Energy Harvesting Wireless Sensor, IoT, Smart Wearables PMIC 16-QFN #dc #solar #harvesting

Humidity, Temperature 0 ~ 100% RH I2C ±2% RH 8 s Surface Mount The SHTC3-TR-10KS is an ultra-low-power digital humidity and temperature sensor from Sensirion designed for space-constrained and battery-powered applications such as wearables, mobile devices, IoT sensors, smart home products, and environmental monitoring systems. It integrates calibrated humidity and temperature sensing elements with a digital I²C interface in a compact 2 mm × 2 mm DFN package. Key Features Measures both relative humidity and temperature Humidity accuracy of up to ±2% RH Wide humidity measurement range: 0% to 100% RH Integrated digital I²C interface Ultra-low power consumption optimized for battery-operated devices Supply voltage range: 1.62 V to 3.6 V Compact 4-pin DFN (2 × 2 mm) surface-mount package Fully calibrated and temperature compensated Fast response time suitable for real-time environmental sensing Operating temperature range: −40°C to +125°C Supports sleep and low-power operating modes for portable electronics Typical Applications Wearable devices Smartphones and tablets HVAC and smart thermostats IoT environmental monitoring Home automation systems Portable weather stations Consumer electronics #CommonPartsLibrary #Sensor

MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule

IC RF TxRx + MCU Bluetooth Bluetooth v5.3 2.4GHz 48-VFQFN Exposed Pad NRF52832-QFAA-R7 is an ultra-low-power wireless System-on-Chip (SoC) from Nordic Semiconductor, designed for Bluetooth Low Energy (BLE), ANT, NFC, and proprietary 2.4 GHz wireless applications. It integrates a high-performance ARM Cortex-M4F processor, memory, peripherals, and a 2.4 GHz radio into a single chip, making it ideal for IoT devices, wearables, wireless sensors, beacons, and smart peripherals. GHz protocols • 2.4 GHz transceiver • -96 dBm sensitivity in Bluetooth® low energy mode • Supported data rates: 1 Mbps, 2 Mbps Bluetooth® low energy mode • -20 to +4 dBm TX power, configurable in 4 dB steps • On-chip balun (single-ended RF) • 5.3 mA peak current in TX (0 dBm) • 5.4 mA peak current in RX • RSSI (1 dB resolution) • ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz • 215 EEMBC CoreMark® score running from flash memory • 58 μA/MHz running from flash memory • 51.6 μA/MHz running from RAM • Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and instrumentation trace macrocell (ITM) • Serial wire debug (SWD) • Trace port • Flexible power management • 1.7 V–3.6 V supply voltage range • Fully automatic LDO and DC/DC regulator system • Fast wake-up using 64 MHz internal oscillator • 0.3 μA at 3 V in System OFF mode • 0.7 μA at 3 V in System OFF mode with full 64 kB RAM retention • 1.9 μA at 3 V in System ON mode, no RAM retention, wake on RTC • Memory • 512 kB flash/64 kB RAM • 256 kB flash/32 kB RAM • Nordic SoftDevice ready • Support for concurrent multi-protocol • Type 2 near field communication (NFC-A) tag with wakeup-on-field and touchto-pair capabilities • 12-bit, 200 ksps ADC - 8 configurable channels with programmable gain • 64 level comparator • 15 level low power comparator with wakeup from System OFF mode • Temperature sensor • 32 general purpose I/O pins • 3x 4-channel pulse width modulator (PWM) unit with EasyDMA • Digital microphone interface (PDM) • 5x 32-bit timer with counter mode • Up to 3x SPI master/slave with EasyDMA • Up to 2x I2C compatible 2-wire master/slave • I2S with EasyDMA • UART (CTS/RTS) with EasyDMA • Programmable peripheral interconnect (PPI) • Quadrature decoder (QDEC) • AES HW encryption with EasyDMA • Autonomous peripheral operation without CPU intervention using PPI and EasyDMA • 3x real-time counter (RTC) • Single crystal operation • Package variants • QFN48 package, 6 × 6 mm • WLCSP package, 3.0 × 3.2 mm #CommonPartsLibrary #IntegratedCircuit

0.35 BB CONN. H=0.6 SSB6 RP REC ASSY 5050660622 is a 6-position board-to-board (mezzanine) receptacle connector from the Molex SlimStack™ Armor 505066 Series. It is designed for compact electronic devices where a very low-profile connection between two PCBs is required. The connector features a fine 0.35 mm pitch, 0.60 mm mated height, and surface-mount termination, making it suitable for smartphones, wearables, IoT devices, cameras, and other space-constrained applications. Key Features 6 circuits (contacts) for board-to-board interconnection. 0.35 mm pitch for high-density PCB designs. Ultra-low 0.60 mm mated height to minimize product thickness. 2-row connector configuration for efficient space utilization. Surface-mount (SMT) mounting for automated assembly. Armor Nail design improves solder joint strength and mechanical retention. Gold-plated contacts for reliable electrical performance and corrosion resistance. 50 V AC/DC voltage rating. Up to 0.3 A per contact current rating. Operating temperature range: -40°C to +85°C. Liquid Crystal Polymer (LCP) housing for high heat resistance during reflow soldering. 30 mating cycle durability. Typical Applications Smartphones and tablets Wearable devices Wireless modules Portable medical devices Cameras and imaging equipment Compact consumer electronics #CommonPartsLibrary #Connector

InvenSense MPU-60X0 / MPU-6000 / MPU-6050 6-axis MotionTracking IMU, integrating 3-axis gyroscope, 3-axis accelerometer and Digital Motion Processor (DMP) in a compact 4 x 4 x 0.9mm QFN package. Features programmable gyroscope ranges ±250/±500/±1000/±2000 dps, programmable accelerometer ranges ±2g/±4g/±8g/±16g, 16-bit ADCs, 1024-byte FIFO, embedded temperature sensor, I2C interface up to 400kHz and SPI interface up to 1MHz/20MHz on MPU-6000, 2.375V to 3.46V supply range, designed for motion sensing, gesture control, image stabilization, navigation, wearables, smartphones, tablets and embedded motion-control applications. Search Keywords: MPU-60X0, MPU-6000, MPU-6050, InvenSense MPU-6050, InvenSense MPU-6000, 6-axis IMU, 3-axis gyroscope accelerometer, MotionTracking sensor, Digital Motion Processor, DMP IMU, I2C IMU sensor, SPI IMU sensor, MPU6050 accelerometer gyroscope, MPU6000 gyro, QFN 4x4mm IMU, motion sensor module Hashtags: #MPU60X0 #MPU6000 #MPU6050 #InvenSenseMPU6050 #IMUSensor #6AxisIMU #Accelerometer #Gyroscope #MotionTracking #DigitalMotionProcessor #DMP #I2CSensor #SPISensor #MotionSensor #QFN24

Battery Management ICs BQ25120AYFPT DSBGA-25_L2.6-W2.5-R5-C5-P0.40-BL LCSC Part Number: C2861317 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments bq25120A highly integrated low-Iq battery charge management IC for wearables and IoT devices, supports up to 300mA battery charge current, configurable 300mA buck regulator with 1.8V default output, configurable load switch or 100mA LDO output, power path management, battery voltage regulation from 3.6V to 4.65V in 10mV steps, configurable termination current down to 500µA, simple voltage-based battery monitor, push-button wake-up and reset, I2C control interface, 3.4V to 5.5V input voltage range, low quiescent current, suitable for smart watches, fitness accessories, medical wearables and rechargeable toys, 25-ball DSBGA 2.5 x 2.5mm package. Search Keywords: bq25120A, Texas Instruments bq25120A, TI bq25120A, BQ25120A battery charger, bq25120A PMIC, bq25120A wearable charger, bq25120A IoT charger, low Iq battery charger IC, integrated battery charge management IC, 300mA battery charger, power path battery charger, I2C battery charger, bq25120A buck regulator, bq25120A LDO, bq25120A DSBGA-25, bq25120A 2.5x2.5mm, bq25120A datasheet Hashtags: #bq25120A #BQ25120A #TexasInstrumentsBQ25120A #TIBatteryCharger #BatteryChargerIC #BatteryChargeManagement #WearablePMIC #IoTPMIC #LowIqCharger #PowerPathManagement #300mACharger #BuckRegulatorPMIC #I2CCharger #LiIonCharger #WearableCharger #DSBGA25 #25BallDSBGA

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) Absolute 10-WFLGA The BMP581 is a high-precision digital barometric pressure sensor designed for altitude tracking, environmental monitoring, navigation, weather sensing, and industrial measurement applications. It integrates a MEMS pressure sensing element with a low-noise analog front end and digital signal processing to deliver highly accurate pressure and temperature measurements over a wide operating range. The device supports low-power operation, making it suitable for portable, battery-powered, and always-on sensing systems. The sensor communicates through standard digital interfaces and includes configurable sampling, filtering, and interrupt features for flexible system integration. Its compact package enables use in space-constrained embedded designs such as wearables, mobile devices, drones, smart home systems, IoT devices, and industrial instrumentation. Engineering Specification Device Type Digital barometric pressure and temperature sensor Manufacturer Bosch Sensortec Pressure Measurement High-resolution absolute pressure measurement with integrated temperature compensation Temperature Measurement Integrated digital temperature sensing for environmental monitoring and pressure compensation Pressure Range Wide atmospheric pressure sensing range suitable for altitude and environmental applications Interface Support I²C and SPI digital communication interfaces Supply Voltage Low-voltage operation optimized for embedded and portable systems Power Consumption Ultra-low power modes with configurable performance and sampling settings Measurement Features Oversampling support with programmable output data rate and internal filtering Accuracy High absolute and relative pressure accuracy for precise altitude estimation and environmental sensing Noise Performance Low-noise sensor architecture for stable pressure readings and improved altitude resolution Interrupt Features Configurable interrupt generation for data-ready and threshold-based events FIFO Support Integrated FIFO buffering for efficient sensor data management Operating Temperature Industrial temperature operating capability for consumer and industrial environments Package Type Compact surface-mount package optimized for small PCB footprint designs Applications Altitude tracking, indoor navigation, weather stations, drones, wearable electronics, IoT sensing, HVAC systems, industrial monitoring, and portable devices #CommonPartsLibrary #Sensor #Transducer #PressureSensor

CONN HEADER SMD R/A 3POS 1.25mm The SM03B-GHS-TB(LF)(SN) is a 3-pin, surface-mount, right-angle header connector that mates with JST GH-series wire housings. It provides a reliable, low-profile connection between a PCB and external wires using a crimp-style mating system. It belongs to the JST GH series, known for fine-pitch, compact connectors optimized for miniaturized electronics. 3-position connector (signal/power lines) 1.25 mm pitch for high-density PCB layout Surface-mount, right-angle (horizontal) mounting Shrouded header design for secure mating and alignment Locking ramp mechanism to prevent accidental disconnection Tin-plated contacts for reliable conductivity Lead-free / RoHS compliant (LF/SN finish) Current rating: ~1 A typical Voltage rating: ~50 V Operating temperature: approx. -25 °C to +85 °C 📦 Typical Applications Consumer electronics (wearables, IoT devices) Industrial control modules Robotics and sensor interfaces Battery-powered embedded systems Compact PCB interconnect systems #CommonPartsLibrary #Connector

The DW01A is a compact single-cell lithium-ion/lithium-polymer battery protection IC designed to safeguard rechargeable batteries from unsafe operating conditions such as overcharge, overdischarge, overcurrent, and short circuits. It is widely used in battery packs, power banks, TP4056 charging modules, portable electronics, and IoT devices because of its low power consumption and minimal external component requirements. Key Features Single-cell Li-ion/Li-Po battery protection Overcharge protection (typically 4.3V) Overdischarge protection (typically 2.4V) Overcurrent and short-circuit protection Ultra-low quiescent current (~3µA typical) Very low standby/discharge current Drives external dual MOSFETs for charge/discharge control Internal delay timers for noise immunity No external timing capacitors required Compact SOT-23-6 package Wide operating voltage range Automatic recovery after fault removal Typical Applications 18650 battery protection boards Power banks Bluetooth devices Wearables Portable consumer electronics DIY battery-powered projects TP4056 charging modules with protection circuitry #CommonPartsLibrary #IntegratedCircuit #PowerManagement