• Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    A net identifier used to create connectivity to other Net Portal with the same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Power net portal is a special schematic object used to define a power or ground net. Power ports allow you to conveniently indicate a power net at any location in the design. Power nets of the same designator automatically connect throughout your design #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    14.2k
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k
tamaño de pistas recomendado
adrimc

adrimc

@copilot tamaño de pistas recomendado
11mo

copilot

Las recomendaciones para el tamaño de las pistas dependen de varios factores, entre ellos, la corriente que se espera que fluya por la pista, la tolerancia térmica de la pista, la densidad de los componentes y las restricciones del diseño general.
Aquí están algunas pautas generales que podrías seguir:

  • Para señales de baja potencia (menos de 100mA) se puede utilizar un tamaño de pista de alrededor de 8-10mil (0.2 - 0.25mm).

  • Para señales de mediana potencia (hasta 500mA), se puede considerar un tamaño de pista de 12-20 mil (0.3 - 0.5mm).

  • Para señales de alta potencia (hasta 2-3A), se podría llegar a necesitar pistas de 40-50 mil (1 - 1.25mm).

Por supuesto, estas son solo pautas y los detalles específicos de tu proyecto podrían requerir ajustes. Algunas veces los valores dependen de las restricciones del proceso de fabricación de la PCB, así que es buena idea consultar las capacidades del fabricante.
También se pueden usar calculadoras de ancho de pista disponibles en línea para determinar el ancho de pista necesario para una corriente dada, teniendo en cuenta factores como el espesor del cobre y la temperatura de subida deseada.
Ten en cuenta que para RF o altas velocidades, otros factores como la impedancia característica del trazado pueden ser más importantes que el ancho del trazado en sí.
Por último, es posible que quieras verificar tus elecciones de ancho de pista con las reglas de diseño de tu PCB en Flux para asegurarte de que no estás violando ninguna restricción mecánica o eléctrica. Por ejemplo, las reglas de comprobación de diseño (Design Rule Check, DRC) son importantes para validar la integridad de las pistas antes de enviar la producción.
11mo
Someone is typing...
C11
Capacitance
0.1u F
GPIO37
GPIO34
+5V
GPIO27
GPIO25
RST
C10
Capacitance
0.1u F
GPIO33
GPIO36
GPIO32
ESP_EN
GPIO38
GPIO26
GPIO39
BOOT
ESP_EN
GPIO14
ESP_IO0
GPIO35
+3V3
GPIO14
GND
GPIO34
GPIO36
+3V3
GPIO25
RST
GND
GPIO39
GPIO32
GPIO37
GPIO26
GPIO38
GPIO33
GPIO27
+5V
GPIO35

ESP32-MINI-1U Module

ESP32-MINI-1U Module
Description

Created
September 19th 2023
Last updated by vasy_skral
a year ago
1 Contributor(s)
vasy_skral

Controls

Properties

Availability & Pricing

DistributorQty 1
Digi-Key$1.06–$2.47
LCSC$1.38–$1.90
Mouser$2.42

Assets

    Thumbnail
  • thumbnail
    ESP32-MINI-1U Module-removebg-preview.png

    id=ESP32-MINI-1U Module-removebg-preview

Simulation

µs

Simulation Speed

Hey, I’m Copilot, your AI design assistant. I can help you brainstorm ideas, deb...

copilot

Hey, I’m Copilot, your AI design assistant. I can help you brainstorm ideas, debug problems, research components, and even make wiring connections for you. Ask me questions like:

  • @copilot I'm designing a PCB for a medical device that measures heart rate and temperature. Can you give me the list of components I will need?

  • @copilot How would I connect these parts to make the LED flash at 1kHz?

  • @copilot can you choose 4 digital pins on the ATMega328P-AU that I have here to use as GPIO given that I am already using some pins for reset, the external clock, UART, and I2C.

Chat with me by tagging @copilot on comments or in the chat.
1y
Someone is typing...
Checks that the power traveling across a given resistor is under its rating with 50% headroom.
Learn more
Checks that IC pins that require pull up or pull down resistors have them.
Learn more
Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.
Checks that all parts have a part number and are available from distributors.
Reports copper elements that are shorting.
Reports parts that have no footprint.
Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.
Designator
Ruleset
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
-
Override rule for ＊`REF`＊
-
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
-
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
-
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
-
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
＊`REF`＊
Override rule for ＊`REF`＊
-
Override rule for ＊`REF`＊
Designators
Net
GPIO19, IO19
Net 32
I34, GPIO34
Net 9
IO10, GPIO10
Net 34
TXD0, TX
Net 35
IO5, GPIO5
Net 27
GPIO32, IO32
Net 8
GPIO9, IO9
Net 13
GPIO4, IO4
Net 17
I36, GPIO36
Net 19
GPIO25, IO25
Net 22
GPIO13, IO13
Net 26
IO23, GPIO23
Net 28
GPIO26, IO26
Net 21
IO2, GPIO2
Net 7
K, +5V
Net 20
IO22, GPIO22
Net 6
GPIO0, IO0
Net 25
RXD0, RX
Net 37
GPIO33, IO33
Net 18
GPIO37, I37
Net 29
GPIO12, IO12
Net 24
I39, GPIO39
Net 36
I35, GPIO35
Net 40
I38, GPIO38
Net 33
EN, RST
Net 44
IO21, GPIO21
Net 11
P1, +3V3
Net 31
GPIO15, IO15
Net 4
IO27, GPIO27
Net 23
GPIO18, IO18
Net 12
IO14, GPIO14
Net 10
Reports nodes that are using rules that are not supported anymore.
Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.
Detect any via, trace or copper fill island that is not connected to any net.