IXYS Integrated Circuits brings OptoMOS® technology, reliability and compact size to a new family of high-power Solid State Relays. As part of this family, the CPC1709J single-pole normally open (1-Form-A) DC Solid State Power Relay employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The output, constructed with an efficient MOSFET switch and photovoltaic die, uses IXYS Integrated Circuits’ patented OptoMOS architecture while the input, a highly efficient infrared LED, provides the optically coupled control. The combination of low on-resistance and high load current handling capability makes this relay suitable for a variety of high performance DC switching applications. The unique ISOPLUS-264 package pioneered by IXYS enables Solid State Relays to achieve the highest load current and power ratings. This package features a unique IXYS process where the silicon chips are soft soldered onto the Direct Copper Bond (DCB) substrate instead of the traditional copper leadframe. The DCB ceramic, the same substrate used in high power modules, not only provides 2500Vrms isolation but also very low junction-to-case thermal impedance (0.3 °C/W). Features • 22.8ADC Load Current with 5°C/W Heat Sink • Low 0.05 On-Resistance • 60VP Blocking Voltage • 2500Vrms Input/Output Isolation • Low Thermal Impedance: JC = 0.3 °C/W • Isolated, Low Thermal Impedance Ceramic Pad for Heat Sink Applications • Low Drive Power Requirements • No EMI/RFI Generation Applications • Industrial Controls / Motor Control • Robotics • Medical Equipment—Patient/Equipment Isolation • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Transportation Equipment #CPC1709J #IXYS #Littelfuse #SolidStateRelay #SSR #OptoMOS #PowerRelay #DCRelay #MOSFETRelay #HighCurrentSwitching #ElectricalIsolation #IndustrialElectronics #PowerManagement #BatterySystems #AutomationControl

Connector Header Through Hole, Right Angle 2 position The AT13-2P-BM01 is a rugged 2-position right-angle PCB mount receptacle from Amphenol Sine Systems' AT Series BoardLock™ connector family. Designed for harsh-environment applications, it features gold-plated male contacts, a flange-mount design, and an IP67-rated sealed interface when mated. This connector is ideal for automotive, industrial, off-road, agricultural, marine, and heavy equipment applications where reliable board-to-cable connections are required. It supports through-hole solder mounting and is compatible with AT06-2S mating plugs. Key Features: 2-position right-angle PCB mount receptacle Through-hole solder termination BoardLock™ flange-mount design for secure PCB attachment Gold-plated copper alloy contacts for excellent conductivity and corrosion resistance Rated for 13 A current and 250 V voltage IP67 sealing (when mated) for dust and water resistance Operating temperature: -55°C to +125°C Durable thermoplastic housing with silicone rubber seals Designed for harsh automotive and industrial environments Compatible with AT06-2S AT Series plug connectors #CommonPartsLibrary #Connector #Amphenol #ATSeries #BoardLock #PCBConnector #RightAngleConnector #AutomotiveConnector #IndustrialConnector #IP67 #ThroughHole #FlangeMount #GoldPlated #HarshEnvironment #Electronics #BoardToCable

350mA 5500mcd Water Clear -40℃~+100℃ 450nm~460nm Blue 120° 2.8V~3.5V SMD3535-3P LED Indication - Discrete ROHS #CommonPartsLibrary #LED

Ultra-Low Noise Digital MEMS Microphone with PDM Output – High-performance omnidirectional MEMS microphone designed for voice assistants, smart speakers, conferencing systems, industrial voice interfaces, IoT devices, wearables, automotive applications, and embedded audio systems. Part of the Infineon XENSIV™ microphone family, it features a digital PDM output, 73 dB(A) signal-to-noise ratio (SNR), −26 dBFS sensitivity (±1 dB @ 94 dB SPL), and an acoustic overload point (AOP) of 122 dB SPL, delivering excellent speech intelligibility and high dynamic range. Operates from a 1.62 V to 3.6 V supply with 980 µA typical current consumption, supports a 20 Hz to 19 kHz frequency response, and includes multiple operating modes for power optimization. Features a bottom-port acoustic design, IP57 dust and water resistance, and AEC-Q103 qualification (on demand) for demanding environments. Housed in a compact 5-pad LLGA package (4.0 × 3.0 × 1.2 mm) and specified for operation over a −40°C to +85°C temperature range. #Infineon #IM73D122V01XTMA1 #XENSIV #MEMSMicrophone #DigitalMicrophone #PDM #VoiceInterface #SmartSpeaker #IoT #AudioProcessing #AECQ103 #EmbeddedSystems

-40℃~+85℃ 120° 3.2V 527nm 5mA 685mcd 80mW Discrete Diode Emerald Green Water Clear 0603 LED Indication - Discrete ROHS The BZ-C0603-G3-F1 is a surface-mount (SMD) 0603 chip LED designed to emit emerald green light (~527 nm). It is optimized for low-power indicator applications and backlighting, offering high brightness in a very small package size suitable for modern compact PCB designs. ⭐ Key Features 📦 Package: 0603 (1.6 × 0.8 mm SMT LED) 💡 Color: Emerald Green / Green LED (~527 nm wavelength) 🔆 Luminous intensity: up to ~685 mcd (typical high-brightness grade) ⚡ Forward voltage: ~2.6 V to 3.2 V (typical at 5 mA) 🔌 Forward current: ~5 mA (typical operating current) 📐 Viewing angle: ~120° wide viewing angle 🔥 Power rating: ~80 mW maximum 🌡️ Operating temperature: −40°C to +85°C 🧲 ESD protection: up to ~2000 V (HBM) ♻️ RoHS compliant, suitable for automated SMT assembly #CommonPartsLibrary #LED