Battery management system PCB-A for an off-grid 12 V AGM lead-acid battery with current sensing, voltage and temperature monitoring, ESP32 control, relay output, split PGND/AGND grounding, and JLCPCB-ready 2-layer layout constraints.

Cow health-monitoring wearable PCB for a cow-mounted device. Rear strap electronics target 20-25 g and front sensing assembly target about 15 g. Uses an ESP32-based sensor controller, 200 mAh LiPo battery, battery charging circuitry, and interfaces for ammonia, methane, IR temperature, and saliva sensing. Design must tolerate moisture, mucus, debris, vibration, fur contact, and tongue/lick exposure while remaining compact and lightweight for wearable use.

Wearable closed-loop ultrasonic monitoring and transcutaneous neuromodulation system based on ESP32-C3, powered from a 7.4 V 1000 mAh LiPo battery with TP4056 charging, MT3608 boost conversion, AMS1117-3.3 regulation, JSN-SR04T ultrasonic sensing, LED and buzzer alerts through a BC547 driver, and a reserved neuromodulation interface for future integration.

Industrial dual motor controller using an ESP8266 NodeMCU and L298N dual H-bridge for 2x 12V 2A DC motors, with MQTT remote control, manual override buttons, 5-bit DIP addressing, reset input, status LEDs, SS34 reverse-polarity protection, 5A fuse, LM2596 5V buck conversion, TVS surge protection, and future expansion provisions for INA219 current sensing, OTA firmware, RS485, and enclosure integration.

SCADA Sensor Node v2.1 using a Heltec WiFi LoRa 32 V4 module with separate +5V and board-generated +3V3 rails, ADS131M08 8-channel ADC front end, TCA9548A I2C multiplexer, TMP102-based fan control, ULN2003A relay and fan driver, CT/pressure/analog/One-Wire/vibration/humidity/Qwiic/flow/digital sensor interfaces, relay outputs, fan connector, brownout sensing, and a 200 mm x 140 mm 2-layer layout with Heltec keepout, antenna clearance, mounting holes, and DIN-rail slots.

Compact wearable smart cat collar PCB focused on ultra-low power, miniaturized size, curved-edge waterproof-friendly mechanical fit, GNSS tracking, motion sensing, RFID compatibility, Li-ion charging, and robust mass-production readiness.

Wearable health device prototype schematic with ECG sensing via AD8232, motion sensing via BNO085 or BMI270 IMU breakout, on-board processing using TI TM4C123G LaunchPad or MSPM0G3507 LaunchPad, optional ESP8266 Wi-Fi, LiPo battery charging with MCP73831, regulated 3.3 V power from TPS63031 buck-boost or AP2112 LDO prototype option, and user interfaces including electrode connector, JST battery connector, programming header, and optional on/off switch.

Self-Powered RF Transceiver Module for EM Sensing with RF Prescaler, Divider Chain, and ESP32-S3 Interface

Compressor PCB - ESP32-S3 HVAC field sensing (24 VAC + CT + UART)

Coffee Waker main control board for an alarm-enabled coffee maker. It coordinates wake-up functions including brewing-related control, lighting, audio, sensing, and appliance interfacing to prepare and signal a scheduled wake-up experience.

Power Tree and Actuator Driver with Robust Filtering, Current Sensing, PGOOD Sequencing, and Star-Tie Grounding

ESP32-Based Compact Vehicle Sensing Board with Ultrasonic, IMU, Wheel Encoder, and LED Indicators (2-Layer PCB)

Smart Wellhead Controller V1.1: ESP32 + LoRa Industrial IoT Node with Solar Power, Deep-Sleep Leak Sensing, and OLED HMI. Now upgraded with a solar charging and battery management stage featuring a TP4056/CN3791 charger IC, power-path switching, Li-ion battery protection, and integrated 3.3 V rail supply. #PowerBlock #SolarCharging #BMS

Non-Isolated Synchronous 4-Switch Buck-Boost DC-DC Converter for PV Optimization (JKM610N-78HL4, 45.39 V @ 9.23 A MPP to 85 V, 50 kHz) with TI C2000 PI Control, Integrated Sensing, and Full Protections

Stereo 3‑Band Active Audio Equalizer and Mono Preamplifier using TL072 and LM386 with Right‑Angle PCB‑Edge CUI SJ1‑3535NG TRS Jacks for Jack Sensing and Routing

Smart Chair V1: ESP32-C3-based seat-occupancy and posture sensing hub with 4× FSR channels and IMU over I2C, featuring corrected USB-C power wiring with TVS protection, remapped I2C on IO4/IO5 with pull-ups, dedicated PROG_TX/PROG_RX/BOOT/EN test pads, and antenna keep-out zone #consumer-electronics #BLE #I2C #USB-C #IoT

Dual-FOC Brushless DC Motor Controller with Integrated USB-C PD and Current Sensing

Ultra‑low‑power LoRa data logger for long‑range sensing. Logs to onboard flash/SD, I2C sensor-ready, battery powered with charger, RP2350 control, robust RF front-end for reliable remote telemetry.

i want to build a pcb for an electrical energy datalogger , this datalogger is composed by : an esp32 as a main microcontroller, two ATM90 As an ic circuits for energy calculation , 6 input for a ct clamp sensor every 3 is connected by an ic , an input for power and at the same time as a voltage sensing , a regulator to get down the voltage drom 220 to 5v

The Coffee Waker is a unique, full-featured coffee maker alarm clock designed to brighten your morning routine with the irresistible aroma of freshly brewed coffee. By seamlessly integrating multiple high-performance components onto a single main board, the Coffee Waker delivers both functionality and innovation: - **Processing & Connectivity:** Powered by an ESP32-S3, it offers built-in WiFi and Bluetooth, enabling smart scheduling, remote control, and over-the-air updates. - **Precision Sensing:** A 16-bit load cell ADC provides accurate measurements, ensuring precise weight sensing for coffee bean dosing or liquid volume monitoring. - **Quality Audio Output:** The onboard 16-bit MP3 DAC guarantees clear audio playback, from alarm sounds to any custom wake-up messages you program. - **Robust Power Handling:** With a 120V heater cartridge relay and a 12V wakeup light converter integrated, the board safely manages high voltage switching and provides a visually soothing light routine. - **Thoughtful Integration:** Designed with automotive-grade components, precision regulators, and careful signal routing, the Coffee Waker Main Board combines performance with reliability while keeping a compact footprint. Overall, the Coffee Waker transcends the ordinary alarm clock, merging daily utility with modern connectivity and a touch of luxury—making it the perfect addition to any nightstand. #CoffeeWaker #SmartHome #CoffeeMaker #AlarmClock #MorningRoutine #Technology #Innovation

The Coffee Waker is a unique, full-featured coffee maker alarm clock designed to brighten your morning routine with the irresistible aroma of freshly brewed coffee. By seamlessly integrating multiple high-performance components onto a single main board, the Coffee Waker delivers both functionality and innovation: - **Processing & Connectivity:** Powered by an ESP32-S3, it offers built-in WiFi and Bluetooth, enabling smart scheduling, remote control, and over-the-air updates. - **Precision Sensing:** A 16-bit load cell ADC provides accurate measurements, ensuring precise weight sensing for coffee bean dosing or liquid volume monitoring. - **Quality Audio Output:** The onboard 16-bit MP3 DAC guarantees clear audio playback, from alarm sounds to any custom wake-up messages you program. - **Robust Power Handling:** With a 120V heater cartridge relay and a 12V wakeup light converter integrated, the board safely manages high voltage switching and provides a visually soothing light routine. - **Thoughtful Integration:** Designed with automotive-grade components, precision regulators, and careful signal routing, the Coffee Waker Main Board combines performance with reliability while keeping a compact footprint. Overall, the Coffee Waker transcends the ordinary alarm clock, merging daily utility with modern connectivity and a touch of luxury—making it the perfect addition to any nightstand. #CoffeeWaker #SmartHome #CoffeeMaker #AlarmClock #MorningRoutine #Technology #Innovation

A presence sensing device powered by a mean well AC DC converter with a ESP32 C3 for it's brain plus a ld2410 mmwave module. the relay can be used to switch mains power. the ld2410 is connected through the terminal connectors.

The OPAx863 series from Texas Instruments includes the OPA863, OPA2863, and OPA4863, which are low-power, rail-to-rail input/output, voltage-feedback operational amplifiers designed for high-performance applications. These amplifiers feature a unity-gain bandwidth of 110 MHz, a gain-bandwidth product of 50 MHz, and a low quiescent current of 700 µA per channel. The devices operate across a wide supply voltage range of 2.7 V to 12.6 V, making them suitable for both portable and battery-powered systems. With a slew rate of 105 V/µs, 5.9 nV/√Hz input voltage noise, and exceptional harmonic distortion performance (-129 dBc HD2, -138 dBc HD3 at 20 kHz for 2 Vpp output), the OPAx863 is adept for driving SAR and ΔΣ ADCs, acting as ADC reference buffers, low-side current sensing, photodiode TIA interfaces, and other high-precision tasks. Additional features include overload power limiting, output short-circuit protection, and a power-down mode with minimal quiescent current, making the OPAx863 series a versatile and robust choice for applications requiring low power and high-precision analog performance. The series includes single, dual, and quad-channel configurations available in various surface-mount packages to fit different design requirements.

The ADA4084-1, ADA4084-2, and ADA4084-4, manufactured by Analog Devices, Inc., are a series of low-power, rail-to-rail input/output operational amplifiers designed to operate from a single supply voltage ranging from +3 V to +30 V (or ±1.5 V to ±15 V). These amplifiers are characterized by their low noise performance (3.9 nV/√Hz at 1 kHz typical), low offset voltage (100 uV maximum for the SOIC package), and low power consumption (0.625 mA typical per amplifier at +15 V). With a gain bandwidth product of 15.9 MHz and a slew rate of 4.6 V/μs typical, these amplifiers are suitable for a broad range of applications, including battery-powered instrumentation, high-side and low-side sensing, power supply control and protection, and telecommunications among others. The ADA4084 series is available in various package options, ensuring flexibility and compatibility for different design requirements. Notably, the long-term drift and temperature hysteresis are meticulously engineered for consistent performance over time and across temperature variations, making these amplifiers robust choices for applications demanding precision and stability.

Consumer USB-C powered temperature/humidity sensor node using a low-power Wi‑Fi + BLE MCU, protected 5 V input, and 3.3 V sensing/control rail.