Molex SL series right-angle PCB header with latch and split pegs, 2.54mm (0.100") pitch wire-to-board connector, available in 2 to 25 circuit positions, through-hole mounting, 0.64mm square pins, glass-filled polyester UL94V-0 housing, phosphor bronze terminals, positive locking latch for secure cable retention, designed for reliable signal and power connections in industrial, consumer, automotive and embedded electronic applications. Molex 70551-0003 Molex SL header, Molex SL series connector, Molex 70400, Molex 70430, right angle header with latch, split peg header, 2.54mm wire to board connector, 0.100 inch header, Molex SL right angle header, locking PCB header, through hole connector, phosphor bronze header, Molex wire to board system Hashtags: #MolexSL #MolexConnector #SLSeries #WireToBoardConnector #RightAngleHeader #LockingHeader #SplitPegHeader #254mmPitch #100MilConnector #ThroughHoleConnector #PCBHeader #PhosphorBronzeContacts #IndustrialConnector #EmbeddedHardware #Molex70400 #Molex704302.54mm Pitch SL Header, Single Row, Right Angle, 3.05mm Pocket, Shrouded, with Beveled Plastic Peg, 4 Circuits, Tin (Sn) Plating

4 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole 691137710004 is a 4-position wire-to-board terminal block from the WR-TBL Series 1377 by Würth Elektronik. It features a horizontal side-entry design with a 5.00 mm pitch and through-hole PCB mounting, making it suitable for industrial controls, power distribution, automation equipment, and general-purpose PCB wire connections. The pressure-clamp screw terminal design provides secure wire retention and reliable electrical performance. Key Features 4-position wire-to-board terminal block 5.00 mm pitch spacing Horizontal (side-entry) wire connection Through-hole PCB mounting Pressure-clamp screw termination with wire guard Supports 12–30 AWG wire sizes Rated for up to 16 A current Rated for up to 300 V Operating temperature range: -30°C to +120°C Polycarbonate (PC) housing for durability Copper alloy contacts with nickel plating M2.5 screw thread with 0.4 Nm recommended tightening torque Green housing color for standard industrial identification #TerminalBlock #WireToBoard #WurthElektronik #PCBConnector #ScrewTerminal #IndustrialConnector #ThroughHole #WRTBL #PowerConnection #ElectronicsDesign #commonpartslibrary #connector #terminalblock

M8 Circular Connector – 4-position female panel-mount circular connector for industrial signal interconnection. Features through-hole solder termination, straight orientation, threaded coupling, shielded metal shell, IP67 ingress protection, 3 A current rating, 30 VAC operating voltage, and gold-plated socket contacts. Includes a copper alloy shell with nickel plating, board lock, keyed polarization (A-code), and operates over a −40°C to +85°C temperature range. Designed for panel and PCB mounting in automation, industrial, and telecommunications applications. #TEConnectivity #AMP #T4041037041000 #M8Connector #CircularConnector #PanelMount #4Position #FemaleConnector #ShieldedConnector #IP67 #ThroughHole #IndustrialConnector #EmbeddedSystems

Connector Header Panel Mount, Through Hole, Right Angle 2 position 0.215" (5.46mm) Deutsch DT 2-position connector DT13-2 style DT13-2P is a 2-position, right-angle wire-to-board PCB header from the DEUTSCH DT Series by TE Connectivity. It is designed for rugged automotive, industrial, heavy equipment, and off-road applications where reliable power and signal connections are required. The connector features a sealed interface, through-hole solder termination, and a durable housing that withstands harsh environments, including vibration, moisture, and extreme temperatures. Key Features: 2-position right-angle PCB header DEUTSCH DT sealed connector system Through-hole solder termination 5.46 mm (0.215 in) pitch Rated up to 13 A contact current Maximum operating voltage of 250 VAC/VDC Operating temperature range: -55°C to +125°C Nickel-plated contacts for corrosion resistance Suitable for both power and signal applications Rugged design for automotive and industrial environments #CommonPartsLibrary #Connector #DT13-2P #TEConnectivity #DeutschDT #PCBHeader #WireToBoard #SealedConnector #AutomotiveConnector #IndustrialConnector #ThroughHole #RightAngleConnector #PowerConnector #SignalConnector

Connector Header Through Hole, Right Angle 2 position The AT13-2P-BM01 is a rugged 2-position right-angle PCB mount receptacle from Amphenol Sine Systems' AT Series BoardLock™ connector family. Designed for harsh-environment applications, it features gold-plated male contacts, a flange-mount design, and an IP67-rated sealed interface when mated. This connector is ideal for automotive, industrial, off-road, agricultural, marine, and heavy equipment applications where reliable board-to-cable connections are required. It supports through-hole solder mounting and is compatible with AT06-2S mating plugs. Key Features: 2-position right-angle PCB mount receptacle Through-hole solder termination BoardLock™ flange-mount design for secure PCB attachment Gold-plated copper alloy contacts for excellent conductivity and corrosion resistance Rated for 13 A current and 250 V voltage IP67 sealing (when mated) for dust and water resistance Operating temperature: -55°C to +125°C Durable thermoplastic housing with silicone rubber seals Designed for harsh automotive and industrial environments Compatible with AT06-2S AT Series plug connectors #CommonPartsLibrary #Connector #Amphenol #ATSeries #BoardLock #PCBConnector #RightAngleConnector #AutomotiveConnector #IndustrialConnector #IP67 #ThroughHole #FlangeMount #GoldPlated #HarshEnvironment #Electronics #BoardToCable

Board Mount Header, Right Angle, AT, 3 Pin, Snap Fit, Tin plate ATF13-3P-BM03 is a 3-position right-angle board-mount connector from the Amphenol AT Series, designed for rugged automotive, industrial, and off-road applications. It features a PCB-mounted male header with BoardLock™ snap-fit retention, providing a secure connection and reliable performance in harsh environments. When mated with a compatible AT Series plug, the connector achieves an IP67 environmental sealing rating, making it suitable for dust- and water-resistant applications. Key Features 3-position right-angle PCB-mount male header BoardLock™ snap-fit retention for secure PCB installation IP67-rated sealing when mated with compatible connector Rated current: 13 A Rated voltage: 250 VDC Operating temperature range: −55°C to +125°C #16 contact system with copper-alloy contacts Tin-plated contacts with nickel underplate Thermoplastic housing for durability Suitable for automotive, industrial, and harsh-environment applications Through-hole solder termination 4.30 mm contact pitch #CommonPartsLibrary #Connector #Amphenol #ATSeries #BoardMountConnector #AutomotiveConnector #IndustrialConnector #IP67 #RightAngleConnector #PCBConnector #BoardLock #HarshEnvironment #Interconnects

5 Position Barrier Strip, Dual Barrier, Printed Circuit Pin Bottom Termination, Wire-to-Board, 8.26 mm [.325 in] Centerline, Buchanan 4DB Series Connectivity 4DB-P108-05 PCB terminal block, through-hole screw terminal connector, 0.325in (8.26mm) pitch, 12–22AWG wire range, captive nickel-plated brass screw, matte tin plated terminals, up to 20A current rating and 300V voltage rating (depending on variant), suitable for power distribution, industrial control, instrumentation, and field wiring connections. Search Keywords: 4DB-P108 terminal block, barrier terminal block, screw terminal block, PCB terminal block, through hole terminal block, captive screw connector, 8.26mm pitch terminal block, 20A terminal block, 300V terminal block, wire to board terminal, industrial terminal block, power terminal connector Hashtags: #4DBP108 #TerminalBlock #ScrewTerminal #PCBTerminalBlock #BarrierTerminalBlock #ThroughHoleConnector #WireToBoard #PowerConnector #IndustrialConnector #CaptiveScrewTerminal #20ATerminalBlock #300VTerminalBlock #FieldWiringConnector #BoardConnector

NMEA 2000® Micro Panel-Mount Circular Connector – 5-position male panel-mount circular receptacle for NMEA 2000®, marine networking, industrial automation, and sensor interface applications. Features an M12 × 1 threaded coupling, through-hole PCB solder termination, front-panel bulkhead mounting, 4 A current rating, and 60 V AC/DC voltage rating. Constructed with gold-plated copper alloy contacts, a nickel-plated zinc alloy shell, and a PA66 (Nylon 6/6) insulator. Provides IP68 dustproof and waterproof protection, threaded locking, and UL94 V-0 flammability-rated insulation. Specified for operation over a −40°C to +85°C temperature range. #AmphenolLTW #HMC05PMMPSF8001 #NMEA2000 #CircularConnector #M12Connector #PanelMount #MaleReceptacle #PCBConnector #IP68 #MarineElectronics #IndustrialConnector #EmbeddedSystems

12 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.138" (3.50mm) 90°, Right Angle Through Hole 1844317 (Phoenix Contact MC 1,5/12-G-3,5) is a 12-position PCB header designed for pluggable terminal block connections in industrial and automation applications. It belongs to the COMBICON MC 1.5 series and features a 3.5 mm pitch, wave-solder mounting, and tin-plated contacts for reliable wire-to-board connectivity. The connector is rated for 8 A and up to 160 V (depending on the applicable standard), making it suitable for control systems, power distribution, and signal interfaces. Key Features 12-position male PCB header 3.5 mm pitch COMBICON MC 1.5 pluggable terminal block system Rated current: 8 A Rated voltage: 160 V (application dependent) Wave solder mounting Tin-plated copper alloy contacts PBT housing with UL94 V-0 flammability rating Linear pin arrangement Green housing for industrial identification Compatible with Phoenix Contact MC 1.5 series pluggable connectors #CommonPartsLibrary #Connector #PhoenixContact #COMBICON #PCBHeader #TerminalBlock #WireToBoard #IndustrialConnector #WaveSolder #3_5mmPitch #Automation #PCBConnector

15 Position D-Sub Plug, Male Pins Connector The 88615-5005 is a D-subminiature connector manufactured by 3M, configured as a plug-style connector with male pin contacts. D-subminiature connectors, commonly known as D-Sub connectors, are among the most widely used and longest-standing rectangular connector standards in the electronics industry, recognized by their characteristic trapezoidal metal shell that provides a self-aligning, polarized mating interface and a degree of mechanical shielding for the contacts housed within. This particular connector is built around a defined male pin contact arrangement housed within the standard D-shaped metal shell, which serves to guide correct mating alignment with its corresponding female socket connector counterpart while also helping to reduce the risk of bent or damaged pins during the mating process. As a plug-style device with pin contacts, this connector is typically mounted on a cable assembly, panel, or enclosure and is intended to mate with a female D-Sub receptacle mounted on a printed circuit board, another cable assembly, or an equipment panel, forming a complete signal or low-power interconnect path between two systems or subsystems. D-Sub connectors of this style have long been used across an extremely broad range of applications, including legacy computer peripheral interfaces, industrial control systems, test and measurement equipment, instrumentation racks, and many other applications requiring a rugged, field-serviceable, and widely interoperable multi-pin connection. Their enduring popularity stems from the connector family's mechanical robustness, ease of hand assembly and field termination, broad availability of compatible mating hardware such as backshells and hoods, and long-established presence in legacy and ruggedized electronic system designs across commercial, industrial, and aerospace sectors. 3M's D-Sub connector assemblies in this product family are typically constructed using a metal or metal-plated shell to provide mechanical strength and a degree of electromagnetic shielding, paired with an insulating housing that holds the individual pin contacts in precise alignment. The pin contacts themselves are typically machined or stamped from a conductive alloy and plated to ensure low-resistance, corrosion-resistant electrical contact across the connector's service life. As is typical for connectors in this product class, the device is intended for general-purpose signal and low-power interconnection rather than high-speed digital or high-current power transmission, making it well suited to control signal routing, instrumentation wiring, and other moderate-density interconnect applications. Spec Sheet Identification Part Number: 88615-5005 Connector Family: D-Sub Connector Assemblies Manufacturer: 3M Connector Type / Configuration Type: D-Subminiature connector Gender: Plug, male pin contacts Contact Style: Male pins Shell Style: Standard D-shaped trapezoidal metal shell Mechanical Specifications Mounting Style: Cable-mount or panel-mount plug configuration Mating Interface: Standard D-Sub polarized shell, self-aligning Contact Material: Conductive alloy pin contacts, plated for corrosion resistance and low contact resistance Application Context Typical Use: General-purpose signal and low-power interconnection Common Applications: Industrial control systems, instrumentation, test and measurement equipment, legacy peripheral interfaces, panel and rack wiring Compatibility Mates With: Corresponding D-Sub female socket receptacle connector Accessory Compatibility: Compatible with standard D-Sub backshells, hoods, and jackscrew hardware Environmental & Qualification Construction Class: General-purpose connector construction typical of the D-Sub product family RoHS Compliance: Per 3M product documentation for this series Packaging Supply Format: Standard connector packaging per 3M distribution practices #88615 #3M #DSubConnector #DSubminiature #ConnectorAssembly #MalePinConnector #PlugConnector #SignalConnector #IndustrialConnector #InstrumentationConnector #PanelMount #CableAssembly #RectangularConnector #ElectronicComponents #PCBDesign #HardwareEngineering #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #ConnectorDatasheet