I found this is a part-symbol/footprint project for Rockchip RK809-5, not an assembled schematic: it contains 69 terminal pins and no normal BOM components. I found Rockchip RK809 datasheet Rev 2.4 and will use it as the reference source for the part review.

Completed the RK809-5 part review and added the datasheet/metadata to the project properties. I created the full detailed report here: RK809-5 Part Review.

Key flags: the QFN-68-EP(7x7) footprint and 69-pad count match the datasheet, but pins 42/43 are named MIC1N/MIC1P while the datasheet table uses MICIN/MICIP, and most pins still have unspecified pin types/descriptions. The footprint uses a single large exposed-pad paste area; I’d recommend segmented paste and board-level thermal vias for robust assembly/thermal performance.

I’ll update every RK809-5 terminal with datasheet pin type, pin description, and section assignment, rename the microphone pins to the datasheet table names, then verify the terminal set afterward.

Done. I updated all 69 RK809-5 terminals with datasheet-based pin numbers, standard pin types, pin descriptions, and single logical section assignments.

I also renamed MIC1N → MICIN and MIC1P → MICIP to match the official datasheet pin table. Verification passed for terminal, terminal pin-number, and missing-property part review checks with no open warnings/errors.