Sub-GHz Wireless Microcontroller – Ultra-low-power Sub-GHz wireless microcontroller integrating a 64 MHz Arm® Cortex®-M0+ core with an RF transceiver for LPWAN, smart metering, industrial IoT, building automation, asset tracking, and wireless sensor networks. Features 128 KB Flash, 32 KB SRAM, and supports Sub-GHz operation from 413–479 MHz and 826–958 MHz (including regional ISM bands), with up to +20 dBm transmit power, −132 dBm receiver sensitivity, and data rates up to 600 kbps. Supports Sigfox, KNX RF, IEEE 802.15.4g, Mioty, and proprietary wireless protocols using 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, ASK, OOK, DBPSK, and DSSS modulation. Operates from a 1.7 V to 3.6 V supply and includes 17 GPIOs, 12-bit ADC, timers, DMA, SPI, I²C, UART/USART, I²S, IrDA, PWM, watchdog, AES hardware accelerator, true random number generator (TRNG), and low-power wake-up receiver. Specified for operation over a −40°C to +105°C temperature range and housed in a 32-pin VFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32WL33KBV7 #STM32WL33 #SubGHzMCU #WirelessMCU #CortexM0Plus #LPWAN #Sigfox #KNXRF #IEEE802154g #Mioty #IoT #EmbeddedSystems

Non-Synchronous Buck DC-DC Converter – 3 A non-synchronous step-down (buck) switching regulator with an integrated 80 V, 3.5 A power MOSFET for industrial, telecom, and high-voltage power supply applications. Operates from a 12 V to 76 V input voltage, provides an adjustable output voltage from 1.0 V to 76 V, and features a programmable switching frequency from 50 kHz to 750 kHz. Includes current-mode control, soft-start, enable input, 0 µA standby current, precision reference (±1.5%), externally programmable undervoltage lockout (UVLO) with hysteresis, overcurrent protection (OCP), overvoltage protection (OVP), and thermal shutdown (TSD). Specified for operation over a −40°C to +85°C temperature range and housed in an 8-pin HTSOP-J exposed-pad package. #ROHM #BD9G341AEFJE2 #BD9G341AEFJ #BuckConverter #DCDCConverter #StepDownRegulator #SwitchingRegulator #PowerManagement #3A #80VMOSFET #IndustrialPower #HTSOPJ8 #EmbeddedSystems

High-Precision Multi-Band RTK GNSS Receiver Module – Multi-band GNSS receiver module designed for real-time kinematic (RTK) positioning, precision agriculture, surveying, autonomous robots, UAVs, industrial automation, asset tracking, and embedded navigation systems. Supports concurrent reception of GPS, Galileo, GLONASS, BeiDou, QZSS, SBAS, and NavIC signals on L1/L2/L5 frequency bands, delivering centimeter-level positioning accuracy with RTK and PPP-RTK correction services. Features up to 25 Hz navigation update rate, −167 dBm tracking sensitivity, UART, USB, I²C, and SPI host interfaces, RAW GNSS measurement output, RTCM 3.x input/output, NTRIP compatibility, time pulse output, and integrated RTK engine for high-precision positioning. Operates from a 2.7 V to 3.6 V supply, consumes approximately 0.5 W typical, and is specified for operation over a −40°C to +85°C temperature range. Packaged in a compact 54-pin LGA module (22 × 17 mm) for embedded integration. #u-blox #ZEDF9P05B #RTKGNSS #HighPrecisionGNSS #MultiBandGNSS #GPS #Galileo #BeiDou #GLONASS #Surveying #AutonomousRobotics #PrecisionAgriculture #EmbeddedSystems

Digital Temperature Sensor – 16-bit digital temperature sensor with I²C/SMBus 3.0 interface for local temperature measurement from −40°C to +125°C. Operates from a 1.5 V to 3.6 V supply and provides ±0.5°C accuracy over the −10°C to +60°C range. Features programmable temperature thresholds, ALERT output, one-shot mode, support for up to 1 MHz I²C clock, and up to four selectable I²C addresses. Housed in a 6-pin UDFN (2 × 2 mm) package. #STMicroelectronics #STTS22H #STTS22HTR #TemperatureSensor #DigitalTemperatureSensor #I2C #SMBus #16Bit #TemperatureMonitoring #UDFN6 #EmbeddedSystems #Sensors

Low-Noise Low-Dropout (LDO) Voltage Regulator – Fixed 3.0 V positive-output LDO regulator providing up to 300 mA output current for low-noise power regulation. Operates from a 1.6 V to 6.0 V input voltage, features 140 mV maximum dropout voltage at 300 mA, 15 µA typical quiescent current, 65 dB to 40 dB PSRR (100 Hz to 1 MHz), and an enable input for power management. Includes overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO). Specified for an operating junction temperature range of −40°C to +125°C and housed in a 5-pin SOT-23 (DBV) package. #TexasInstruments #TPS7A2030PDBVR #LDO #VoltageRegulator #LowDropout #300mA #3V #LowNoise #PowerManagement #SOT23 #EmbeddedSystems #PMIC

32-Bit ARM Cortex-R4F Microcontroller – Safety-oriented automotive microcontroller with 3 MB Flash and 256 KB RAM, operating at up to 160 MHz. The Texas Instruments TMS5703137DPGEQQ1 integrates 24-channel 12-bit ADCs, 64 KB EEPROM, and interfaces including CAN, Ethernet, FlexRay, I²C, LIN, SPI/MibSPI, SCI, and UART/USART. It operates from 1.14 V to 3.6 V, supports 58 I/Os, and is housed in a 144-pin LQFP (20 × 20 mm) package with an operating temperature range of −40°C to +125°C. #TexasInstruments #TMS5703137DPGEQQ1 #TMS570 #CortexR4F #Microcontroller #MCU #AutomotiveMCU #CAN #FlexRay #Ethernet #ADC #EmbeddedSystems

High-precision multi-band GNSS receiver module supporting GPS, Galileo, GLONASS, BeiDou, and QZSS with L1/L5 signal reception and integrated RTK and PPP-RTK positioning technologies. Operates from a 2.7 V to 3.6 V supply, provides −167 dBm tracking sensitivity, and supports I²C, SPI, UART, and USB host interfaces. Housed in a 54-pin LGA package (22 × 17 mm) and specified for an operating temperature range of −40°C to +85°C. #uBlox #ZEDF9P #ZEDF9P15B #GNSS #GNSSReceiver #RTK #PPPRTK #GPS #Galileo #GLONASS #BeiDou #QZSS #L1 #L5 #I2C #SPI #UART #USB #LGA54 #EmbeddedSystems

ARM® Cortex®-M33 STM32L5 Microcontroller IC 32-Bit 110MHz 512KB (512K x 8) FLASH 48-LQFP (7x7) Microcontroller for ultra-low-power embedded control applications, based on an Arm® Cortex®-M33 32-bit core with TrustZone®, FPU, and DSP instructions operating at up to 110 MHz. It features 512 KB Flash, 256 KB SRAM, a 1.71 V to 3.6 V supply range, USB 2.0 Full-Speed, FDCAN, I²C, SPI, USART/UART, SDMMC, OCTOSPI interfaces, dual 12-bit ADCs, dual 12-bit DACs, and is housed in a 48-pin LQFP package. #STMicroelectronics #STM32L562CET6 #STM32L5 #Microcontroller #ArmCortexM33 #TrustZone #UltraLowPower #EmbeddedSystems #512KBFlash #256KBSRAM #110MHz #LQFP48 #USBFS #FDCAN #I2C #SPI #UART #SDMMC #OCTOSPI #ADC #DAC

Board-to-Wire Header Connector – 6-position, right-angle, through-hole male pin header for board-to-wire connections with 3.5 mm pitch. Features a shrouded 4-wall housing, latch holder, board guide, tin-plated brass contacts, and glass-filled PBT insulator. Rated for 3 A per contact, supports an operating temperature range of −40°C to +125°C, and is designed for waterproof automotive applications. #JAE #MX44006NF1 #MX44 #Connector #BoardToWire #HeaderConnector #RightAngle #ThroughHole #6Pin #3_5mmPitch #AutomotiveConnector #WaterproofConnector #EmbeddedSystems

RFID Reader IC 13.56MHz FeliCa, ISO 14443, ISO 15693, MIFARE, NFC I2C 1.65V ~ 1.95V, 3V ~ 3.6V 40-VFQFN Exposed Pad NFC controller providing contactless communication for NFC reader/writer, peer-to-peer, and card emulation applications. It supports a 13.56 MHz operating frequency, I²C host interface with NCI 2.0, a 2.8 V to 5.5 V supply voltage, and is housed in a 40-pin HVQFN (6 × 6 mm) package, with support for ISO/IEC 14443 Type A/B, ISO/IEC 15693, and ISO/IEC 18092 standards. #NXP #PN7160A1HN_C100E #NFCController #NFC #RFID #13_56MHz #I2C #NCI2_0 #ISO14443 #ISO15693 #ISO18092 #HVQFN40 #EmbeddedSystems

Synchronous Buck DC-DC Converter – 2 A synchronous step-down (buck) switching regulator for high-efficiency power conversion in industrial, automotive, and embedded applications. Operates from a 4.5 V to 36 V input voltage, provides an adjustable output voltage from 0.6 V to 34.2 V, and switches at a 500 kHz fixed frequency. Features 40 µA typical quiescent current, 100% duty-cycle operation, synchronous rectification, cycle-by-cycle current limiting, hiccup short-circuit protection, thermal shutdown, undervoltage lockout (UVLO), power-good output, and enable input. Operates over a −40°C to +150°C junction temperature range and is housed in a 6-pin SOT-23-THIN (DDC) package. #TexasInstruments #LMR51420 #LMR51420XDDCR #BuckConverter #DCDCConverter #SynchronousBuck #SwitchingRegulator #PowerManagement #2A #SIMPLESWITCHER #SOT236 #EmbeddedSystems

N-Channel Linear Power MOSFET – High-current N-channel power MOSFET designed for linear mode operation, hot-swap circuits, electronic loads, battery management systems, industrial power supplies, motor control, DC-DC converters, and embedded power management applications. The IXYS IXTH75N10L2 features a 100 V drain-to-source voltage (VDS), 75 A continuous drain current, and 400 W maximum power dissipation, making it suitable for demanding high-power applications. Part of the Linear L2™ Series, it is specifically optimized for safe linear-mode operation, offering a wide Safe Operating Area (SOA) compared to conventional switching MOSFETs. Features a maximum RDS(on) of 21 mΩ (VGS = 10 V), 215 nC typical gate charge, ±20 V gate-source voltage rating, and 8100 pF input capacitance. Operates over a −55°C to +150°C junction temperature range and is housed in a TO-247-3 through-hole package, providing excellent thermal performance for high-power embedded and industrial systems. #IXYS #IXTH75N10L2 #PowerMOSFET #NChannelMOSFET #LinearL2 #LinearModeMOSFET #PowerManagement #ElectronicLoad #HotSwap #IndustrialElectronics #MotorControl #EmbeddedSystems

Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems

24 Bit Analog to Digital Converter 4, 8 Input 4 Sigma-Delta 56-VQFN (7x7) The ADS127L14 (quad) and ADS127L18 (octal) are 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs) based on the single-channel ADS127L11. The devices provide simultaneous sampling of four or eight channels with data rates up to 512kSPS (wideband filter mode) and 1365kSPS (low-latency filter mode). Features • Simultaneously measure four or eight channels • Wideband filter mode: up to 512kSPS • Low-latency filter mode: up to 1365kSPS • Power-scalable speed modes: – Max speed: 512kSPS • 83mW (ADS127L14) • 165mW (ADS127L18) – High speed: 400kSPS • 64mW (ADS127L14) • 128mW (ADS127L18) – Mid speed: 200kSPS • 37mW (ADS127L14) • 74mW (ADS127L18) – Low speed: 50kSPS • 12mW (ADS127L14) • 24mW (ADS127L18) • AC performance with DC precision: (High-Speed Mode) – Dynamic range at 200kSPS: 112dB (typical) – THD: –118dB (typical) – INL: 1ppm of FSR (typical) – Offset drift: 10nV/°C (typical) – Gain drift: 0.5ppm/°C (typical) • Precharge buffered signal inputs • Programmable by pin setting or SPI • Frame-sync port for output data • Internal or external clock operation • Analog supply voltage: 2.85V to 5.5V 2 Applications • Test and measurement: – Data acquisition (DAQ) – Shock and vibration instruments – Acoustics and dynamic strain gauges • Factory automation and control: – Condition monitoring • Aerospace and defense: – Sonar • Medical: – Electroencephalograms (EEG) • Grid Infrastructure: – Power quality analyzers #ADS127L14IRSHT #TexasInstruments #ADC #DeltaSigmaADC #24BitADC #SimultaneousSampling #DataAcquisition #IndustrialAutomation #MedicalInstrumentation #PowerQuality #PrecisionMeasurement #EmbeddedSystems

4-Bit Unidirectional Voltage-Level Translator – Four-channel fixed-direction voltage-level translator for logic-level shifting between mixed-voltage digital interfaces. Operates with independent VCCA and VCCB supplies from 1.08 V to 5.5 V, supports data rates up to 200 Mbps, and features Schmitt-trigger inputs for improved noise immunity. Provides 3-state outputs (OE control), push-pull output drivers, partial power-down support (Ioff), and is 5.5 V tolerant on the I/O side when powered appropriately. Specified for operation over a −40°C to +125°C temperature range and housed in a 14-pin TSSOP package. #TexasInstruments #TXU0304 #TXU0304PWR #LevelTranslator #VoltageTranslator #LogicLevelShifter #4BitTranslator #SchmittTrigger #TriStateOutput #DigitalLogic #TSSOP14 #EmbeddedSystems

IoT Secure Element with EdgeLock® SE051 Security Technology – Hardware-based secure element IC designed for IoT security, connected devices, industrial automation, smart home systems, automotive applications, cloud authentication, and embedded cybersecurity solutions. Provides a tamper-resistant secure environment for cryptographic key storage, device identity protection, secure authentication, and trusted communication. Features Common Criteria EAL5+ certified secure hardware, EdgeLock® secure architecture, ECC and RSA cryptographic support, AES encryption/decryption, SHA-2 hashing, HMAC, True Random Number Generator (TRNG), secure key generation, and secure object storage for protecting sensitive credentials and certificates. Supports I²C communication interface with host microcontrollers and is compatible with secure cloud platforms and IoT provisioning workflows. Operates from a 1.71 V to 3.6 V supply, supports −40°C to +105°C industrial temperature operation, and is housed in a compact 20-HX2QFN (3 × 3 mm) surface-mount package. #NXP #SE051C2HQ1Z01XDZ #EdgeLockSE051 #SecureElement #IoTSecurity #HardwareSecurity #Cryptography #SecureAuthentication #AES #ECC #RSA #TRNG #IndustrialIoT #EmbeddedSystems

M.2 PCIe Gen4 Edge Card Connector – 67-position M.2 Key E edge card connector for PCI Express® Gen4 module interconnection. Features a 0.50 mm pitch, right-angle surface-mount solder termination, 67 contacts, 16 Gb/s data rate, and 1 A current rating. Supports 0.80 mm PCB/module thickness and includes board guides, 30 µin (0.76 µm) gold-plated copper alloy contacts, and a liquid crystal polymer (LCP) housing. Specified for an operating temperature range of −40°C to +85°C. #Amphenol #AmphenolICC #MDT420E01411 #M2Connector #PCIeGen4 #KeyE #EdgeCardConnector #67Position #0_5mmPitch #SurfaceMount #HighSpeedConnector #EmbeddedSystems

Dual Non-Inverting Open-Drain Buffer IC – Dual non-inverting buffer with open-drain outputs for logic level translation, bus interfacing, signal buffering, wired-AND logic, and embedded digital systems. Operates from a 1.65 V to 5.5 V supply and features two independent 1-bit buffer channels capable of sinking up to 32 mA per output. The open-drain outputs allow direct interfacing with multiple voltage domains using external pull-up resistors, making the device suitable for I²C buses, interrupt lines, LED driving, and mixed-voltage logic applications. Features high-speed CMOS operation, low static power consumption, 5.5 V input tolerance, and is specified for operation over a −40°C to +85°C ambient temperature range. Housed in a 6-pin SC-88 (SC-70-6 / SOT-363) surface-mount package. #onsemi #NC7WZ07P6X #LogicBuffer #OpenDrain #NonInvertingBuffer #LogicIC #LevelShifter #I2C #SignalBuffer #WiredAND #SC88 #EmbeddedSystems

High-Speed Logic Output Optocoupler – Single-channel high-speed optocoupler designed for digital signal isolation, industrial automation, PLCs, motor drives, switching power supplies, data communication, microcontroller interfaces, and embedded control systems. Features an open-collector TTL-compatible output with a 15 MBd data rate, 5 kVrms isolation voltage, and 10 kV/µs minimum common-mode transient immunity (CMTI) for reliable operation in noisy electrical environments. Provides 75 ns maximum propagation delay, 22 ns typical rise time, 6.9 ns typical fall time, and supports up to 50 mA output current. The input consists of a GaAs infrared LED with a 1.38 V typical forward voltage and 20 mA maximum forward current. Operates from a 4.5 V to 5.5 V output-side supply, over a −40°C to +85°C temperature range, and is housed in a compact 8-pin SOIC (SMD) package for space-efficient PCB designs. #LiteOn #6N137STA1 #6N137 #Optocoupler #LogicOptocoupler #DigitalIsolation #HighSpeedIsolation #IndustrialAutomation #MotorDrive #PLC #EmbeddedSystems

Accelerometer, Gyroscope, Temperature, 6 Axis Sensor I2C, I3C, SPI Output The ASM330LHHX is a 6-axis IMU featuring a 3-axis digital accelerometer and a 3‑axis digital gyroscope with an extended temperature range up to +105°C, designed to address automotive nonsafety applications. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes to serve both the automotive and consumer markets. The ASM330LHHX is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. All the parts are fully tested with respect to temperature to ensure the highest quality level. The sensing elements are manufactured using ST’s proprietary micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit, which is trimmed to better match the characteristics of the sensing element. Features • AEC-Q100 qualified • Android Auto™ compliant and CarPlay® compliant • Extended temperature range from -40 to +105°C • Embedded compensation for high stability over temperature • Accelerometer user-selectable full scale up to ±16 g • Extended gyroscope range from ±125 to ±4000 dps • Dual operating modes: high-performance and low-power mode • I²C, MIPI I3C℠, and SPI serial interfaces • Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms • Programmable finite state machine • Machine learning core • Smart programmable interrupts • Embedded 3 KB FIFO available to underload host processor • ECOPACK and RoHS compliant Applications • Dead reckoning (DR) • Vehicle-to-everything (V2X) • Telematics, e-tolling • Antitheft systems • Impact detection and crash reconstruction • Motion-activated functions • Driving comfort • Vibration monitoring and compensation #ASM330LHHXTR #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #AutomotiveElectronics #MotionSensor #MachineLearning #SensorFusion #AECQ100 #EmbeddedSystems

Automotive H-Bridge DC Motor Driver IC – Fully integrated 40 V H-bridge motor driver with integrated power MOSFETs for brushed DC motors and one winding of a bipolar stepper motor. Operates from a 4 V to 40 V supply, delivers up to 5 A continuous output current, and features a PWM control interface with integrated current-sense output for motor monitoring. Includes an internal charge pump for high-side gate drive, low-RDS(on) MOSFETs, current regulation, undervoltage lockout (UVLO), overcurrent protection (OCP), thermal shutdown, and shoot-through protection. Qualified to AEC-Q100 Grade 1, operates over a −40°C to +125°C junction temperature range, and is housed in an 18-pin QFN (3 × 4 mm) wettable-flank package. #MonolithicPowerSystems #MPS #MPQ6612AGLEAEC1P #MPQ6612A #MotorDriver #HBridge #BrushedDCMotor #StepperMotor #CurrentSense #PWM #PowerMOSFET #AECQ100 #Automotive #EmbeddedSystems

Ultra-Low-Power Arm® Cortex®-M33 Microcontroller – 32-bit ultra-low-power microcontroller based on the Arm® Cortex®-M33 core with TrustZone® security for industrial IoT, wearable devices, smart sensors, medical equipment, home automation, metering, and battery-powered embedded applications. Operates at up to 160 MHz with 1 MB Flash memory, 786 KB SRAM, and a 1.71 V to 3.6 V supply voltage, delivering high performance while minimizing power consumption. Features single-precision FPU, DSP instructions, Memory Protection Unit (MPU), TrustZone® hardware security, 11-channel 12-/14-bit ADC, 2-channel 12-bit DAC, USB 2.0 Full-Speed OTG, CAN FD, I²C, SPI, UART/USART, SAI, SPDIF, LIN, SmartCard, motor-control PWM, DMA, Octo-SPI/Quad-SPI memory interface, AES-256, PKA, HASH, TRNG, secure boot, and tamper detection for secure, energy-efficient embedded designs. Provides 37 GPIOs, operates over a −40°C to +85°C temperature range, and is housed in a 48-pin LQFP (7 × 7 mm) package. #STMicroelectronics #STM32U575CGT6 #STM32U5 #CortexM33 #UltraLowPowerMCU #TrustZone #SecureMCU #IndustrialIoT #USBOTG #CANFD #EmbeddedSecurity #EmbeddedSystems

CYW43439, RP2040 - 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board Raspberry Pi Pico W / SC0918 Wireless Microcontroller Development Board designed for embedded applications, featuring the Raspberry Pi RP2040 microcontroller with dual-core Arm Cortex-M0+ processor running at up to 133 MHz, 264 kB SRAM, 2 MB onboard flash memory, and integrated 2.4 GHz 802.11n wireless LAN connectivity. The board provides GPIO, SPI, I²C, UART, ADC, PWM, and USB 1.1 interfaces for flexible hardware integration. #RaspberryPi #PicoW #RP2040 #WirelessMCU #EmbeddedSystems #IoT #DevelopmentBoard