SSW-112 Footprint Audit

flux

I’ll check the footprint dimensions and Samtec drawing, correct the scale and plated holes, then verify all 12 pads.
Thought for 12 mins 44 sec
Thought for 8 sec
Created 2 tasks.
1/2 Correct footprint scale and define Samtec plated through-holes.

Correct footprint scale and define Samtec plated through-holes.

Verify pad geometry and report the source part defect.

Thought for 16 sec
Awaiting 1 task
"SSW-112 Footprint Audit" completed.
Thought for 2 mins 31 sec
Thought for 6 sec
Managing 1 task
Thought for 9 sec
2/2 Verify pad geometry and report the source part defect.

Correct footprint scale and define Samtec plated through-holes.

Verify pad geometry and report the source part defect.

Thought for 7 sec
Referenced guidance.
Thought for 10 sec
Awaiting 1 task
"Footprint Verification" completed.

flux

Fixed all 12 pads to use centered Ø1.04 mm plated through-holes, and verified 1.95 mm copper, 2.54 mm pitch, and 27.94 mm span. The footprint was already correctly scaled—the flagged values were in meters, not millimeters.
Details are in the footprint audit; drill exports remain unverified, and I filed an internal ticket for Flux to review the underlying asset’s drill discrepancy.
Sign up to send

Files

Pins

Symbol

Layout

3D View

1
Pin Number
1
4
Pin Number
4
2
Pin Number
2
3
Pin Number
3
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Symbol Style
1
1
Passive
Left
2
2
Passive
Left
3
3
Passive
Left
4
4
Passive
Left
5
5
Passive
Left
6
6
Passive
Left
7
7
Passive
Left
8
8
Passive
Left
9
9
Passive
Left
10
10
Passive
Left
11
11
Passive
Left
12
12
Passive
Left

SSW-112-01-G-S