Low supply current makes the MAX803/MAX809/MAX810 ideal for use in portable equipment. The MAX803 is available in a 3-pin SC70 package, and the MAX809/MAX810 are available in 3-pin SC70 or SOT23 packages. #integrated-circuit #microprocessor

N-Channel JFET, Idss 0.3 to 1.5mA, 3-Pin SOT-23 #commonpartlibrary #mosfet #N-Channel

Vishay SI2365EDS-T1-GE3 P-channel MOSFET Transistor, 4.7 A, -20 V, 3-Pin TO-236

3-Pole Female XLR Receptacle – Panel-mount 3-pin female XLR connector for professional balanced audio signal interconnection. Features horizontal PCB solder termination, rear panel mounting, latch-lock mechanism, 6 A current rating per contact, <50 V operating voltage, ≤6 mΩ contact resistance, >10 GΩ insulation resistance, and 1.5 kVDC dielectric strength. Incorporates hard gold-plated tulip contacts, a plastic housing with steel latch, separate ground contact connected to the mating connector shell and front panel (not Pin 1), and is rated for more than 1,000 mating cycles. Operates over a −30°C to +80°C temperature range with UL94 V-0 flammability-rated housing. #Neutrik #NC3FAH2 #XLRConnector #FemaleXLR #PanelMount #AudioConnector #PCBMount #3PinXLR #GoldPlatedContacts #ProfessionalAudio #BalancedAudio #EmbeddedSystems

The DRV5013 from Texas Instruments is a chopper-stabilized Hall Effect sensor designed for digital bipolar latch output applications, renowned for its superior sensitivity stability across a wide range of temperatures. This component is equipped with multiple sensitivity options, ranging from +1.3 mT (FA version) to +12 mT (BC version), catering to a breadth of magnetic sensing needs. With an operating voltage range of 2.5 V to 38 V and built-in reverse supply protection up to -22 V, as well as load dump and short-circuit protection, the DRV5013 ensures reliability and robustness in demanding environments. The device comes packaged in small form factors, including a 3-pin SOT-23 and 3-pin TO-92, facilitating integration into a variety of industrial applications such as power tools, flow meters, and brushless DC motors. Temperature stability is guaranteed with operating ranges from -40°C to +125°C (Q version) and -40°C to +150°C (E version), making the DRV5013 an ideal choice for applications requiring precise and dependable magnetic field detection across a wide environmental range.

Texas Instruments LM2936Z-3.3/NOPB is a 3.3 V fixed-output, 50 mA ultra-low-IQ LDO linear regulator in a 3-pin TO-92 (LP) through-hole package.

TBO5002S-1LF Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary

3-pin THT wire solder pad, 3.00 mm pitch, 1.52 mm pad, 1.02 mm drill cable connection wire, solder, pad

SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION / Hall Effect Sensor 25mA Monolithic 5V/9V/12V/15V/18V 3-Pin Ultra Mini SIP Bulk A3144

SOT65P210X110-3N Diodes Inc DMN53D0LW-7 N-channel MOSFET Transistor, 0.36 A, 50 V, 3-Pin SOT-323 1.1 Diodes Inc. DMN53D0LW-7 621-DMN53D0LW-7 https://www.mouser.com/Search/Refine.aspx?Keyword=621-DMN53D0LW-7 DMN53D0LW-7 https://www.arrow.com/en/products/dmn53d0lw-7/diodes-incorporated

3-position 2.00 mm pitch Yeonho SMH200 wire-to-board crimp connector housing for cable-side connection. Use with matching SMH200/2.00 mm series crimp terminals and PCB wafer/header. Keywords / Hashtags: SMH200-03P, SMH200 3pin, Yeonho SMH200, 2.00mm connector, wire-to-board connector, crimp housing, 3-pin housing, HY2.0 connector, #SMH200 #SMH20003P #Yeonho #WireToBoard #2mmConnector #CrimpHousing #HY20

CONN HEADER SMD R/A 3POS 1.25mm The SM03B-GHS-TB(LF)(SN) is a 3-pin, surface-mount, right-angle header connector that mates with JST GH-series wire housings. It provides a reliable, low-profile connection between a PCB and external wires using a crimp-style mating system. It belongs to the JST GH series, known for fine-pitch, compact connectors optimized for miniaturized electronics. 3-position connector (signal/power lines) 1.25 mm pitch for high-density PCB layout Surface-mount, right-angle (horizontal) mounting Shrouded header design for secure mating and alignment Locking ramp mechanism to prevent accidental disconnection Tin-plated contacts for reliable conductivity Lead-free / RoHS compliant (LF/SN finish) Current rating: ~1 A typical Voltage rating: ~50 V Operating temperature: approx. -25 °C to +85 °C 📦 Typical Applications Consumer electronics (wearables, IoT devices) Industrial control modules Robotics and sensor interfaces Battery-powered embedded systems Compact PCB interconnect systems #CommonPartsLibrary #Connector

6A 48V 26.7V Bidirectional 24V SOT-23 ESD and Surge Protection (TVS/ESD) ROHS The PESD1CAN is a bidirectional TVS (Transient Voltage Suppression) diode designed to protect automotive CAN bus communication lines from damage caused by ESD (electrostatic discharge), surge, and electrical fast transients. It uses silicon avalanche technology in a compact SOT-23 surface-mount package, allowing protection of two CAN signal lines with a single device. The diode is optimized for high-speed and fault-tolerant CAN networks commonly used in automotive and industrial systems. ESD protection up to ±30 kV (IEC 61000-4-2, air/contact) Peak pulse power: 200 W (8/20 µs waveform) Bidirectional protection for CAN_H and CAN_L lines Low clamping voltage for better signal protection Ultra-low leakage current (<1 µA typical) Low junction capacitance (~12–15 pF) for high-speed CAN signals Matched diode capacitance (very low mismatch ~0.1%) for signal integrity Small SOT-23 package (3-pin SMD) Complies with IEC 61000-4-2, -4-4, and -4-5 surge standards #CommonPartsLibrary #Diode

8A@8/20us 54V 26.7V 24V SOT-23 ESD and Surge Protection ESD DIODE 24VWM 41VC SOT-23 PESD2CAN is a dual-line ESD protection diode designed to protect automotive Controller Area Network (CAN) bus interfaces from Electrostatic Discharge (ESD), surge events, and other transient voltage disturbances. It is housed in a compact SOT-23 package and provides protection for both CANH and CANL lines using a single device. Key Features Dual CAN bus line protection in a single SOT-23 package Maximum peak pulse power: 230 W (8/20 μs surge waveform) Low clamping voltage: 41 V at 5 A surge current Ultra-low leakage current: < 1 nA ESD protection up to 30 kV Compliant with IEC 61000-4-2 Level 4 ESD standard Compliant with IEC 61000-4-5 surge immunity standard AEC-Q101 qualified for automotive applications Reverse standoff voltage: 24 V Low capacitance (typically 25 pF) to minimize impact on CAN signal integrity Suitable for both high-speed and fault-tolerant CAN networks Typical Applications Automotive CAN bus networks Industrial CAN communication systems Automotive electronic control units (ECUs) CAN transceivers requiring ESD and surge protection Any differential communication interface exposed to external connectors Package SOT-23 (3-pin) Surface-Mount Device (SMD) package. #CommonPartsLibrary #Diode

TO229P290X760X1320-3P http://www.st.com/web/en/resource/technical/document/datasheet/CD00001225.pdf BD140, PNP Bipolar Transistor, 3 A 80 V HFE:25 Power, 3-Pin SOT-32 2.9 511-BD140 https://www.mouser.co.uk/ProductDetail/STMicroelectronics/BD140?qs=ljbEvF4DwOOQh3TFtIzRQQ%3D%3D STMicroelectronics BD140

DC-DC switching regulator designed as a drop-in replacement for 7805 linear regulators, providing a regulated 5 V output at up to 3 A from a 7 V to 36 V DC input. It operates with high efficiency, requires no heatsink under normal conditions, and is supplied in a 3-pin SIP-compatible package for through-hole mounting. #DCDCRegulator #SwitchingRegulator #VoltageRegulator #BuckConverter #5VOutput #3A #7Vto36VInput #SIP3 #MORNSUN #PowerManagement

N-Channel Power MOSFET – 30 V N-channel enhancement-mode MOSFET optimized for load switching, DC-DC converters, battery-powered devices, power management, motor control, and embedded switching applications. Features a 30 V drain-to-source voltage (VDS), 2 A continuous drain current, and 165 mΩ maximum RDS(on) at VGS = 4.5 V, with 1.8 V logic-level gate drive compatibility for low-voltage microcontroller interfaces. Offers 1.7 nC typical gate charge, 130 pF typical input capacitance, ultra-fast switching performance, and an integrated body diode for efficient power conversion. Rated for ±12 V gate-to-source voltage, 800 mW power dissipation, 150°C maximum junction temperature, and housed in a 3-pin MCPH3 (SC-70 / SOT-323) surface-mount package. This device is obsolete / not recommended for new designs. #onsemi #MCH3478TLH #MCH3478 #NChannelMOSFET #LogicLevelMOSFET #PowerMOSFET #LoadSwitch #DCDCConverter #PowerManagement #MotorDriver #SOT323 #EmbeddedSystems

2SK209-BL(TE85L,F) is a Toshiba low-noise N-channel junction FET with −50 V drain-source rating, BL-grade 6–12 mA drain current, 150 mW power dissipation, and a 3-pin SC-59/SOT-346 surface-mount package for low-level analog amplification and switching. Keywords/Tags: 2SK209, 2SK209-BL, N-channel JFET, low-noise transistor, SC-59 SOT-346, analog amplifier transistor

Ceramic Resonator, 4MHz Fundamental 15pF, 3-Pin Cap Chip, 7.2 x 3 x 1.55mm #CommonPartsLibrary #Crystal #Oscillator #Resonator #CSTCC

Processor Supervisor 2.66V 3/3.3/5V 3-Pin SOT-23 T/R - Tape and Reel #Commonpartslibrary #Integratedcircuit #Powermanagement #supervisor

Transistor GP BJT PNP 80V 12A 3-Pin TO-220 #CommonPartsLibrary #Transistors #Bipolar(BJT) #PNP #SingleBipolarTransistors

Transistor GP BJT NPN 100V 25A 3-Pin TO-247 #CommonPartsLibrary #Transistors #Bipolar(BJT) #NPN #SingleBipolarTransistors

LDO Regulator 8V 0.5A 3-Pin (3+Tab) TO-220 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

LDO Regulator Pos 2V 0.3A 3-Pin SOT-23-5 #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator