I’ll review the part metadata and existing symbol/footprint, find and set the official datasheet URL if missing, then cross-check pins/pads and summarize any mismatches.
The part already has a Datasheet URL, but it points to a Mouser-hosted copy; I found the official ROHM PDF and will use that for verification, updating the property only if the part-level editor accepts it.
Completed the part review and created the detailed audit in BD9G341AEFJ-E2 Part Audit. The symbol pin numbers/names and 9-pad HTSOP-J8 footprint generally match the ROHM datasheet; key issues flagged are wrong indexed part type (Transistors), missing explicit package property, unspecified pin types, missing pin descriptions, and an unconfirmed Datasheet URL update to the official ROHM PDF.
Open items:
Datasheet property still appeared indexed as the Mouser-hosted copy after the update attempt.
Pin descriptions/types and part taxonomy should be cleaned up if you want this part library-ready.
Suggested next steps:
Update part metadata: part type, package/case, and datasheet URL.
Add datasheet-backed pin descriptions and pin types.
Run a final footprint/3D alignment and DFM check against ROHM HTSOP-J8 land-pattern guidance.