Part Datasheet Review


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll review the part metadata, look for an official datasheet if needed, then compare the symbol, footprint, and pin descriptions against the sourced data.
Created a project doc

Part Information Review — TE Connectivity T4041037041-000

View Document

Date: 2026-07-15 Reviewed available part information in the Flux project, added the missing Datasheet URL, and cross-checked the schematic s...
Reviewed the TE Connectivity T4041037041-000 part, added the missing official TE Datasheet URL, and created the detailed report here: Part Information Review.
Open items:
  • Pin Description properties are missing for pins 1–4 and S1/S2.
  • Contact drill Ø1.35 mm is at the max of TE’s Ø1.30 ±0.05 mm callout.
  • Footprint orientation appears correct after CAD Y-axis conversion, but should be visually verified against the TE rear-mount view before release.
Suggested next steps:
  1. Add the missing Pin Description properties.
  2. Optionally change signal drill holes to nominal Ø1.30 mm.
  3. Run/export a footprint check to confirm S1/S2 pad numbering is preserved.
Fix descriptions and verify
Add pin descriptions
Use nominal drills
Verify pad numbering
Run full review

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Passive
2
2
Passive
3
3
Passive
4
4
Passive
SHIELD
S1
Passive
SHIELD
S2
Passive

T4041037041-000