design and Construction The connector is manufactured with precision-aligned contacts housed in a high-temperature thermoplastic body, enabling compatibility with standard reflow soldering processes. The contact system is engineered to ensure stable mechanical retention and consistent electrical conductivity, supporting repeated mating cycles without significant degradation. The materials used provide durability, resistance to thermal stress, and compliance with common industry standards for electronic components. Electrical Characteristics The device is intended to provide reliable signal transmission with minimal contact resistance. It supports low to moderate current applications typical of signal-level interconnections. The contact plating is designed to reduce oxidation and maintain stable electrical performance over time. Mechanical Features The connector is configured as a single-row socket with a defined pitch spacing suitable for standard header interfaces. Its surface-mount termination allows for secure attachment to printed circuit boards while minimizing required board space. The structure supports proper alignment during assembly and ensures consistent engagement with corresponding mating connectors. Applications This component is widely used in applications such as microcontroller boards, communication modules, sensor interfaces, and general-purpose electronic systems. It is suitable for both development environments and final product integration where dependable and space-efficient connectivity is required. Compliance and Reliability The SSW-122-02-G-S is designed to meet common industry requirements for environmental and mechanical reliability. It is typically compliant with RoHS standards and suitable for use in a variety of operating conditions encountered in commercial and industrial electronics. #commonpartslibrary #connector #header

QFN-68(7x7) Power Management - Specialized ROHS The RK806-1 is a multi-channel PMIC designed to deliver and manage power for modern embedded platforms. It integrates multiple high-efficiency DC-DC buck converters, LDO regulators, and a configurable power sequencing controller in a compact QFN-68 package. It is tightly coupled with Rockchip SoCs and is responsible for generating stable voltage rails for CPU cores, GPU, DDR memory, and peripheral blocks. ⭐ Key Features ⚡ 1. High-Integration Power Architecture Multiple synchronous buck converters (high-current rails for CPU/GPU) Several LDO regulators for low-noise analog and IO domains Supports dynamic voltage scaling (DVS) for performance optimization 🔌 2. Wide Output Capability Output voltage range: ~0.5 V to 3.4 V per channel Designed for modern low-voltage SoC power domains Supports both high-current and low-noise power rails 🧠 3. Programmable Power Sequencing OTP / register-configurable power-up & power-down sequence Ensures safe startup for multi-rail SoCs Supports synchronized sequencing with multiple PMICs 📡 4. Digital Control Interface I²C and SPI interface for configuration and control Real-time voltage adjustment per processor demand Register-based control for power modes and telemetry 🛡️ 5. Protection & Reliability Features Over-voltage protection (OVP) Over-current protection (OCP) Thermal shutdown protection Soft-start for inrush current control ⚙️ 6. Efficiency & Performance Optimizations High-frequency switching (~MHz range) for smaller external components Fast transient response for CPU load changes Low standby current for power-sensitive designs 📦 7. Package & Integration QFN-68 (7×7 mm) compact package High thermal efficiency for dense PCB layouts Minimal external components required 📌 Typical Applications Single-board computers (SBCs) AI edge computing devices Tablets and industrial embedded systems Consumer electronics using Rockchip SoCs (e.g., RK3588 platforms) #commonpartslibrary #integratedcircuit #powermanagement

SDRAM Memory IC 512Mbit Parallel 143 MHz 5.4 ns 54-TSOP II The AS4C32M16SB-7TCN is a single-data-rate synchronous dynamic random-access memory (SDR SDRAM) device manufactured by Alliance Memory. It is organized internally as a multi-bank array, allowing concurrent access operations across banks to improve effective memory bandwidth compared to simpler asynchronous DRAM architectures. The device is intended for general-purpose embedded memory applications where a synchronous, clock-driven memory interface is required, including embedded systems, industrial controllers, consumer electronics, networking equipment, and other designs that rely on a parallel SDRAM interface for working memory or buffering. As a drop-in style component within Alliance Memory's broader memory portfolio, this part is designed to be pin- and function-compatible with legacy SDR SDRAM devices originally offered by other manufacturers, allowing designers to source a continued-availability alternative for designs that depend on this memory architecture even as some original suppliers have discontinued production. This makes the device particularly useful in long-lifecycle industrial, embedded, and legacy system designs where a guaranteed supply of a specific memory interface and timing profile is critical to sustaining production over many years. The "B" designation in the part family indicates a specific die revision within the AS4C32M16S product line, reflecting a particular generation of internal silicon design while maintaining functional and pinout compatibility with related die revisions in the same footprint. The device communicates over a standard synchronous SDRAM command interface, using a clock-synchronized protocol for row and column addressing, data burst transfers, and bank management, and it supports the auto-refresh and self-refresh mechanisms typical of SDRAM devices to maintain stored data integrity without requiring constant external refresh management by the host controller. Mechanically, the device is housed in a thin small-outline package suited to space-constrained PCB layouts, and it is built for standard surface-mount assembly processes. The "-7TCN" suffix on this part number reflects a specific speed grade, package style, and temperature grade combination within the product family, with this particular variant intended for commercial temperature range operation. The device is supplied in tray packaging for surface-mount assembly and is compliant with RoHS material restrictions, supporting standard environmental and regulatory requirements for electronic components. Spec Sheet Identification Part Number: AS4C32M16SB-7TCN Device Family: AS4C32M16SB Manufacturer: Alliance Memory, Inc. Die Revision: B-die Functional Classification Device Type: Synchronous DRAM (SDR SDRAM) Memory Organization: Multi-bank array architecture Interface Type: Parallel, clock-synchronous command interface Refresh Capability: Supports auto-refresh and self-refresh modes Electrical Characteristics Supply Voltage: Standard 3.3V-class SDRAM supply rating Clock Frequency: Mid-range SDR SDRAM clock speed class Access Timing: Standard SDR SDRAM access time class for its speed grade Environmental & Qualification Temperature Grade: Commercial ("C" suffix designation) RoHS Compliance: Yes Product Positioning: Long-lifecycle, drop-in replacement memory device Package Package Type: Thin Small Outline Package, TSOP-II style Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tray packaging #AS4C32M16SB #AllianceMemory #SDRAM #SDRSDRAM #MemoryIC #EmbeddedMemory #TSOP #SurfaceMount #LegacyMemory #DropInReplacement #DRAM #EmbeddedSystems #IndustrialElectronics #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #MemoryComponent #PCBDesign #CommonPartsLibrary #IntegratedCircuit #Memory #AS4C32

STM32F030C6T6 with passive components as sublayout

Enclosed AC DC Converters 2 Output 15V 340mA, 340mA 80 ~ 305 VAC Input The RAC10-K/277 series are highly efficient PCB-Mount power conversion modules with ultra-low energy losses even in light load conditions. Built for worldwide usage, the AC/DC units cover an enhanced mains input range of 85VAC up to 305VAC and come with international safety certifications for both industrial and household standards. These AC/DC modules offer fully protected single or dual outputs as well as EMC Class B compliance without the need of any external components. The 140% peak power capability makes the RAC10-K/277 series suitable for inductive, high start-up current or nonlinear loads. With a full load temperature range of -40°C to +65°C, they are ideal for always on and standby mode operations in process automation, IoT and smart building applications. Input voltage: 85 VAC to 305 VAC (wide-range, including 277 VAC industrial lines) Output: Dual output (±15 V DC) Power rating: 10 Watts Isolation: Fully isolated AC to DC conversion Encapsulation: Fully sealed/potted module for safety and reliability #CommonPartsLibrary #power-supply #RAC10-15

Pressure Sensor 203.05PSI (1400kPa) Absolute 24 b 8-SMD Module The MS580314BA01-00 is a high-resolution digital absolute pressure sensor module from TE Connectivity Measurement Specialties. It integrates a precision MEMS pressure sensing element, a 24-bit ΔΣ ADC, and factory-calibrated coefficients to provide highly accurate digital pressure and temperature measurements. The sensor supports both I²C and SPI communication interfaces, making it easy to interface with a wide range of microcontrollers while requiring minimal external components. It is designed for low-power, high-accuracy applications such as altimeters, depth measurement systems, weather monitoring, industrial pressure sensing, and portable instrumentation. Key Features Digital absolute pressure sensor with integrated MEMS sensing element High-resolution 24-bit ΔΣ ADC with factory calibration Supports I²C and SPI digital interfaces Pressure range up to 14 bar (1400 kPa / 203 psi) Supply voltage: 1.8 V to 3.6 V Integrated temperature measurement for compensation and monitoring Low power consumption, suitable for battery-powered devices Operating temperature range: −40°C to +85°C Excellent long-term stability with low hysteresis Compact 8-SMD module for surface-mount PCB assembly Requires few or no external components for operation #PressureSensor #MEMS #AbsolutePressure #DigitalSensor #24BitADC #I2C #SPI #LowPower #IndustrialElectronics #Altimeter #DepthMeasurement #WeatherMonitoring #TEConnectivity #SurfaceMount #EmbeddedSystems

Connector Header Surface Mount, Right Angle 15 position 0.049" (1.25mm) The 0532611571 is a wire-to-board crimp housing connector manufactured by Molex, belonging to the Mini-Lock series. It is designed for compact, high-reliability connections in power and signal applications. This connector supports secure mating with corresponding headers and is commonly used in consumer electronics, industrial equipment, and automotive systems where space-saving and reliable contact are required. Key Features Compact wire-to-board connector system Positive locking mechanism for secure mating Designed for crimp terminal insertion Suitable for both power and signal transmission Polarized housing to prevent misalignment Friction lock for retention stability Mechanical Characteristics Number of positions: 15 Pitch: 2.50 mm Mounting type: Free-hanging (in-line) Contact termination: Crimp Housing material: Thermoplastic (UL-rated) Color: Natural (typical) Electrical Characteristics Rated voltage: Up to 250 V Current rating: Up to 3 A per contact (dependent on wire gauge and terminals used) Contact resistance: Low resistance design for reliable conduction Insulation resistance: High insulation performance Environmental Characteristics Operating temperature range: -40°C to +105°C RoHS compliant Suitable for standard environmental conditions in electronic assemblies Compatible Components Mating headers: Molex Mini-Lock series headers (2.50 mm pitch) Crimp terminals: Molex Mini-Lock crimp terminals (e.g., 50212 series) Applications Consumer electronics Industrial control systems Automotive electronics Power distribution within compact devices #commonpartslibrary #connector

Ethernet Controller 10/100 Base-T/TX Bus Interface 80-TQFP-EP (12x12) The LAN9254-I/JRX is an EtherCAT SubDevice (slave) controller developed by Microchip Technology, designed to serve as the communication backbone for industrial automation devices participating in an EtherCAT network. The device integrates dual Ethernet physical layer transceivers directly on-chip, eliminating the need for external PHY components and simplifying the design of EtherCAT-enabled equipment such as servo drives, sensors, I/O modules, and other field devices used in real-time industrial control systems. Architecturally, the controller can operate as either a two-port or three-port node, depending on the network topology required. In its standard configuration it functions as a two-port device supporting daisy-chain connections typical of EtherCAT line topologies. When configured as a three-port device, it gains an additional management interface port that can connect to an external PHY or to another LAN9254, enabling star or tree network topologies and allowing the device to act as a branching point within a larger EtherCAT installation. Each integrated Ethernet PHY operates in full-duplex mode and supports automatic crossover detection, so the device can use either straight-through or crossover cabling without requiring manual configuration. Beyond pure protocol handling, the LAN9254 includes a substantial set of general-purpose digital input and output lines, allowing it to be used in simple field devices without requiring a separate microcontroller. For more complex applications, the device communicates with an external host processor through an integrated host bus interface that behaves like simple memory-mapped SRAM, supporting both 8-bit and 16-bit data widths along with multiple byte-ordering conventions, which makes it straightforward to interface with a wide range of microcontroller and microprocessor architectures. Internally, dual process data RAM buffers manage the exchange of real-time process data between the host application and the EtherCAT communication engine, while a dedicated interrupt line notifies the host of relevant internal events. A key feature of the device is its built-in distributed clock mechanism, which provides high-precision timing synchronization across all nodes in an EtherCAT network. This capability is essential for motion control and other applications where multiple devices must act in tight temporal coordination. The controller also provides configurable status indication through standard network activity and link LEDs, along with optional error and run-state indicators that give visibility into the health and operational state of the device at a glance. Power architecture on the LAN9254 is simplified through an integrated linear regulator, allowing the device to be operated from a single primary supply rail while internally generating the lower voltage needed for its core logic. This reduces the external power supply complexity that would otherwise be required to support separate core and I/O voltage domains. The "-I" designation on this particular part number indicates an industrial-grade temperature rating, making it suitable for deployment in factory floor and other demanding industrial environments where extended thermal range and long-term reliability are required. The device is housed in a surface-mount package consistent with dense industrial control board layouts and is compliant with RoHS material restrictions. Spec Sheet Identification Part Number: LAN9254-I/JRX Device Family: LAN9254 Manufacturer: Microchip Technology Functional Classification Device Type: EtherCAT SubDevice (slave) controller Network Role: Two/three-port configurable node Integrated PHYs: Dual Ethernet physical layer transceivers, on-chip Auto-MDIX Support: Yes, supports direct and crossover cabling Communication & Protocol Features Protocol: EtherCAT Topology Support: Daisy-chain (line), star, and tree topologies Additional Port Mode: Optional third port for branching/tap configurations Clock Synchronization: Integrated distributed clock for high-precision timing Host Interface Interface Type: SRAM-like host bus interface Data Width Support: Selectable bit-width host bus operation Endianness Support: Multiple byte-ordering modes Process Data Handling: Dual process data RAM buffers Interrupt Support: Configurable host interrupt line Digital I/O General-Purpose I/O: Integrated digital I/O lines for microcontroller-less operation Standalone Mode: Supports operation without external microcontroller for simple device designs Power Architecture Supply Configuration: Single primary supply rail Internal Regulation: Integrated linear regulator for core voltage generation Status Indication LED Support: Standard run and link/activity indicators per port Optional Indicators: Configurable error and run-state status indicators Environmental & Qualification Temperature Grade: Industrial ("-I" suffix) RoHS Compliance: Yes Package Package Type: Surface-mount, quad flat package style Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel, per part suffix designation #LAN9254 #Microchip #EtherCAT #SlaveController #SubDeviceController #IndustrialEthernet #IndustrialAutomation #MotionControl #EmbeddedSystems #FieldDevice #DigitalIO #HostBusInterface #DistributedClock #TQFP #RoHSCompliant #IndustrialGrade #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #SemiconductorIC

N-Channel 30 V 161A (Tc) 140W (Tc) Surface Mount TO-252AA (DPAK) The IRLR7843TRPBF is an N-channel power MOSFET built on Infineon's HEXFET technology platform, originally developed by International Rectifier. It is designed as a low-voltage, high-current switching device intended for applications where minimizing conduction loss and maximizing efficiency are primary design goals. The part is particularly well suited to synchronous switching topologies, where pairs or arrays of MOSFETs alternately conduct to regulate power flow with minimal energy dissipation. This device targets high-density power conversion applications where board space is limited but current demands are substantial, such as notebook computer power delivery, point-of-load converters used in servers, and advanced telecom and datacom equipment. It is commonly found supporting synchronous buck converter stages that step down a higher input rail to a lower output voltage suitable for powering processors, memory, and other low-voltage digital logic. Its low on-resistance characteristic allows it to carry significant current while generating comparatively little resistive heating, which is essential in compact enclosures with constrained thermal budgets. The transistor is fabricated using a refined trench gate process that improves upon earlier HEXFET generations, offering reduced gate charge and lower switching losses alongside its low conduction resistance. This combination makes it effective in both the high-side and low-side positions of a synchronous switching cell, where fast, clean transitions reduce overlap losses and improve overall converter efficiency. The device also offers well-characterized avalanche energy ratings, giving designers confidence in its ruggedness when exposed to transient overvoltage events that can occur during switching, and it presents a very low gate impedance, allowing it to be driven efficiently by standard gate driver circuitry. Mechanically, the part is housed in a surface-mount power package with an exposed tab for enhanced thermal conduction to the host PCB, allowing heat generated during operation to be efficiently transferred away from the silicon die. This package style is widely used in power-dense designs where through-hole packages would be impractical. The device is supplied in a tape-and-reel format suitable for automated assembly and is compliant with RoHS material restrictions, reflecting current environmental and regulatory standards for electronic components. Spec Sheet Identification Part Number: IRLR7843TRPBF Device Family: HEXFET Power MOSFET Manufacturer: Infineon Technologies Functional Classification Device Type: Power MOSFET Channel Type: N-channel Technology: Trench-gate HEXFET (IR MOSFET legacy technology) Logic Level Compatibility: Logic-level gate drive compatible Electrical Characteristics Drain-to-Source Voltage Rating: Low-voltage class, optimized for sub-30V rail applications On-Resistance: Ultra-low on-resistance class Drain Current Capability: High continuous current class Gate Charge: Low gate charge, optimized for fast switching Gate Impedance: Ultra-low gate impedance Avalanche Characteristics: Fully characterized avalanche voltage and current rating Switching & Application Behavior Primary Application: Synchronous buck converter switching stages Suitable Position: High-side and low-side switch positions Target Use Cases: Point-of-load conversion, notebook power delivery, telecom/datacom power systems Thermal & Mechanical Package Type: Surface-mount power package with exposed thermal tab (DPAK-style) Mounting: Surface mount technology (SMT) Thermal Path: Tab-based conduction to PCB for heat dissipation Environmental & Qualification RoHS Compliance: Yes Lifecycle Status: Active production Packaging Format Supply Format: Tape-and-reel, per part suffix designation #IRLR7843 #Infineon #HEXFET #PowerMOSFET #NChannelMOSFET #SynchronousBuck #PowerElectronics #DCDCConverter #PointOfLoad #PowerConversion #DPAK #SMTPackage #RoHSCompliant #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #PowerDensity #LowRDSon #DiscreteSemiconductor #commonpartslibrary #transistor