4-Position Through-Hole Male Pin Header – Single-row vertical PCB header designed for board-to-board interconnects, wire-to-board connections, industrial control systems, embedded electronics, instrumentation, prototyping, and general-purpose electronic applications. The Samtec TSW-104-07-G-S is part of the TSW Series, featuring 4 male pins on a 2.54 mm (0.100") pitch with a through-hole vertical mounting configuration. It utilizes square phosphor bronze contacts with 10 µin (0.25 µm) gold plating on the mating surface and gold-plated posts for excellent conductivity, corrosion resistance, and long-term reliability. The connector features a 0.230 in (5.84 mm) mating pin length, 0.100 in (2.54 mm) post length, push-pull mating, and a black UL94 V-0 PBT insulator. Rated for up to 5.7 A per contact (application dependent) and suitable for operation over a −55°C to +125°C temperature range, it is ideal for rugged industrial and embedded system designs. #Samtec #TSW10407GS #TSWSeries #MaleHeader #PinHeader #ThroughHoleConnector #BoardToBoard #254mmPitch #IndustrialElectronics #EmbeddedSystems #PCBConnector

20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSW-120-01-T-S is a single-row, 20-position female (receptacle) socket strip with a 2.54 mm (0.1") pitch, intended for through-hole PCB mounting. It uses Samtec’s Tiger Buy™ contact system, providing reliable electrical performance and durability for repeated mating cycles. It is commonly used in embedded systems, development boards, and general PCB interconnections, especially where standard 0.1" headers are required. Female header 1x20 2.54mm Key Features Standard 2.54 mm Pitch Industry-standard spacing compatible with most pin headers and prototyping systems 20 Positions, Single Row Ideal for compact signal connections and header interfaces Tiger Buy™ Contact System Provides low insertion force and reliable electrical contact Available in standard or low insertion force variants Through-Hole Mounting Ensures strong mechanical retention and durability on PCBs Tin-Plated Contacts (T option) Cost-effective plating suitable for general-purpose applications High-Speed Capability Supports signals up to ~8 Gbps, depending on application and layout Wide Operating Temperature Range Typically −55 °C to +105 °C, suitable for industrial environments Material Construction Contacts: Phosphor bronze Insulator: High-temperature plastic (e.g., LCP) Versatile Mating Compatibility Mates with common Samtec header series (TSW, MTSW, etc.) and standard 0.025" square posts #CommonPartsLibrary #Connector #SSW-120

6-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for industrial controls, consumer electronics, appliances, power supplies, embedded systems, instrumentation, and general-purpose wire-to-board interconnect applications. The TE Connectivity 640456-6 is part of the MTA-100 Series, featuring 6 positions on a 2.54 mm (0.100") pitch with a through-hole vertical PCB mount. It utilizes square copper alloy contacts with tin plating, a single-wall polarized shroud, and a friction-lock mating system to ensure secure cable retention and proper orientation during assembly. Rated for 250 VAC (current rating depends on the mating wire gauge), it is constructed with a UL94 V-0 thermoplastic housing for durability and flame resistance. The connector operates over a −55°C to +105°C temperature range and is ideal for reliable board-to-wire connections in embedded and industrial electronic designs. #TEConnectivity #6404566 #MTA100 #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #254mmPitch #IndustrialElectronics #EmbeddedSystems #BoardToWire #Connector

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) Pin header connector for board-to-board interconnection, featuring a 3-position, single-row, right-angle through-hole configuration with a 2.54 mm pitch. It is rated for 250 V and 3 A, uses gold-plated contacts, and is specified for an operating temperature range of −40 °C to +105 °C. #PinHeader #BoardToBoard #Connector #ThroughHole #RightAngle #2.54mmPitch #3Pin #250V #3A #WurthElektronik #WRPHD

3-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for consumer electronics, industrial controls, embedded systems, home appliances, IoT devices, instrumentation, and general-purpose wire-to-board interconnect applications. The JST B3B-PH-K-S is part of the PH Series, featuring 3 positions on a 2.00 mm (0.079") pitch with a through-hole vertical PCB mount. It utilizes brass square pins with tin plating, a 4-wall polarized shroud, and a detent locking mechanism for secure mating with compatible PH series crimp housings. Rated for 2 A and 100 V, it is constructed with a UL94 V-0 rated PA66 (Nylon 6/6) housing, providing reliable electrical and mechanical performance. The connector supports press-fit and solder termination, operates over a −25°C to +85°C temperature range, and is ideal for compact embedded and industrial board-to-wire applications. #JST #B3BPHKS #PHSeries #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #2mmPitch #BoardToCable #IndustrialElectronics #EmbeddedSystems #Connector

Connector Header Through Hole 18 position 0.100" (2.54mm) # TSW-118-07-G-S ## General Description The TSW-118-07-G-S is a through-hole board-to-board and wire-to-board interconnect header manufactured by Samtec. It belongs to the TSW series of standard terminal strip headers designed for reliable signal transmission in electronic assemblies, embedded systems, industrial controls, telecommunications equipment, instrumentation, and general-purpose printed circuit board applications. The component features precision-machined contacts, robust mechanical construction, and compatibility with a wide range of mating connectors. Its design supports secure electrical connections while maintaining excellent durability during repeated mating cycles and long-term operation in demanding environments. ## Key Features ### Mechanical Characteristics * Through-hole mounting configuration * Single-row terminal strip header design * Straight vertical orientation * Precision-machined contact system * High-reliability board-level interconnection ### Contact System * Gold-plated contact surface * Enhanced conductivity and signal integrity * Corrosion-resistant contact finish * Suitable for repeated insertion and removal cycles ### Electrical Characteristics * Low contact resistance * Reliable signal transmission * Suitable for low-power and signal-level applications * Stable electrical performance across operating conditions ### Material Construction * High-temperature thermoplastic insulator * Durable metallic contact structure * RoHS-compliant materials * Lead-free manufacturing compatibility ### Environmental Characteristics * Industrial-grade operating capability * Resistant to mechanical wear during mating cycles * Suitable for automated and manual assembly processes ### Application Areas * Embedded Systems * Microcontroller Development Boards * Industrial Automation Equipment * Telecommunications Hardware * Test and Measurement Instruments * Medical Electronics * Data Acquisition Systems * Prototyping Platforms * Consumer Electronic Devices * PCB Interconnection Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industry-standard connector footprint ## Manufacturer Samtec Inc. ## Product Family TSW Series Terminal Strip Headers #Samtec #TSW11807GS #TerminalStripHeader #PCBConnector #BoardToBoardConnector #WireToBoardConnector #ElectronicsComponents #EmbeddedSystems #IndustrialElectronics #InterconnectSolutions #ThroughHoleConnector #ElectronicDesign #HardwareEngineering #PCBAssembly #CommonPartsLibrary #Connector #Header #TSW pin header 1x18 2.54mm

Archer: 2 Pos Plug SIL Straight SMT Connector 3mm pin (T+R) Connector Header Surface Mount 2 position 0.050" (1.27mm) The M50-3630242R is a compact 2-position surface-mount male header connector from the Archer M50 series by Harwin. It is designed for high-reliability board-to-board interconnection applications where space saving, durability, and reliable signal transmission are important. The connector features a 1.27 mm pitch, gold-plated contacts, and SMT mounting, making it suitable for compact embedded, industrial, communication, medical, and automotive electronics. Key Features 2-position male header connector 1.27 mm (0.05") pitch compact design Surface-mount (SMT) mounting style Board-to-board connection configuration Gold-plated mating contacts for improved conductivity and corrosion resistance Tin-plated SMT terminations 1 A current rating per contact Operating temperature: -40°C to +105°C Unshrouded single-row vertical header Pick-and-place compatible for automated assembly Polyamide (Nylon 9T) UL94 V-0 housing Brass contact material Compatible with multiple mating stack heights in the Archer M50 series #CommonPartsLibrary #Connector

Connector Header Through Hole 6 position 0.100" Pin Header 1x06 2.54mm PinHeader 1x6 2.54mm The TSW-106-07-G-S is a through-hole vertical header designed for board-to-board and board-to-wire interconnection in electronic systems. It is part of a precision connector series known for high reliability, consistent mechanical alignment, and excellent electrical performance. The component is commonly used in applications requiring modular connectivity, prototyping flexibility, and secure signal routing between printed circuit boards or peripheral interfaces. Its design supports repeated mating cycles while maintaining stable contact integrity, making it suitable for both development and production environments. Functional Description This component functions as a single-row header that provides a direct electrical interface between a printed circuit board and a mating connector or cable assembly. It enables straightforward signal or power routing through plated pins that are soldered into the PCB. The vertical orientation allows perpendicular mating, supporting compact and efficient board layouts. The connector is designed to ensure proper alignment and retention during mating, reducing the risk of intermittent connections. Electrical Characteristics The header supports low-voltage signal transmission and moderate current levels typical of board-level interconnects. It offers low contact resistance to maintain signal integrity and efficient current flow. The contact system is designed to provide consistent electrical performance across repeated insertions, ensuring reliability in both signal and power applications. Mechanical Characteristics The component features a robust insulating housing that maintains pin alignment and structural integrity during handling and operation. The contact pins are fabricated from conductive material and plated to enhance durability, conductivity, and مقاومت to corrosion. The through-hole mounting style provides strong mechanical anchoring to the printed circuit board, improving resistance to mechanical stress and vibration. The design supports reliable mating with compatible connectors and ensures long service life. Environmental Characteristics The TSW-106-07-G-S is constructed using materials that provide stable performance under typical environmental conditions encountered in electronic assemblies. It is designed to withstand standard temperature ranges and environmental stresses such as humidity and mechanical handling, maintaining electrical and mechanical reliability over time. Applications This header is widely used in embedded systems, industrial electronics, development platforms, communication equipment, and general-purpose PCB interconnect applications. It is especially suited for designs requiring modular connectivity, easy assembly, and dependable signal transfer. Summary The TSW-106-07-G-S from Samtec is a reliable through-hole header solution that combines mechanical durability with stable electrical performance. Its straightforward design, compatibility with standard interconnect systems, and suitability for a wide range of applications make it a common choice for board-level connectivity in modern electronic designs. #CommonPartsLibrary #Connector #Header #TSW

JST PH Connector Header Through Hole, Right Angle 4 position 0.079" (2.00mm) The S4B-PH-K-S(LF)(SN) is a 4-position, single-row, right-angle (side-entry) male header designed for 2.0 mm pitch wire-to-board connections. It is a through-hole mounted, shrouded connector that ensures reliable and secure mating with compatible PH series housings and crimp terminals. This connector is commonly used in consumer electronics, embedded systems, power supplies, and industrial control boards, especially where space-saving and dependable connections are required. Key Features Connector Type: Shrouded male header (wire-to-board) Number of Positions: 4 pins (single row) Pitch: 2.0 mm Orientation: Right-angle (side entry) Mounting Type: Through-hole (THT) Termination: Solder Electrical Characteristics Rated Voltage: 100 V Rated Current: 2 A per contact Insulation Resistance: ≥1000 MΩ Contact Resistance: Low (typically ≤10–20 mΩ) Mechanical & Material Contact Material: Brass / phosphor bronze with tin plating Housing Material: PA66 (Nylon), UL94 V-0 flame rated Locking Mechanism: Detent lock for secure mating Shrouded Design: Prevents misalignment and protects pins Environmental Operating Temperature: −25 °C to +85 °C #CommonPartsLibrary #Connector #Header #JSTPH #MalePins #RightAngle #4pos

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole The 1730405 is a PCB terminal block from Phoenix Contact, belonging to the MKDS 2,5 series. It is designed for secure screw-type wire-to-board connections, commonly used in industrial control systems, power distribution, and PCB interface applications. This component provides a reliable mechanical and electrical connection between wires and printed circuit boards (PCB) with a standard 5.08 mm pitch. Key Features 3-position PCB terminal block Compact single-row configuration for signal or power connections Screw connection technology Secure and vibration-resistant wire termination Standard 5.08 mm pitch Compatible with common industrial PCB layouts Rated electrical performance Nominal voltage up to 400 V Nominal current up to 24 A (with proper conductor size) Wire compatibility Solid and stranded wires: 0.14 mm² to 2.5 mm² AWG range: approximately 30–12 AWG High insulation rating Insulating material: PA (Polyamide) Flame class: UL 94 V-0 High surge voltage capability Up to 4 kV surge rating Through-hole PCB mounting Designed for soldering into PCB for stable mechanical retention Industrial-grade durability Suitable for harsh environments and long-term use Typical Applications Industrial automation systems Power supply and distribution boards Control panels Embedded PCB wiring interfaces Electrical instrumentation systems 1x3 terminal block #CommonPartsLibrary #Connector #Terminal block

Connector Header Through Hole 5 position 0.100" (2.54mm) SWD header 1x5 2.54mm PinHeader 1x05 2.54mm horizontal The TSW-105-07-G-S is a high-reliability, through-hole, single-row pin header from Samtec’s TSW series. It is designed for board-to-board or wire-to-board interconnections in a wide range of electronic applications. Featuring a standard 2.54 mm pitch and gold-plated contacts, this connector ensures reliable electrical performance, durability, and compatibility with industry-standard mating components. Mechanical Characteristics Connector Type: Pin Header Mounting Type: Through-Hole Number of Positions: 5 Number of Rows: Single Row Pitch: 2.54 mm Orientation: Vertical Termination Style: Solder Contact Shape: Square Post Material and Plating Contact Material: Phosphor Bronze Contact Plating: Gold over Nickel Housing Material: Black Thermoplastic (UL94 V-0 rated) Electrical Characteristics Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for reliable signal transmission Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -55°C to +125°C Flammability Rating: UL94 V-0 Applications Board-to-board connections Wire-to-board interfaces Prototyping and development systems Industrial and consumer electronics Compliance and Standards RoHS Compliant Lead-Free #CommonPartsLibrary #Connector #Header #TSW

Connector Header Through Hole 6 position 0.100" (2.54mm) The TSW-106-06-T-S is a through-hole, single-row, 6-position header from Samtec’s TSW series, designed for board-to-board or wire-to-board interconnections. It features a standard 2.54 mm (0.100") pitch and utilizes square posts for reliable mating with female sockets or IDC connectors. This header is commonly used in prototyping, development boards, and general-purpose PCB designs requiring robust and cost-effective interconnect solutions. Key Features Single-row vertical header 6 positions (1x6 configuration) Standard 2.54 mm pitch spacing Through-hole mounting for strong mechanical retention Tin-plated contacts for cost efficiency Square post design for reliable electrical contact Compatible with a wide range of mating connectors Electrical Characteristics Current Rating: ~3 A per contact (typical, depending on application) Contact Resistance: ≤ 10 mΩ (initial) Insulation Resistance: ≥ 1000 MΩ Withstanding Voltage: ~500 VAC Mechanical Characteristics Number of Positions: 6 Rows: 1 Pitch: 2.54 mm (0.100") Mounting Type: Through-hole Contact Type: Male pin (square post) Post Length Style: Standard (06) Tail Length: ~3.18 mm (0.125") typical Mating Pin Size: ~0.64 mm square Material and Plating Contact Material: Phosphor Bronze Plating: Tin over Nickel Insulator Material: Glass-filled thermoplastic (UL94 V-0 rated) Environmental Specifications Operating Temperature Range: -55°C to +105°C RoHS Compliant: Yes Lead-Free: Yes Applications PCB prototyping and development boards Embedded systems and microcontroller headers Board-to-board connections General-purpose signal connections Packaging Typically supplied in bulk or tube packaging depending on order quantity #commonpartslibrary #connector #header

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole USB Type-C Receptacle Connector for USB 2.0 data transfer and power delivery in board-mounted applications. It features a 16-position, single-row SMT right-angle receptacle with a 1.2 mm shell DIP length, supports up to 5 A rated current and 20 V AC rms rated voltage, and is designed for on-board mounting without a rear shield. #USBTypeC #USB2_0 #Receptacle #Connector #SMT #RightAngle #16Position #BoardMount #5A #JAEElectronics #DX07Series

Connector Header Through Hole 12 position 0.100" (2.54mm) pin header 1x12 2.54mm The TSW-112-07-G-S is a single-row, 12-position, 2.54 mm pitch through-hole male pin header from Samtec’s TSW series. It is designed for reliable board-to-board or wire-to-board connections in prototyping and production environments. Featuring gold-plated phosphor bronze contacts and a durable PBT housing, this connector ensures excellent electrical performance, corrosion resistance, and mechanical durability. It is commonly used in embedded systems, development boards, and general-purpose PCB interconnections. Product Type Pin Header / Pin Strip Number of Positions 12 Number of Rows 1 Pitch 2.54 mm (0.1 in) Mounting Style Through Hole Mounting Angle Straight Termination Style Solder Pin Contact Type Male Pin Contact Material Phosphor Bronze Contact Plating Gold Housing Material Polybutylene Terephthalate (PBT) Housing Color Black Flammability Rating UL 94 V-0 Current Rating 4.3 A to 6.3 A (application dependent) Voltage Rating Up to 550 VAC Packaging Bulk Country of Origin Vietnam RoHS Compliance Compliant #commonpartslibrary #connector #header

12 Position Receptacle Connector 0.100" (2.54mm) Through Hole Gold Female header connector designed for board-to-board or wire-to-board interconnection using a 2.54 mm (0.100") pitch through-hole interface. The SSW-112-01-G-S is a single-row, 12-position socket strip with gold-plated contacts, rated for 2.9 A per contact and 550 VAC RMS operating voltage, and supports an operating temperature range of -55°C to +125°C. #Connector #Header #FemaleHeader #ThroughHole #Samtec

20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSQ-110-03-T-D is a through-hole dual-row socket strip receptacle connector manufactured by Samtec, designed for board-to-board and pin header mating applications using the industry-standard pitch spacing that has been dominant in through-hole PCB interconnect design for decades. It belongs to Samtec's SSQ series, a family of square-post socket strip connectors that accept standard square-pin headers and are widely used across prototyping, instrumentation, test and measurement, embedded systems, industrial control, and general-purpose PCB stacking applications. As a socket strip of the receptacle gender, the SSQ-110-03-T-D is intended to receive a mating male pin header, creating a reliable and separable board-to-board or wire-to-board connection. The dual-row configuration provides a higher contact density within a given board length than a single-row socket, which is why dual-row socket strips in this pitch class are extensively used in applications such as microcontroller and single-board computer expansion connectors, module-to-baseboard interfaces, and other designs where a significant number of signal, power, or ground connections must be made across a single separable connector interface. The connector features square solder tails for through-hole PCB mounting, with the "-T" suffix in the part number designating the square post tail style, which provides a well-defined mechanical footprint and reliable solder joint formation in wave solder and hand-solder assembly processes. The "-D" suffix indicates the dual-row configuration. Contact material is phosphor bronze, a widely used spring-contact alloy chosen for its combination of good electrical conductivity, excellent spring properties that maintain consistent contact force across many mating cycles, and resistance to stress relaxation over time. The contacts are finished with matte tin plating over nickel underplate, providing a solderable, cost-effective contact surface suitable for the majority of general-purpose signal and low-power applications for which this connector class is typically used. The insulator body is molded from black liquid crystal polymer, a high-performance engineering thermoplastic that offers the high dimensional stability, excellent electrical insulation properties, and high-temperature resistance needed to withstand wave soldering and reflow-adjacent thermal exposure during PCB assembly. The material also carries a UL94 V-0 flammability rating, reflecting its self-extinguishing behavior in the event of an ignition source, which is required or preferred in many end-product regulatory compliance frameworks. The SSQ series is widely used in conjunction with Samtec's TSW series male pin headers as a complementary mating pair, and the connector is compatible with a broad range of standard square-pin headers from other manufacturers that conform to the same pitch and pin geometry, making it a versatile choice for general-purpose through-hole header applications. Spec Sheet Identification Part Number: SSQ-110-03-T-D Series: SSQ Manufacturer: Samtec, Inc. Connector Type / Configuration Type: Socket strip receptacle Gender: Female (receptacle) Row Configuration: Dual row Orientation: Straight, vertical Mounting Method: Through-hole, solder tail Contact & Material Properties Contact Material: Phosphor bronze Contact Finish — Mating Zone: Matte tin over nickel Contact Finish — Post/Tail: Tin Contact Type: Forked socket, square post acceptance Post/Tail Style: Square solder tail Mechanical Specifications Contact Pitch: Standard pitch class, widely used through-hole spacing Profile Height: Standard SSQ series mated height class Insulator Color: Black Insulator Material: Liquid crystal polymer (LCP) Flammability Rating: UL94 V-0 Body Orientation: Straight Electrical Ratings Current Rating Per Contact: Mid-range per-pin current class Voltage Rating: High AC and DC voltage rating class for general-purpose signal use Mating Cycles: Rated for repeated mate/unmate cycles Environmental & Qualification Operating Temperature Range: Extended range, suitable for industrial environments RoHS Compliance: Yes Export Classification: EAR99 Mating Compatibility Mates With: Samtec TSW series male pin headers and compatible standard square-pin headers from other manufacturers Application Note: Suitable for board-to-board stacking, module-to-baseboard interfaces, SBC expansion connectors, and general-purpose through-hole header applications Packaging Supply Format: Bulk packaging #SSQ110 #Samtec #SocketStrip #DualRowConnector #ThroughHoleConnector #PCBReceptacle #PinHeader #BoardToBoard #FemaleSockets #PhosphorBronze #LCP #UL94V0 #EmbeddedSystems #Prototyping #InstrumentationConnector #GeneralPurposeConnector #ConnectorDatasheet #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #PCBDesign #CommonPartsLibrary #Connector #Header #Receptacle #Female-Socket #SSQ

Single-Row Female Socket Header – 22-position single-row female socket header for board-to-board and wire-to-board interconnection. Features a 2.54 mm (0.100") pitch, through-hole PCB mounting, solder termination, 3 A current rating per contact, and 250 V voltage rating. Constructed with gold flash-plated phosphor bronze contacts for enhanced corrosion resistance and a black UL94 V-0 polyester insulator. Supports push-pull mating, provides a 3.20 mm post length and 8.51 mm insulation height, and is specified for operation over a −40°C to +105°C temperature range. #SullinsConnectorSolutions #PPPC221LFBNRC #FemaleHeader #FemaleSocket #BoardToBoard #ThroughHole #22Position #2_54mmPitch #GoldPlatedContacts #PCBConnector #Interconnect #EmbeddedSystems