Analog Devices AD74413R is a quad-channel software-configurable analog and digital input/output (I/O) controller designed for industrial automation, process control, building management, and smart sensing systems. Each channel can be independently configured as voltage input, current input, voltage output, current output, digital input, RTD temperature measurement, or thermocouple interface, enabling highly flexible universal I/O architectures. The device integrates four 16-bit sigma-delta ADCs, four 13-bit DACs, precision voltage references, diagnostics, open-circuit and short-circuit detection, internal temperature monitoring, and HART communication support. Communication with the host processor is performed through an SPI interface. The AD74413R simplifies PLC, DCS, remote I/O, industrial sensor, actuator, and process instrumentation designs by replacing multiple dedicated analog front-end components with a single programmable I/O solution. Search Keywords: AD74413R, Analog Devices universal I/O, software configurable I/O, industrial I/O controller, analog input output IC, programmable PLC I/O, process control interface, RTD measurement IC, thermocouple interface IC, HART compatible I/O, SPI industrial interface, voltage input output controller, current loop controller, universal analog front end, remote I/O module IC, industrial automation controller AD74413R Hashtags: #AD74413R #AnalogDevices #UniversalIO #IndustrialAutomation #ProcessControl #PLC #RemoteIO #HART #RTD #Thermocouple #AnalogInput #AnalogOutput #CurrentLoop #IndustrialElectronics #SPIInterface #DAC #ADC #BuildingAutomation #Instrumentation #ElectronicComponentsQuad-Channel, Software Configurable Input and Output

QFN-68-EP(7x7) Power Management - Specialized RoHS The RK809-5 is a highly integrated Power Management Integrated Circuit (PMIC) from Rockchip designed for multi-core processor systems and embedded applications. It provides a complete power management solution by integrating multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, battery fuel gauging, RTC functionality, and audio codec capabilities into a single device. The RK809-5 is commonly used alongside Rockchip SoCs in single-board computers, tablets, AIoT devices, and industrial embedded systems. Key Features Five high-efficiency synchronous buck converters with fast transient response. Nine low-dropout (LDO) voltage regulators for powering sensitive analog and digital circuits. Integrated battery fuel gauge for battery capacity monitoring. Configurable power-up and power-down sequencing (OTP programmable). Dynamic Voltage Scaling (DVS/DVFS) support via I²C interface. Integrated Real-Time Clock (RTC) with 32.768 kHz crystal oscillator support. Two integrated load switches for peripheral power control. Over-current, over-voltage, and thermal protection features. Built-in audio CODEC with headphone driver and Class-D amplifier support. Designed to minimize external component count and simplify power system design. QFN-68-EP (7 mm × 7 mm) package. #RK8095 #RK809 #Rockchip #PMIC #PowerManagementIC #BatteryManagement #AudioCodec #RTC #DVFS #EmbeddedSystems #SingleBoardComputer #IoT #IndustrialElectronics #PowerSupplyDesign #ElectronicsEngineering

Board to Board & Mezzanine Connectors .050\" SEARAY High-Speed High-Density Open-Pin-Field Array Terminal 400 Position Connector High Density Array, Male Surface Mount, Right Angle Gold SEAM-40-01-L-10-2-RA-K-TR is a high-speed, high-density board-to-board mezzanine connector from the Samtec SEARAY™ series. It features a right-angle, surface-mount design with 400 positions arranged in a 10-row open-pin-field array on a 1.27 mm (0.050") pitch. The connector utilizes Samtec's Edge Rate® contact system, providing excellent signal integrity, durability, and support for high-speed differential pair routing in demanding communication, networking, and embedded computing applications. Key Features High-density 400-position open-pin-field array connector 1.27 mm (0.050") contact pitch for compact board-to-board interconnects Right-angle, surface-mount termination Rugged Edge Rate® contact system for reliable high-speed performance Supports high-speed serial protocols and differential pair routing Suitable for power, ground, and signal connections within the same connector Gold-plated contacts for enhanced reliability and corrosion resistance Board-guide feature for improved mating alignment Current rating up to 1.9 A per contact Voltage rating up to 240 VAC / 339 VDC Tape-and-reel packaging for automated assembly processes RoHS compliant and designed for high-reliability applications #Samtec #SEARAY #SEAM4001L102RAKTR #BoardToBoardConnector #MezzanineConnector #HighSpeedConnector #HighDensityInterconnect #EdgeRate #SurfaceMount #RightAngleConnector #EmbeddedSystems #TelecomEquipment #NetworkingHardware #IndustrialElectronics #PCBDesign

SDRAM - Mobile LPDDR4 Memory IC 48Gbit 2.133 GHz MT53E1536M32D4DT-046 WT:A is a high-density 48Gb (6GB) LPDDR4/LPDDR4X SDRAM memory device from Micron Technology. It is designed for high-performance, low-power applications requiring fast memory bandwidth and efficient power management. The device features a 32-bit data bus, supports data rates up to 4266 MT/s, and is packaged in a compact 200-ball FBGA, making it suitable for embedded computing, industrial systems, networking equipment, AI edge devices, automotive electronics, and mobile platforms. Key Features 48Gb (6GB) LPDDR4/LPDDR4X SDRAM Organized as 1.5G × 32 bits Data transfer rates up to 4266 MT/s Maximum clock frequency of 2133 MHz Low-power operation with 1.1V core supply 32-bit memory interface 200-ball FBGA package JEDEC LPDDR4-compliant architecture Per-bank refresh support Temperature-compensated refresh Self-refresh and deep power-down modes Partial-array self-refresh capability High bandwidth with reduced power consumption Optimized for compact embedded designs Operating temperature range: –30°C to +85°C Typical Applications Embedded Linux computers Single-board computers (SBCs) AI and edge computing platforms Industrial automation systems Networking and telecommunications equipment Automotive infotainment and control systems Tablets and mobile devices FPGA and SoC-based designs #commonpartslibrary #integratedcircuit #memory #dram #sdram #lpddr4 #lpddr4x #mobiledram #micron #embeddedsystems #embeddedcomputing #industrialelectronics #automotiveelectronics #edgecomputing #artificialintelligence #networking #telecommunications #highspeedmemory #lowpowerdesign #computerhardware #electroniccomponents #semiconductor #datasheet #fbga #memorychip #electronicsdesign #pcbdesign #hardwareengineering #electronicengineering #systemonchip #fpga #iot #internetofthings #computermemory #digitalelectronics #surfaceMount #smt #bga #storage #highperformancecomputing #hpc #mobiledevices #industrialautomation #electronicdesign #componentlibrary #fluxlibrary #parametricpart #eda #schematic #pcb #electronicdesignautomation #chipdesign #embeddedhardware #memorymodule #lowpowerelectronics #highbandwidthmemory #electronics #hardwaredevelopment #engineering #electricalengineering

Recom 2W Isolated DC-DC Converter, Vin 21.6 26.4 V dc, Vout 15 V dc, -9 V dc RECOM RxxP2xxyyD Series is a 2W isolated DC/DC converter designed specifically for SiC MOSFET and IGBT gate driver applications requiring asymmetric output voltages. The converter provides galvanically isolated dual outputs such as ±20V/-5V or +15V/-3V from a single DC input source. It features reinforced isolation up to 6.4kVDC, very low isolation capacitance (10pF max), high common-mode transient immunity (CMTI) of 65kV/µs, and a transformer with physically separated windings for improved noise immunity. The SIP7 package enables compact PCB integration in industrial power electronics, motor drives, renewable energy systems, EV charging, inverters, and high-voltage switching applications. The device is IEC/EN/UL62368-1 certified and optimized for reliable isolated gate driver power supplies. Search Keywords: RECOM RxxP2xxyyD, isolated DC-DC converter, SIP7 DC-DC converter, gate driver power supply, SiC gate driver converter, IGBT gate driver converter, isolated power module, ±15V isolated supply, ±20V isolated supply, high isolation DC-DC converter, 6.4kV isolation converter, low capacitance converter, CMTI 65kV/us converter, industrial DC-DC module, power electronics converter, motor drive power supply, inverter power supply Hashtags: #RECOM #RxxP2xxyyD #DCDCConverter #IsolatedPowerSupply #GateDriver #SiC #SiCMOSFET #IGBT #PowerElectronics #IndustrialElectronics #MotorDrive #InverterDesign #EVCharging #HighVoltage #GalvanicIsolation #SIP7 #EmbeddedPower #ElectronicComponents #PCBDesign #PowerSupplyModule

Coin, 20.0mm Lithium Manganese Dioxide 3 V Battery Non-Rechargeable (Primary) The CR2032 is a compact, coin-cell lithium battery widely used in portable electronic devices, providing long-lasting, stable power in a small form factor. It features a cylindrical shape with a flat positive terminal and a metal casing that serves as the negative terminal. Known for its high energy density and wide operating temperature range, this battery is ideal for memory backup, real-time clocks, small medical devices, remote controls, wearable electronics, and low-drain consumer electronics. Its reliability, shelf life, and lightweight design make it a standard choice for a broad range of compact electronic applications. Engineering Specifications Battery Type: Lithium Coin Cell Chemistry: Lithium Manganese Dioxide Standard Designation: CR2032 Nominal Voltage: 3 Volts Capacity: Typical Rated Capacity for Consumer Electronics Discharge Characteristics: Suitable for Low-Drain Applications Dimensions: Standard Diameter and Height for CR2032 Operating Temperature Range: Wide Range for Consumer and Industrial Use Shelf Life: Extended, Suitable for Long-Term Storage Terminals: Flat Positive Top, Metal Casing Negative Bottom RoHS Compliant: Yes Applications: Watches, Calculators, Motherboard CMOS Backup, Fitness Trackers, Remote Controls, Medical Devices, Sensors, Small Electronics #CR2032 #LithiumBattery #CoinCell #3Volt #LongLifeBattery #PortableElectronics #Wearables #ConsumerElectronics #MemoryBackup #LowDrainDevice #IndustrialElectronics #BatteryComponent #PCBDesign #CompactPower

2 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole ## Engineering Specification ## General Description The **1726040** is a Phoenix Contact **MKKDSN series PCB terminal block** designed for wire-to-board electrical connections in printed circuit board assemblies. It is used to provide a secure screw-clamp interface between external wiring and PCB circuitry. The component is suitable for control systems, industrial electronics, power distribution circuits, automation equipment, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1726040** Manufacturer: **Phoenix Contact** Product Series: **MKKDSN** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Mounting Type: **Through-Hole PCB Mount** Termination Method: **Screw Connection** ## Functional Description The device functions as a fixed printed circuit board terminal block that allows external conductors to be connected directly to a PCB. The screw-clamp mechanism secures the wire mechanically and electrically, providing a stable connection for signal or power circuits. The terminal block is intended for applications where field wiring must be removable, serviceable, and mechanically secure. ## Mechanical Description The component uses a compact green housing suitable for PCB-mounted assemblies. It is designed for side-entry conductor connection and horizontal board installation. The terminal block construction supports organized wire routing and convenient access for installation, maintenance, and service work. ## Electrical Description The terminal block is intended for low-voltage power and signal applications within the manufacturer’s specified current and voltage ratings. It provides reliable conductor contact when properly installed with compatible wire sizes and appropriate tightening torque. ## Material and Contact Description The connector housing is typically made from insulating material suitable for electrical safety and PCB assembly use. The internal conductive elements provide the electrical path between the inserted wire and the soldered PCB connection. Proper conductor preparation and screw tightening are required to maintain stable electrical performance. ## Mounting and Assembly Description The component is intended for through-hole solder mounting on a printed circuit board. Proper PCB hole sizing, pad layout, soldering process control, and mechanical clearance should be followed according to the manufacturer’s recommended design and assembly guidance. The terminal block should be mounted in a position that allows safe wire insertion and screw access. ## Application Suitability The **1726040** is suitable for industrial control boards, automation equipment, interface modules, power supply circuits, instrumentation, building control systems, relay boards, sensor wiring interfaces, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for wire gauge compatibility, current rating, voltage rating, tightening torque, creepage and clearance requirements, solder joint strength, and accessibility for field wiring. The terminal block should not be used beyond the manufacturer’s specified electrical, thermal, and mechanical limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkkdsn #wiretoboard #connector #interconnect #fixedterminalblock #screwterminal #throughholecomponent #pcbmount #industrialelectronics #automationequipment #controlsystems #powerdistribution #fieldwiring #electronicscomponents #electronicparts #hardwaredesign #pcbdesign #engineeringparts #componentlibrary #electronicsengineering

20 Watt DC/DC converter, medical, 4:1 input, 5000 VAC I/O-isolation (2 x MOPP), low leakage current, encapsulated, 1.6\" x 1\" THM20WI Series is a 20 W medical-grade isolated DC/DC converter family from TRACO Power designed for medical, industrial, transportation, control, measurement, and IGBT driver applications. The series features an ultra-wide 4:1 input voltage range, reinforced 5000 VAC isolation, low leakage current (<2.5 µA), and compliance with IEC/EN/ES 60601-1 (2 x MOPP) medical safety standards. Housed in a compact 1.6" × 1.0" package, the converters operate from -40°C to +80°C and provide high efficiency up to 89%. The THM20WI series is suitable for patient-connected medical equipment, industrial control systems, instrumentation, and high-reliability power conversion applications requiring reinforced isolation and long-term reliability. Search Keywords: THM20WI, THM20WI Series, TRACO Power THM20WI, Medical DC DC Converter, 20W DC DC Converter, Isolated DC DC Converter, 5000VAC Isolation, Reinforced Isolation Converter, IEC60601-1 Power Supply, Medical Power Module, 2xMOPP Converter, Wide Input DC DC Converter, Industrial Power Converter, IGBT Driver Power Supply, Measurement Equipment Power Supply, Medical Electronics Power Supply, High Isolation Converter, Embedded Power Module, PCB Mount DC DC Converter, TRACO Medical Converter Hashtags: #THM20WI #TRACOPower #DCDCConverter #MedicalPowerSupply #MedicalElectronics #IsolatedConverter #PowerModule #PowerElectronics #IEC60601 #MOPP #IndustrialElectronics #IGBTDriver #EmbeddedSystems #PowerSupplyDesign #ElectronicsDesign #PCBDesign #MedicalDevice #HighIsolation #IndustrialAutomation #HardwareDesign

The W25Q02JVSFIM from Winbond Electronics is a 2G-bit (256M x 8) Serial NOR Flash Memory device designed for high-density non-volatile data storage applications. It supports high-speed SPI, Dual/Quad SPI, QPI, and DTR interfaces, providing fast data transfer and efficient memory access for embedded systems. The device operates from a 2.7V to 3.6V supply voltage and is available in a 16-pin SOIC surface-mount package. It is suitable for applications such as firmware storage, boot code memory, industrial controllers, IoT devices, automotive electronics, and embedded systems requiring large-capacity reliable flash memory. Key Features Memory Density: 2G-bit Serial NOR Flash (256M x 8) Flash Technology: Single-Level Cell (SLC) NOR Flash Interface Support: Standard SPI, Dual SPI, Quad SPI, QPI, and DTR modes High-Speed Clock Frequency: Up to 133 MHz operation Fast Access Time: Approximately 7.5 ns Supply Voltage Range: 2.7V to 3.6V Non-Volatile Data Storage: Retains stored data without power Memory Organization: 256M x 8-bit architecture Package Type: 16-pin SOIC (7.50 mm width) surface-mount package Operating Temperature Range: -40°C to +85°C Page Program Time: Approximately 3.5 ms Applications: Embedded firmware storage, BIOS/boot memory, industrial equipment, IoT devices, and consumer electronics Hashtags #W25Q02JVSFIM #Winbond #SerialFlashMemory #NORFlash #SPIFlash #QuadSPI #QPI #DTR #EmbeddedSystems #NonVolatileMemory #FlashMemory #FirmwareStorage #IoT #IndustrialElectronics #Semiconductor #MemoryIC

WP-BUFU REDCUBE Bush, full height: 7mm, total height: 10.5mm, thread length: 4mm, pin length: 3.5mm, raster: 2.54mm, REDCUBE Press-Fit; M5, blind 4mm 16 Pin Screw Terminal, Power Tap M5 Through Hole The 7461147 is a high-current PCB-mounted power terminal from the REDCUBE® WP-BUFU series by Würth Elektronik. It is designed to provide a robust and low-resistance connection for transferring high currents between cables, busbars, and printed circuit boards. The terminal utilizes press-fit technology, eliminating the need for soldering while ensuring a gas-tight, vibration-resistant electrical connection. It is particularly suitable for power distribution, industrial equipment, automotive electronics, battery systems, and renewable energy applications. Key Features High current rating up to 180 A M5 screw terminal for secure high-power connections Press-fit termination for solderless PCB assembly 16-pin through-hole mounting configuration Gas-tight electrical connection for long-term reliability Excellent resistance to vibration and mechanical shock Low contact resistance for efficient power transfer Simplifies manufacturing by eliminating soldering processes Suitable for high-current power distribution and battery applications RoHS compliant design Typical Applications Power supplies and power converters Battery management and energy storage systems DC-DC and DC-AC converters Industrial automation equipment Automotive power electronics Solar and wind energy systems High-current PCB power distribution networks #CommonPartsLibrary #REDCUBE #PowerTerminal #PressFit #HighCurrentConnector #PCBTerminal #WurthElektronik #IndustrialElectronics #AutomotiveElectronics #PowerDistribution #EnergyStorage #RenewableEnergy #7461147

77 (55 + 22 Ground) Position Header, Male Pins Connector 0.079" (2.00mm) Through Hole The 5106081‑1 is a high-reliability male PCB connector manufactured by TE Connectivity. It belongs to the Z‑PACK 2 mm HM Series, designed for mezzanine and backplane board-to-board interconnects. The connector features precision-machined phosphor bronze contacts with tin plating, ensuring consistent electrical conductivity, low contact resistance, and long-term reliability. The device has a through-hole press-fit termination style for robust mechanical attachment to printed circuit boards and optimal compatibility with automated assembly processes. Its vertical orientation and standardized 2 mm pitch allow compact, high-density PCB layouts while maintaining reliable alignment and mating with compatible female headers. The connector is engineered to support repeated insertion cycles, high signal integrity, and consistent electrical performance in industrial, telecommunications, and embedded electronic applications. General Description The 5106081‑1 is a durable, 77-position male PCB connector intended for high-density board-to-board interconnect solutions. It provides secure electrical connections, mechanical stability, and long-term reliability in demanding electronic systems. Widely used in industrial automation, telecommunications, and embedded computing, this connector ensures precise mating, easy PCB integration, and robust operation in backplane and mezzanine applications. Its press-fit through-hole design, reliable contact material, and standardized footprint make it a versatile solution for complex multi-board electronic assemblies. #TEConnectivity #PCBConnector #MaleHeader #BoardToBoard #ZPACK #2mmPitch #HighDensityInterconnect #ThroughHole #PressFit #IndustrialElectronics #Telecommunications #EmbeddedSystems #ElectricalEngineering #ReliableConnection #EngineeringSpec #ElectronicConnector #HighPerformanceConnector

2 Position Wire to Board Terminal Block Horizontal with Board 0.150" (3.81mm) Through Hole ## Engineering Specification ## General Description The **1727010** is a Phoenix Contact **MKDS series PCB terminal block** designed for secure wire-to-board electrical connection in printed circuit board assemblies. It provides a compact screw-clamp termination interface for connecting external conductors to PCB circuitry. The component is suitable for industrial electronics, automation equipment, control modules, power interfaces, instrumentation, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1727010** Manufacturer: **Phoenix Contact** Product Name: **MKDS 1/ 2-3,81** Product Series: **MKDS** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed PCB terminal block that allows external wires to connect directly to the printed circuit board. The screw-clamp mechanism provides both mechanical conductor retention and electrical continuity between the field wiring and PCB circuit. This makes the component suitable for applications where wiring must be secure, serviceable, and accessible during installation or maintenance. ## Mechanical Description The terminal block uses a compact housing with side-entry conductor access and through-hole solder pins for stable PCB attachment. Its construction supports organized wire routing and practical access for conductor insertion and screw tightening. The design is suitable for compact board layouts where reliable field wiring connection is required. ## Electrical Description The component is intended for signal and low-voltage power connection applications within the manufacturer’s specified electrical ratings. It provides stable electrical contact when used with compatible conductor sizes, correct wire preparation, and proper screw tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements that transfer current from the inserted conductor to the soldered PCB pins. The screw connection with tension sleeve helps maintain reliable contact pressure and secure conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1727010** is intended for through-hole solder mounting on a printed circuit board. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidance. The component should be positioned to allow safe wire insertion, screwdriver access, and adequate clearance from nearby components or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, power supply interfaces, relay boards, instrumentation equipment, sensor wiring interfaces, building control systems, communication hardware, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current requirement, voltage rating, tightening torque, creepage and clearance spacing, solder joint strength, wire routing, and service access. The terminal block should not be used beyond the manufacturer’s specified electrical, mechanical, or environmental limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkds #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

SDRAM Memory IC 512Mbit Parallel 143 MHz 5.4 ns 54-TSOP II The AS4C32M16SB-7TCN is a single-data-rate synchronous dynamic random-access memory (SDR SDRAM) device manufactured by Alliance Memory. It is organized internally as a multi-bank array, allowing concurrent access operations across banks to improve effective memory bandwidth compared to simpler asynchronous DRAM architectures. The device is intended for general-purpose embedded memory applications where a synchronous, clock-driven memory interface is required, including embedded systems, industrial controllers, consumer electronics, networking equipment, and other designs that rely on a parallel SDRAM interface for working memory or buffering. As a drop-in style component within Alliance Memory's broader memory portfolio, this part is designed to be pin- and function-compatible with legacy SDR SDRAM devices originally offered by other manufacturers, allowing designers to source a continued-availability alternative for designs that depend on this memory architecture even as some original suppliers have discontinued production. This makes the device particularly useful in long-lifecycle industrial, embedded, and legacy system designs where a guaranteed supply of a specific memory interface and timing profile is critical to sustaining production over many years. The "B" designation in the part family indicates a specific die revision within the AS4C32M16S product line, reflecting a particular generation of internal silicon design while maintaining functional and pinout compatibility with related die revisions in the same footprint. The device communicates over a standard synchronous SDRAM command interface, using a clock-synchronized protocol for row and column addressing, data burst transfers, and bank management, and it supports the auto-refresh and self-refresh mechanisms typical of SDRAM devices to maintain stored data integrity without requiring constant external refresh management by the host controller. Mechanically, the device is housed in a thin small-outline package suited to space-constrained PCB layouts, and it is built for standard surface-mount assembly processes. The "-7TCN" suffix on this part number reflects a specific speed grade, package style, and temperature grade combination within the product family, with this particular variant intended for commercial temperature range operation. The device is supplied in tray packaging for surface-mount assembly and is compliant with RoHS material restrictions, supporting standard environmental and regulatory requirements for electronic components. Spec Sheet Identification Part Number: AS4C32M16SB-7TCN Device Family: AS4C32M16SB Manufacturer: Alliance Memory, Inc. Die Revision: B-die Functional Classification Device Type: Synchronous DRAM (SDR SDRAM) Memory Organization: Multi-bank array architecture Interface Type: Parallel, clock-synchronous command interface Refresh Capability: Supports auto-refresh and self-refresh modes Electrical Characteristics Supply Voltage: Standard 3.3V-class SDRAM supply rating Clock Frequency: Mid-range SDR SDRAM clock speed class Access Timing: Standard SDR SDRAM access time class for its speed grade Environmental & Qualification Temperature Grade: Commercial ("C" suffix designation) RoHS Compliance: Yes Product Positioning: Long-lifecycle, drop-in replacement memory device Package Package Type: Thin Small Outline Package, TSOP-II style Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tray packaging #AS4C32M16SB #AllianceMemory #SDRAM #SDRSDRAM #MemoryIC #EmbeddedMemory #TSOP #SurfaceMount #LegacyMemory #DropInReplacement #DRAM #EmbeddedSystems #IndustrialElectronics #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #MemoryComponent #PCBDesign #CommonPartsLibrary #IntegratedCircuit #Memory #AS4C32

CAP SAFETY 2.2nF ±20% 400V 250V TH The DCF222M34Y5UQ6BL7A0 is a multilayer ceramic capacitor manufactured for general-purpose electronic filtering, bypassing, and decoupling applications. This surface-mount passive component is designed to provide stable capacitance performance in compact electronic assemblies while supporting high-density PCB layouts and automated manufacturing processes. The capacitor utilizes ceramic dielectric technology to achieve low impedance and reliable high-frequency performance. It is commonly used in power supply filtering, signal coupling, noise suppression, RF circuits, embedded systems, industrial electronics, and consumer devices. Its compact footprint and stable electrical behavior make it suitable for modern digital and analog circuit designs requiring efficient decoupling and transient response characteristics. Engineering Specification Device Type Multilayer ceramic capacitor Capacitor Technology Ceramic dielectric multilayer structure Mounting Style Surface mount technology Electrical Characteristics Stable capacitance performance for filtering and bypass applications Dielectric Characteristics Designed for general-purpose signal and power conditioning applications Frequency Performance Low impedance behavior suitable for high-frequency operation Thermal Characteristics Stable operation across standard electronic operating temperatures Mechanical Characteristics Compact SMT package optimized for automated PCB assembly Reliability Features High insulation resistance and long operational lifetime Construction Monolithic multilayer ceramic structure Applications Power supply decoupling Signal filtering Noise suppression RF circuitry Embedded systems Industrial electronics Consumer devices Communication equipment Analog and digital circuit stabilization Manufacturer Commonly associated with Murata-style MLCC component series #commonpartslibrary #ceramiccapacitor #mlcc #passivecomponents #surfaceountcomponents #powerelectronics #signalfiltering #decouplingcapacitor #electronicsdesign #embeddedhardware #analogdesign #digitalelectronics #rfdesign #industrialelectronics

2 mOhms ±1% 3W Chip Resistor 2512 (6432 Metric) Current Sense, Moisture Resistant, Non-Inductive Metal Element The HoLLR2512-3W-2mR-1% is a low-resistance current sensing resistor designed for high-power applications requiring accurate current measurement and efficient power dissipation. Constructed in a robust metal element configuration, this resistor provides excellent thermal stability, low temperature coefficient, and high pulse handling capability. Its ultra-low resistance value minimizes power losses while enabling precise current monitoring in power management, battery systems, motor control circuits, industrial equipment, automotive electronics, and high-current DC-DC converter applications. Features Metal element current sense resistor technology Ultra-low resistance for minimal insertion loss High power dissipation capability Tight resistance tolerance for accurate current measurement Excellent long-term stability and reliability Low inductance construction High surge and pulse current handling capability Suitable for automated SMT assembly processes RoHS compliant construction Optimized for power management and protection circuits Electrical Characteristics Resistance value: 2 mΩ Resistance tolerance: ±1% Power rating: 3 W Package size: 2512 surface-mount package Low temperature coefficient of resistance High current carrying capability Low thermal EMF characteristics Applications Current sensing circuits Battery management systems Power supplies DC-DC converters Motor drive controllers Electric vehicle electronics Industrial automation equipment Overcurrent protection systems Energy storage systems High-current monitoring applications Mechanical Characteristics Surface-mount package Compact 2512 footprint Metal strip resistive element High thermal conductivity design Compatible with standard reflow soldering processes #commonpartslibrary #passivecomponents #resistor #currentsense #shuntresistor #powermanagement #powersupply #batterymanagement #motorcontrol #industrialelectronics #automotiveelectronics #highcurrent #smd #electronicsdesign #circuitprotection

The TTP223-BA6 is a single-channel capacitive touch sensor integrated circuit designed to replace traditional mechanical push buttons with a reliable touch-sensitive interface. The device utilizes capacitive sensing technology to detect human touch through conductive and non-conductive surfaces, enabling sleek and durable user interface designs. It features low power consumption, stable operation, high sensitivity, and simple implementation, making it suitable for consumer electronics, home appliances, industrial controls, smart devices, and embedded applications requiring touch-based input functionality. Engineering Specification Device Type Capacitive Touch Sensor Controller Sensing Method Capacitive Touch Detection Channel Configuration Single Touch Input Channel Output Configuration Digital Logic Output Operating Mode Momentary Touch Mode Toggle Touch Mode Sensitivity Control External Adjustment Capability Response Characteristics Fast Touch Detection Response Noise-Resistant Operation Stable Capacitive Sensing Performance Power Characteristics Low Power Consumption Optimized for Battery-Powered Applications Low Standby Current Operation Interface Compatibility Microcontrollers Embedded Processors Digital Logic Systems Human-Machine Interface Circuits Protection Characteristics High Immunity to Environmental Interference Reliable Touch Detection Performance Package Style SOP Surface-Mount Package Mounting Type Surface Mount Technology Applications Touch Buttons Consumer Electronics Home Appliances Smart Switches Control Panels Portable Devices IoT Products Industrial User Interfaces Lighting Controls Interactive Embedded Systems Features Single-Key Capacitive Touch Interface Mechanical Button Replacement Low Power Operation High Sensitivity Detection Adjustable Touch Parameters Compact Package Design Simple Circuit Integration Stable Environmental Performance Long Operational Life RoHS Compliant Construction Manufacturer TONTEK Design Technology #commonpartslibrary #integratedcircuit #touchsensor #capacitivetouch #humanmachineinterface #embeddedsystems #consumerelectronics #industrialelectronics #iot #controlpanel #smartdevices #sensorinterface #digitalinterface #lowpower #electroniccomponents

Power Management IC for iMX8M 5V 6A 6 Buck + 5 LDO The PCA9450CHNY is a highly integrated Power Management Integrated Circuit (PMIC) from NXP Semiconductors, specifically designed to power the i.MX 8M family of application processors, particularly the i.MX 8M Plus. It integrates multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, load switching, voltage monitoring, and system control functions into a single device. The PCA9450C variant features a configurable dual-phase 6 A buck regulator for powering high-current processor cores while supporting Dynamic Voltage Scaling (DVS) for optimized power efficiency. Key Features Six high-efficiency switching regulators (Buck converters) PCA9450C variant supports a configurable 6 A dual-phase buck regulator Three 3 A buck regulators with Dynamic Voltage Scaling (DVS) Remote-sense capability on major buck outputs for IR-drop compensation Five integrated LDO regulators Supports DDR4, LPDDR4, and DDR3L memory configurations 400 mA load switch with active discharge Dual-channel logic level translator Integrated 32.768 kHz crystal oscillator driver Fast-mode Plus (Fm+) 1 MHz I²C interface Programmable power sequencing and voltage control Power ON/OFF and Standby/Run mode control inputs Protection features including UVLO, thermal shutdown, fault monitoring, and soft-start Operating temperature range: −40°C to +105°C 56-pin HVQFN package (7 mm × 7 mm, 0.4 mm pitch) Optimized for i.MX 8M Mini, Nano, and Plus processors, especially the i.MX 8M Plus for the PCA9450C variant. #CommonPartsLibrary #PCA9450CHNY #PCA9450C #NXP #PMIC #PowerManagementIC #PowerSupply #VoltageRegulator #BuckConverter #LDO #DynamicVoltageScaling #DVS #IMX8M #IMX8MPlus #EmbeddedSystems #IndustrialElectronics #PowerManagement #HVQFN56 #Semiconductor #IntegratedCircuit #IC #CommonPartsLibrary #ElectronicsDesign #HardwareDesign #PCBDesign #EmbeddedLinux #IoT #ProcessorPowerManagement #PowerSequencing #SystemPower #NXPSemiconductors

Connector Header Surface Mount, Right Angle 8 position 0.039" (1.00mm) The SM08B-SRSS-TB is a compact, right-angle, surface-mount terminal block connector designed for secure wire-to-board connections in a wide range of electronic applications. It features a spring-clamp mechanism that ensures reliable electrical contact while allowing easy insertion and removal of solid or stranded wires without the need for screws. The terminal block is constructed from high-temperature, flame-retardant thermoplastic, providing robust mechanical stability and durability in harsh environments. Its low-profile design, consistent contact pressure, and compact footprint make it ideal for industrial control panels, automation systems, consumer electronics, power supplies, and signal distribution boards where secure and maintenance-free wire connections are required. Engineering Specifications Manufacturer: Sullins Connector Solutions / TE Connectivity Part Number: SM08B-SRSS-TB Connector Type: Terminal Block, Right Angle Mounting Style: Surface Mount Actuation Method: Spring-Clamp Wire Size Accommodation: Small Gauge Solid and Stranded Wires Contact Material: Tin-Plated Copper Alloy Housing Material: High-Temperature Thermoplastic, Flame Retardant Operating Voltage: Standard Low-Voltage Electronics Current Rating: Suitable for Signal and Low-Power Connections Pitch: Standard 5 mm / 0.2 inch (SM Series Typical) Poles: 8 Positions Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Industrial Controls, Automation Equipment, Signal Distribution, PCB Wiring, Consumer Electronics, Power Supplies, Embedded Systems Key Features Reliable spring-clamp wire retention Maintenance-free, no screws required Compact, low-profile design Durable thermoplastic housing Easy PCB mounting and soldering Suitable for solid and stranded wires #SM08B #SM08B_SRSS_TB #SpringClampConnector #TerminalBlock #SurfaceMount #RightAngleConnector #WireToBoard #PCBConnector #IndustrialElectronics #Automation #EmbeddedSystems #ElectronicComponents #SignalDistribution #LowPowerConnector #CompactConnector

The 24F 5A250V is a panel-mount cartridge fuse holder designed to securely accommodate and electrically connect cartridge fuses in power distribution and protection circuits. It provides a reliable interface between the fuse element and the electrical system, enabling easy fuse replacement while maintaining electrical safety and mechanical stability. Commonly used in industrial equipment, consumer electronics, power supplies, appliances, instrumentation, and control systems, the fuse holder supports circuit protection against overload and fault conditions while ensuring convenient maintenance and serviceability. Engineering Specification Device Type Panel-Mount Cartridge Fuse Holder Fuse Compatibility Cartridge Fuse Installation and Retention Current Rating Suitable for Low-Voltage Power Protection Applications Voltage Rating Compatible with AC Power Distribution Circuits Mounting Style Panel Mount Connection Method Solder Terminal or Wire Connection Interface Contact Material Conductive Metal Contacts with Corrosion Resistance Housing Material Insulating High-Temperature Polymer Construction Mechanical Characteristics Secure Fuse Retention Easy Fuse Replacement Stable Mechanical Assembly Durable Construction Safety Characteristics Electrical Isolation Support Reliable Contact Performance Overcurrent Protection Interface Safe Fuse Accessibility Environmental Characteristics Long Service Life Resistance to Mechanical Wear Suitable for Commercial and Industrial Environments Applications Power Supplies Industrial Control Equipment Consumer Electronics Electrical Appliances Instrumentation Systems Battery Chargers Test Equipment Automation Systems Distribution Panels Embedded Electronic Devices Features Compact Panel-Mount Design Reliable Electrical Contact Easy Maintenance Access High Mechanical Durability Secure Fuse Retention Mechanism Simple Installation Wide Application Compatibility RoHS Compliant Construction Component Category Fuse Holder #commonpartslibrary #passivecomponents #fuseholder #circuitprotection #overcurrentprotection #powerelectronics #powersupply #industrialelectronics #electricalsafety #panelmount #electroniccomponents #powermanagement #protectioncircuit #controlsystems #applianceelectronics

8 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole ## Engineering Specification ## General Description The **1726202** is a Phoenix Contact **MKKDSN series PCB terminal block** designed for compact and reliable wire-to-board connection in printed circuit board assemblies. It is intended for applications that require secure field wiring, serviceable conductor termination, and stable electrical connection between external wiring and PCB circuitry. The component is suitable for industrial control systems, automation equipment, power interfaces, instrumentation, building controls, and general electronic hardware assemblies. ## Device Identification Manufacturer Part Number: **1726202** Manufacturer: **Phoenix Contact** Product Name: **MKKDSN 1,5/ 8-5,08** Product Family: **MKKDSN 1,5** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed printed circuit board terminal block that allows external conductors to be connected directly to PCB circuits. The screw-clamp connection secures the conductor mechanically while maintaining electrical continuity through the terminal body and solder pins. This makes the component suitable for wiring interfaces that require durability, accessibility, and field-service capability. ## Mechanical Description The terminal block uses a compact green housing with a two-row terminal arrangement and side-access conductor entry. Its layout supports dense wiring connection on a printed circuit board while maintaining practical access for conductor insertion and screw tightening. The through-hole solder pins provide mechanical stability and electrical connection to the host PCB. ## Electrical Description The component is intended for low-voltage power and signal connection applications within the manufacturer’s specified current and voltage ratings. It supports conductor connection for typical industrial and control wiring requirements when used with compatible wire sizes, correct strip length, and proper tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements designed to transfer current from the inserted conductor to the PCB solder connection. The screw connection with tension sleeve helps maintain stable contact pressure and reliable conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1726202** is intended for through-hole PCB soldering, including wave-solder assembly processes. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidelines. The component should be positioned to allow safe conductor insertion, screwdriver access, and adequate clearance from nearby parts or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, relay boards, power supply interfaces, building automation equipment, instrumentation systems, sensor wiring interfaces, signal distribution boards, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current carrying requirement, voltage rating, creepage and clearance spacing, tightening torque, solder joint strength, wire routing, and user access during installation or maintenance. The terminal block should not be used beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkkdsn #mkkdsnterminalblock #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #wavesoldering #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering