Voltage Level Translator Bidirectional 1 Circuit 8 Channel 60Mbps 20-TSSOP This device is an 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4V and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65V and 5.5V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state. To put the device in the Hi-Z state during power-up or power-down periods, tie OE to GND through a pulldown resistor. The current-sourcing capability of the driver determines the minimum value of the resistor. • No direction-control signal needed • Maximum data rates: – 110Mbps (push pull) – 1.2Mbps (open drain) • 1.4V to 3.6V on A port and 1.65V to 5.5V on B port (VCCA ≤ VCCB) • No power-supply sequencing required – either VCCA or VCCB can be ramped first • Latch-up performance exceeds 100mA per JESD 78, class II • ESD protection exceeds JESD 22 (A port): – 2000 V Human Body Model (A114-B) – 150 V Machine Model (A115-A) – 1000 V Charged-Device Model (C101) • IEC 61000-4-2 ESD (B-port): – ± 8kV Contact Discharge – ± 6kV Air Discharge #commonpartslibrary #integratedcircuit #logic #translator #levelshifter

LED Lighting WL-SWTP White, Warm 2700K 3V 20mA 120° 1206 (3216 Metric) The 158301227 is a surface-mount white LED manufactured by Würth Elektronik, belonging to the WL-SWTP series of top-view PLCC-packaged light-emitting diodes designed for general illumination, backlighting, and signal indication applications in compact electronics. It is built on a gallium nitride semiconductor chip, the standard chip technology used in high-efficiency white LED production, which achieves white light emission by combining a blue GaN die with a phosphor conversion layer that down-converts a portion of the blue photons into broader-spectrum yellow light, with the combined blue and yellow output perceived by the human eye as white light. This particular variant is characterized by a warm white Sunrise color temperature, placing it in the lowest color temperature tier of the WL-SWTP family. Warm white light at this color temperature produces a yellowish, incandescent-like appearance that is widely preferred in residential, hospitality, and ambient lighting applications where a soft, comfortable visual environment is desired. This makes the device a natural fit for LED-based replacements for incandescent and halogen light sources in T5 and T8 fluorescent tube form factor products, as well as indoor display backlights, decorative architectural lighting, and other applications where a warm light quality is specified or preferred by end users. The WL-SWTP series features fast switching, no infrared radiation, high color rendering index, slim and miniature size, low power consumption, suitability for all SMT assembly methods, a top-view emission direction, and a wide viewing angle. The high color rendering index characteristic of this device means that objects illuminated by it appear with colors close to how they would look under natural daylight illumination, which is an important quality metric in retail, museum, medical examination, and other environments where accurate color representation enhances user experience or functional accuracy. Texas Instruments The PLCC package style used in this device is a molded plastic leaded chip carrier format that provides a well-defined, mechanically stable footprint for surface-mount assembly, with the optical emitting surface oriented perpendicular to the PCB plane in the top-view configuration. This top-view orientation makes the device suitable for direct illumination of surfaces positioned above the PCB, such as diffusers, light guides, or display panels mounted parallel to the LED board. The compact 3014 package footprint allows high-density LED arrays to be assembled on narrow PCB strips or modules, which is typical in LED tube light and edge-lit backlight designs. The device is supplied on tape-and-reel packaging suitable for automated high-speed pick-and-place assembly at production volumes. Spec Sheet Identification Part Number: 158301227 Series: WL-SWTP — SMD White Top View PLCC LED Manufacturer: Würth Elektronik GmbH & Co. KG Functional Classification Device Type: Surface-mount white LED Chip Technology: Gallium Nitride (GaN) with phosphor conversion Emission Type: White light via blue die plus phosphor down-conversion View Direction: Top view — perpendicular to PCB surface Optical Characteristics Emitting Color: Sunrise warm white Color Temperature: Warm white class, lowest CCT tier in WL-SWTP family Color Rendering Index: High CRI class, suitable for color-critical applications Viewing Angle: Wide angle, broad spatial distribution Infrared Radiation: None — no IR emission Electrical Characteristics Operating Current: Standard signal LED drive current class Forward Voltage: Standard GaN white LED forward voltage class Switching Speed: Fast switching capable Thermal Characteristics Thermal Resistance, Junction to Solder Point: Defined per series specification Maximum LED Junction Temperature: Rated to elevated junction temperature class Package & Mechanical Package Type: PLCC (Plastic Leaded Chip Carrier), PLCC-2 style Package Size: 3014 SMD footprint Mounting Method: Surface mount technology (SMT) Assembly Compatibility: Suitable for all standard SMT assembly methods including reflow soldering Target Applications Signal indication and pilot lights Indoor display backlighting General illumination and commercial lighting Replacement for PLCC 3528 devices in T8 and T5 LED tube designs Architectural and ambient lighting systems Environmental & Qualification RoHS Compliance: Yes REACH Compliance: Yes Packaging Supply Format: Tape-and-reel Standard Reel Quantity: Standard volume reel per Würth packaging convention #WuerthElektronik #WuerthElectronic #WLSWTP #WhiteLED #WarmWhiteLED #SunriseLED #PLCCLED #SMDLed #3014LED #TopViewLED #GaNLED #HighCRI #LEDBacklight #GeneralIllumination #IndoorLighting #SignalLED #LightingDesign #OptoelectronicComponent #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #REACHCompliant

Human Body Sensing Sensor PIR203A-D0 TO-5-3_BD9.1-P2.54_PIR203A-D0 LCSC Part Number: C2887900 JLCPCB Part Class: undefined Manufactured by NEWOPTO(鑫永诚光电)

Thermal Image Sensor 32H x 24V TO-39 # MLX90640ESF-BAB-000-TU Engineering Specifications **General Description** The MLX90640ESF-BAB-000-TU is a contactless infrared thermal imaging sensor manufactured by Melexis. It incorporates a microbolometer array that detects infrared radiation emitted by objects and converts the captured thermal energy into temperature data, enabling the creation of thermal images without physical contact. The device is designed for compact and cost-effective thermal imaging applications, offering high thermal sensitivity and accurate temperature measurement capabilities. It integrates a digital signal-processing engine, calibration data memory, and a digital communication interface, allowing direct connection to microcontrollers, embedded systems, and industrial monitoring equipment. The sensor provides real-time thermal mapping across its field of view and is suitable for applications involving human presence detection, predictive maintenance, industrial automation, smart building systems, medical screening, consumer electronics, robotics, and thermal monitoring solutions. Its factory calibration ensures stable performance throughout its operating life while minimizing external calibration requirements. **Engineering Specifications** **Manufacturer:** Melexis **Manufacturer Part Number:** MLX90640ESF-BAB-000-TU **Component Type:** Infrared thermal imaging sensor **Sensor Technology:** Microbolometer thermal sensor array **Measurement Method:** Non-contact infrared temperature sensing **Output Type:** Digital thermal image data **Communication Interface:** I²C-compatible serial interface **Temperature Measurement Capability:** Object temperature monitoring and thermal imaging **Thermal Imaging Function:** Real-time thermal map generation **Integrated Processing:** On-chip signal processing and calibration management **Calibration:** Factory calibrated with stored calibration parameters **Power Supply Configuration:** Single-supply operation **Power Consumption:** Optimized for low-power embedded applications **Refresh Rate:** Programmable thermal frame refresh operation **Thermal Sensitivity:** High-sensitivity infrared detection **Field of View Variant:** Wide-angle thermal imaging configuration **Accuracy Characteristics:** High-precision temperature measurement with integrated compensation algorithms **Memory Features:** Internal EEPROM for calibration coefficients **Operating Mode:** Continuous and programmable thermal acquisition **Data Output Format:** Digital temperature and thermal pixel information **Environmental Stability:** Designed for reliable operation across varying ambient conditions **Electromagnetic Compatibility:** Suitable for embedded and industrial electronic systems **Package Type:** Surface-mount package with infrared-transparent window **Mounting Style:** Surface mount technology **Package Construction:** Reflow-solderable assembly **Lead Finish:** Lead-free finish **Environmental Compliance:** RoHS compliant and halogen-free **Reliability Features:** Factory-tested and production-calibrated thermal imaging device **Typical Applications** Thermal cameras Human presence detection systems Occupancy monitoring Industrial predictive maintenance Electrical equipment inspection Smart building automation HVAC monitoring systems Medical screening devices Consumer electronics Robotics and autonomous systems Fire detection and prevention systems Industrial process monitoring Energy management systems Automotive thermal sensing applications Security and surveillance equipment #MLX90640 #MLX90640ESF #Melexis #ThermalSensor #InfraredSensor #ThermalImaging #Microbolometer #TemperatureSensor #IndustrialAutomation #EmbeddedSystems #IoT #PredictiveMaintenance #SmartBuilding #ThermalCamera #ElectronicComponents #EngineeringSpecifications

All details fully confirmed from Azoteq's official IQS7222B datasheet and multiple verified distributor sources. Here's the complete spec. Engineering Specification — IQS7222B102QNR Manufacturer: Azoteq (Pty) Ltd Device Family: IQ Switch® ProxFusion® Series — IQS7222B General Description The IQS7222B102QNR is a high-channel-count capacitive touch and proximity sensing controller integrated circuit manufactured by Azoteq, belonging to the ProxFusion series of intelligent human interface sensing devices. The IQS7222B is a sensor fusion device for various multi-button applications that is fully I²C compatible, with on-chip calculations that enable the IC to respond effectively even in the lowest-power modes. It represents an expanded-channel evolution within Azoteq's IQS7222 family, offering a substantially higher mutual capacitance channel count than the IQS7222A variant while maintaining the same ProxFusion design philosophy of combining sophisticated on-chip sensing intelligence with a minimal external component requirement and a compact surface-mount package. Molex The IQS7222B is a highly flexible ProxFusion device that can configure up to eighteen mutual capacitance buttons or up to eight self-capacitance buttons, with nine external sensor pad connections available in the QFN package variant. Alternatively, it can configure up to twenty mutual capacitance buttons or eighteen mutual capacitance buttons with a proximity wake-up function. This high degree of channel configurability makes the device adaptable to a very broad range of physical interface configurations, from simple multi-button panels to complex touch arrays with simultaneous proximity wake-up capability, all within a single fixed-footprint IC that does not require a change of device between product variants with different button counts. MolexAmazon Target applications for the IQS7222B include remote control user interfaces, home automation device user interfaces, and wireless speaker controls. These application domains share common requirements for robust touch detection through cosmetic overlay materials such as glass, plastic, or painted surfaces, reliable operation in environments where the device may be exposed to moisture or contamination, and power efficiency sufficient to support battery-powered or always-on operation without significantly impacting battery life. The device's on-chip power management architecture, which features automated system power modes for optimal response versus consumption, directly addresses these requirements by allowing the device to spend the majority of its time in a low-current sleep or ultra-low-power state while still waking promptly in response to proximity or touch events. MolexMolex Built-in basic functions include automatic tuning, noise filtering, debounce and hysteresis, and dual direction trigger indication. The automatic tuning capability, implemented through Azoteq's proprietary ATI algorithm, compensates for variations in electrode capacitance that arise from PCB manufacturing tolerances, overlay thickness variation, and environmental factors such as temperature and supply voltage drift. This self-calibration eliminates the need for individual unit factory calibration and ensures consistent touch sensitivity across the full production run of any product built around this device. The noise filtering and debounce functions further improve the reliability of touch event detection in electrically noisy environments, preventing false triggers from electrical interference or mechanical vibration that could otherwise cause spurious button events in poorly filtered designs. Molex Both mutual capacitance and self-capacitance designs are possible with the IQS7222B, giving system designers the flexibility to choose the sensing modality most appropriate for their electrode layout and overlay configuration. Mutual capacitance sensing offers better noise immunity and the ability to detect touch through thicker overlay materials, while self-capacitance sensing allows a simpler single-electrode layout per button with potentially higher raw sensitivity. The I²C communication interface supports IRQ/RDY signaling at speeds up to Fast-Plus mode, providing efficient, low-latency event notification to the host microcontroller without requiring continuous polling of the device. The "QNR" suffix in the part number designates the QFN twenty-pin package variant, which offers the maximum external pad count for mutual capacitance configurations. MolexMolex Spec Sheet Identification Part Number: IQS7222B102QNR Device Family: IQ Switch ProxFusion Series — IQS7222B Manufacturer: Azoteq (Pty) Ltd Part Number Decode IQS7222B: Base device family, B-variant expanded channel count 102: Firmware/configuration variant designation QNR: QFN twenty-pin package, tape-and-reel Functional Classification Device Type: Multi-channel capacitive touch and proximity sensing controller IC Sensing Architecture: ProxFusion sensor fusion engine with on-chip processing Application Class: Multi-button, slider, and wheel human interface controller Channel Configuration Mutual Capacitance Buttons: Up to twenty configurable buttons Mutual Capacitance with Proximity Wake-Up: Up to eighteen mutual capacitance buttons with simultaneous proximity wake function Self-Capacitance Buttons: Up to eight self-capacitance buttons External Sensor Pad Connections: Nine pads available in QFN package Sensing Modalities Mutual Capacitance: Full channel array for high noise immunity and overlay penetration Self-Capacitance: Simplified single-electrode per button layout option Proximity Detection: Pre-touch proximity wake-up capability Built-In Processing Functions Automatic Tuning: Proprietary ATI algorithm for self-calibration and baseline normalization Noise Filtering: Integrated digital filtering for EMI and environmental noise rejection Debounce and Hysteresis: Per-channel configurable debounce and release hysteresis Dual Direction Trigger: Positive and negative delta event detection Host Interface Communication Protocol: I²C fully compatible Speed Grade: Up to Fast-Plus mode Event Signaling: IRQ/RDY interrupt output for host notification I²C Address: Configurable; additional address options available on special request Power Management Operating Modes: Active sensing, idle, and ultra-low-power modes Automated Power Mode Control: System-managed transitions for optimized response versus current consumption ULP Wake Capability: Proximity or touch event wake-up from ultra-low-power state Layout & Application Notes VREG Decoupling: Capacitor required at each VREG pin, placed as close as possible to IC Tx Series Resistance: Nominal series resistance recommended on Rx electrodes to reduce EMI coupling ESD Rating: Pins rated to high HBM ESD performance per JEDEC JEP155 Environmental & Qualification RoHS Compliance: Yes Lifecycle Status: Active production Package Package Type: QFN — Quad Flat No-Lead, twenty-pin Package Designation: QNR variant per Azoteq ordering suffix Mounting Method: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel Target Applications Remote control user interfaces Home automation device controls Wireless speaker and audio device interfaces Multi-button consumer appliance panels IoT device touch interfaces Industrial HMI panels with overlay #IQS7222B #IQS7222B102QNR #Azoteq #ProxFusion #IQSwitch #CapacitiveTouchController #MutualCapacitance #SelfCapacitance #ProximityController #MultiButtonHMI #TouchSensor #ATICalibration #SmartHMI #HomeAutomation #RemoteControl #WirelessSpeaker #IoTDesign #LowPowerSensing #QFN20 #SurfaceMount #EmbeddedHMI #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

ADC, Audio 32 b 7.35k ~ 768k I2C, I2S, TDM 20-WQFN (3x3) The TLV320ADC3120IRTER is a low-power, high-performance stereo audio analog-to-digital converter designed for voice, audio capture, and digital signal processing applications. The device integrates programmable microphone bias generation, low-noise input amplifiers, digital filtering, automatic gain control, and high-resolution audio conversion into a compact package. It supports a wide range of analog microphone and line-level input configurations while delivering excellent audio fidelity and power efficiency. The converter is optimized for portable electronics, smart devices, industrial audio systems, communication equipment, and embedded voice-processing applications requiring high-quality audio digitization. Engineering Specifications Manufacturer: Texas Instruments Part Number: TLV320ADC3120IRTER Device Type: Stereo Audio Analog-to-Digital Converter Audio Channels: Stereo Input Architecture Converter Type: Sigma-Delta Analog-to-Digital Converter Resolution: High-Resolution Audio Conversion Input Configuration: Differential and Single-Ended Inputs Microphone Support: Integrated Microphone Bias Generation Programmable Gain: Integrated Low-Noise Programmable Gain Amplifiers Digital Processing: Integrated Digital Filters Automatic Gain Control: Supported Audio Interface: Digital Audio Serial Interface Power Consumption: Low Power Operation Clocking Support: Flexible Audio Clock Configuration Noise Performance: Low Noise Audio Acquisition Dynamic Range: High Dynamic Range Package Type: WQFN Package Mounting Style: Surface Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Voice Capture Systems, Smart Speakers, Audio Recording Equipment, Industrial Audio Devices, Communication Systems, Embedded Audio Platforms, Human Machine Interfaces, Portable Electronics Key Features High-performance stereo audio conversion Integrated microphone bias circuitry Low-noise programmable gain amplifiers Automatic gain control functionality Flexible digital audio interface support Optimized for voice and audio capture applications Low power consumption for portable devices Integrated digital signal processing features High audio fidelity and dynamic range Compact surface-mount package for space-constrained designs #TLV320ADC3120IRTER #TexasInstruments #AudioADC #AudioConverter #StereoADC #DigitalAudio #VoiceCapture #AudioProcessing #EmbeddedAudio #MicrophoneInterface #AudioElectronics #DSP #IndustrialElectronics #SmartDevices #PortableElectronics #SignalProcessing #SurfaceMount #ElectronicComponents #PCBDesign #AudioSystemDesign

SOP-16 Human Body Sensing Sensor ROHS #CommonPartsLibrary #IntegratedCircuit #Sensor #Human-Sensor

UCS 76 04 Is the intelligent bad point continuous transmission series 4 channel65536, level gray scale function LED drive control special circuit, internal integratedMCU, digital interface, data latch, LED high voltage drive and other circuits. Throughthe peripheral MCU control, the separate brightness and cascade control of the chip canrealize the color dot matrix luminescence control of the outdoor large screen. Intelligent bad point continued transmission series IC adopted, advanced HPD intelligent error signal identification technology, the channel error signal identification rate reached more than 99%, and also used the patented dual decodingengine, at the same time monitoring two channels, any channel signal problem real-timeswitch. UCS 7604 RGBW channel output adopts 65535 level gray scale output, with independent current adjustment function of each channel, high precision constant currentdesign, 16K port refresh frequency, so that the picture effect more restore the real color,rich and gorgeous. Excellent product performance, stable and reliable. Double channel bad point transmission function, fault point signal can continue tobe passed down, the overall failure transmission rate of more than 99% Advanced HPD intelligent error signal identification technology, the channel faultidentification rate of more than 99% The patented dual decoding engine simultaneously monitors and decodes two channels,and any problem in the used channel will be switched to normal in real time Channel, and because it is a real-time switch, it is difficult for the human eyeto find the abnormal picture process Can work normally at any frame frequency Advanced channel fault test function, real-time dynamic light on indicates singlechannel fault and channel short circuit recessive fault in the postpartum test oflamps Grayscale level 65536,8 bit (built-in gamma 2.2, corrected to 16 bit) / 12 / 14 / 16 bitdata optional Port refresh frequency is 16K ± 5% high constant current accuracy design RGBW current per channel can be set independently The applied resistance to set the output current, 0-60 mA Data transmission frequencies of 800K / S and 1.6M / S are optional The 1 / 2 / 3 / 4 field mode is optional Chip VDD built-in 5V voltage regulator, output port pressure maximum 30V RGBW channel off, black S-AI anti-interference patented technology, which can greatly reduce and filter outradiation interference and conduction interference S-Drive drive technology and enhanced receiving technology, greatly enhance theconnection distance between points Industrial-grade design, stable and reliable #CommonPartsLibrary #IntegratedCircuit #LED-Driver #4-channel-output

Low Clamping Voltage; Small Body Outline Dimensions: 0.047 x 0.032 (1.20 mm x 0.80 mm); Low Leakage; Response Time is Typically < 1 ns; IEC6100042 Level 4 ESD Protection and IEC6100044 Level 4 EFT Protection; SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ101 Qualified and PPAP Capable; Peak Power up to 240 Watts @ 8 x 20 s Pulse; Low Body Height: 0.028 (0.7 mm); ESD Rating of Class 3 (> 16 kV) per Human Body Model; These Devices are PbFre 0.7 onsemi SZESD5Z5.0T5G

24 GHz Human Presence Radar Sensor Module – 24 GHz FMCW millimeter-wave human presence detection module designed for smart home automation, occupancy sensing, lighting control, security systems, industrial automation, IoT devices, and embedded presence detection applications. Operates from a 5 V to 12 V supply with a typical current consumption of 79 mA and detects both moving and stationary human targets using Frequency-Modulated Continuous Wave (FMCW) radar technology. Features a UART digital communication interface, configurable detection thresholds, event/occupancy detection, high immunity to ambient light, temperature, smoke, and dust, and supports motion, micro-motion, and static presence detection without requiring direct line-of-sight. The module measures 22 × 16 mm, is designed for surface-mount installation, and operates over a −40°C to +85°C temperature range, making it suitable for long-term embedded and industrial deployments. #HiLink #HLKLD2410CP #HLKLD2410C #24GHzRadar #HumanPresenceSensor #FMCWRadar #OccupancySensor #MotionDetection #UART #IoT #SmartHome #EmbeddedSystems

VU Meter Dot/Bar Display Driver IC – 10-step analog level display driver for audio VU meters, signal strength indicators, battery level monitors, power meters, and instrumentation displays. Features a logarithmic response matched to human hearing, driving 10 LEDs, LCDs, or vacuum fluorescent (VF) displays in either dot or bar mode. Operates from a single 3 V to 25 V supply, includes an adjustable 1.2 V to 12 V precision voltage reference, and provides programmable constant-current LED outputs (typically 2 mA to 30 mA) without requiring external current-limiting resistors. Supports 70 dB display range, expandable multi-device cascading for higher resolution, and offers fast analog response for real-time level indication. Specified for operation over a 0°C to +70°C temperature range and housed in an 18-pin PDIP package. This device is obsolete/Lifetime Buy and is not recommended for new designs. #TexasInstruments #LM3916N1NOPB #LM3916 #VUDriver #BarGraphDriver #DotBarDisplay #LEDDriver #AudioMeter #LevelIndicator #DisplayDriver #PDIP18 #EmbeddedSystems

Human presence sensing module Human Presence Sensing Radar Module for detecting moving and stationary human presence using 24 GHz FMCW radar technology. Operates from a 5 V supply (supports 5–12 V input) with a typical operating current of 80 mA. Provides UART and GPIO (3.3 V logic) interfaces, supports an adjustable detection range of 0.75 m to 6 m, a ±60° detection angle, and 0.75 m distance resolution. Designed for operation over an ambient temperature range of −40 °C to +85 °C. #HumanPresenceSensor #RadarModule #24GHz #FMCW #PresenceDetection #MotionSensor #UART #GPIO #HiLink #LD2410P

Human Body Sensing Sensor PIR223D-S0 TO-5-3_L8.2-W8.2 LCSC Part Number: C2887901 JLCPCB Part Class: Extended Part Manufactured by NEWOPTO(鑫永诚光电)

Buffer, Non-Inverting 1 Element 1 Bit per Element 3-State Output SOT-25 The 74AHCT1G125 is a single non-inverting buffer/bus driver with a 3-state output. The output enters a high impedance state when a HIGH-level is applied to the output enable (OE) pin. The device is designed for operation with a power supply range of 4.5V to 5.5V. • Supply Voltage Range from 4.5V to 5.5V • ± 8 mA Output Drive at 5.0V • CMOS low power consumption • Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for Slower Input Rise and Fall Time. • ESD Protection per JESD 22 o Exceeds 200-V Machine Model (A115-A) o Exceeds 2000-V Human Body Model (A114-A) o Exceeds 1000-V Charged Device Model (C101C) • Latch-Up Exceeds 100mA per JESD 78, Class II • SOT25 and SOT353: Assembled with “Green” Molding Compound (no Br, Sb) #commonpartslibrary #integratedcircuit #logic

The TTP223-BA6 is a single-channel capacitive touch sensor integrated circuit designed to replace traditional mechanical push buttons with a reliable touch-sensitive interface. The device utilizes capacitive sensing technology to detect human touch through conductive and non-conductive surfaces, enabling sleek and durable user interface designs. It features low power consumption, stable operation, high sensitivity, and simple implementation, making it suitable for consumer electronics, home appliances, industrial controls, smart devices, and embedded applications requiring touch-based input functionality. Engineering Specification Device Type Capacitive Touch Sensor Controller Sensing Method Capacitive Touch Detection Channel Configuration Single Touch Input Channel Output Configuration Digital Logic Output Operating Mode Momentary Touch Mode Toggle Touch Mode Sensitivity Control External Adjustment Capability Response Characteristics Fast Touch Detection Response Noise-Resistant Operation Stable Capacitive Sensing Performance Power Characteristics Low Power Consumption Optimized for Battery-Powered Applications Low Standby Current Operation Interface Compatibility Microcontrollers Embedded Processors Digital Logic Systems Human-Machine Interface Circuits Protection Characteristics High Immunity to Environmental Interference Reliable Touch Detection Performance Package Style SOP Surface-Mount Package Mounting Type Surface Mount Technology Applications Touch Buttons Consumer Electronics Home Appliances Smart Switches Control Panels Portable Devices IoT Products Industrial User Interfaces Lighting Controls Interactive Embedded Systems Features Single-Key Capacitive Touch Interface Mechanical Button Replacement Low Power Operation High Sensitivity Detection Adjustable Touch Parameters Compact Package Design Simple Circuit Integration Stable Environmental Performance Long Operational Life RoHS Compliant Construction Manufacturer TONTEK Design Technology #commonpartslibrary #integratedcircuit #touchsensor #capacitivetouch #humanmachineinterface #embeddedsystems #consumerelectronics #industrialelectronics #iot #controlpanel #smartdevices #sensorinterface #digitalinterface #lowpower #electroniccomponents

Originally created by Swaleh Owais, this 3D Printer has a conveyor belt module that autonomously ejects finished print jobs from the printer. This enables the printer to print a constant stream of print jobs without human intervention.

Touchscreen Controller 2 Wire Capacitive I2C Interface 20-VQFN (3x3) The MTCH2120-V/REB specification defines the engineering requirements for a capacitive touch sensing controller integrated circuit designed for human-machine interface applications in embedded electronic systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure accurate touch detection, stable system performance, and reliable operation across consumer, industrial, and embedded environments. The device is intended for use in applications requiring touch-based user input such as control panels, interface buttons, and capacitive sensing surfaces. It provides robust sensing performance with immunity to noise and environmental variation, enabling reliable detection of touch events in compact and low-power electronic designs. Engineering Requirements The integrated circuit shall be manufactured using qualified semiconductor fabrication processes to ensure consistent sensing performance, low power consumption, and long-term operational stability. The device shall support reliable capacitive touch detection under defined electrical and environmental conditions without degradation of sensitivity or accuracy. The sensing architecture shall provide stable touch event detection with immunity to electrical noise, environmental interference, and parasitic capacitance variations. The system shall maintain consistent performance across intended operating conditions including temperature variation and supply voltage fluctuation. Electrical characteristics shall ensure stable digital communication, accurate sensing response, and reliable operation during startup, normal operation, and power transitions. The device shall maintain functional integrity during dynamic system conditions without false triggering or loss of sensitivity. Mechanical and package construction shall be suitable for surface-mount assembly and shall ensure robustness during soldering, handling, and long-term operation. Workmanship shall be free from defects such as contamination, cracks, bonding issues, or structural inconsistencies that could impact electrical or mechanical reliability. Inspection, validation, and testing shall be performed using controlled procedures and calibrated equipment to ensure compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established change control processes. Documentation Supporting documentation shall include official datasheets, reference design materials, electrical characterization reports, qualification data, inspection records, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure traceability and consistency. Revision Control All modifications to this specification shall be managed through formal engineering change control procedures. Each revision shall undergo technical evaluation, validation, and approval prior to implementation to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #CapacitiveTouch #HMI #MicrochipTechnology #EmbeddedSystems #UserInterface #SensorIC #LowPowerDesign #ElectronicsDesign #QualityAssurance #EngineeringDocumentation

Red, Green, Blue (RGB) 624nm Red, 525nm Green, 470nm Blue LED Indication - Discrete 2V Red, 3.3V Green, 3.3V Blue 4-SMD, No Lead # 150080M153000 ## General Description The 150080M153000 is a compact surface-mount full-color RGB LED manufactured by Würth Elektronik as part of the WL-SFCD series. The device integrates red, green, and blue light-emitting elements within a single package, enabling the generation of a wide spectrum of colors for status indication, user interfaces, backlighting, visual notifications, and decorative lighting applications. Its diffused lens design provides uniform light distribution and wide viewing visibility, making it suitable for industrial equipment, consumer electronics, communication devices, instrumentation systems, control panels, and embedded electronic products. The component is optimized for automated assembly processes and offers reliable optical performance, low power consumption, and long operational life. ## Key Features ### Optical Characteristics * Full-color RGB light output * Integrated red, green, and blue emitters * Diffused lens design for uniform illumination * Wide viewing angle * High-visibility indication capability * Consistent color performance ### Electrical Characteristics * Low-power operation * Stable optical output * Suitable for indicator and backlighting applications * Reliable performance across operating conditions * Optimized for embedded electronic systems ### Mechanical Characteristics * Surface-mount package construction * Compact footprint * Low-profile package design * Compatible with automated assembly processes * Reflow-soldering compatible ### Package Construction * Common-anode configuration * Integrated multi-die LED architecture * Rectangular lens geometry * Lead-free package design * Industrial-grade construction ### Material Characteristics * High-quality encapsulation materials * Diffused optical lens * RoHS-compliant construction * Environmentally compliant materials ### Environmental Characteristics * Suitable for commercial and industrial applications * Long operational service life * Reliable operation under standard environmental conditions * Resistant to normal assembly and handling processes ### Application Areas * Status Indicators * User Interface Displays * Industrial Control Panels * Consumer Electronics * Home Appliances * Telecommunications Equipment * Instrumentation Systems * Backlighting Applications * Smart Devices * Embedded Electronic Products * Safety and Security Equipment * Human-Machine Interface Systems ### Compliance * RoHS Compliant * REACH Compliant * Lead-Free Compatible * Industry-Standard Surface-Mount Technology ## Manufacturer Würth Elektronik ## Product Family WL-SFCD SMD Full-Color Chip LED Series #150080M153000 #WurthElektronik #RGBLED #SMDLED #WLSFCD #FullColorLED #LEDIndicator #Backlighting #Optoelectronics #EmbeddedSystems #IndustrialElectronics #ConsumerElectronics #PCBDesign #ElectronicsEngineering #SMTAssembly #commonpartslibrary #optoelectronic #ledindication

133MHz LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHS RP2040 The RP2040 is a high-performance, low-cost 32-bit microcontroller developed by Raspberry Pi Ltd.. It features dual ARM Cortex-M0+ processor cores, flexible digital interfaces, and a unique Programmable I/O (PIO) subsystem that enables custom hardware protocols and timing-critical applications. The device is widely used in embedded systems, IoT devices, robotics, industrial control, consumer electronics, and educational projects. Key Features Dual ARM Cortex-M0+ CPU cores operating up to 133 MHz (up to 200 MHz under specific conditions) 264 KB on-chip SRAM organized in six independent memory banks External QSPI Flash interface with Execute-In-Place (XIP) support and up to 16 MB Flash memory capability 30 multifunction GPIO pins with extensive peripheral multiplexing 2 × UART interfaces 2 × SPI controllers 2 × I²C controllers 16 PWM channels for motor control and signal generation USB 1.1 Host and Device support with integrated PHY 12-bit ADC with four external analog inputs and internal temperature sensor, up to 500 ksps sampling rate 12-channel DMA controller for efficient data transfers Programmable I/O (PIO) subsystem with 8 state machines for implementing custom communication interfaces and precise timing applications Integrated PLLs and programmable LDO regulator for clock and power management Operating voltage range: 1.8 V to 3.3 V Available in a compact 7 mm × 7 mm QFN-56 package Typical Applications IoT and connected devices Industrial automation Robotics and motor control Human-machine interfaces (HMI) Consumer electronics USB peripherals Sensor data acquisition systems Educational and maker projects Custom communication protocol implementations using PIO #CommonPartsLibrary #IntegratedCircuit #Microcontroller

Accelerometer, Gyroscope, 6 Axis Sensor I2C, I3C, SPI Output The BMI323 is a low-power, high-performance inertial measurement unit developed by Bosch Sensortec. It integrates a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package intended for motion sensing applications requiring precise movement detection, orientation tracking, vibration monitoring, and activity recognition. The device is optimized for wearable electronics, industrial sensing, robotics, navigation systems, IoT devices, and consumer electronics where low power consumption and high motion accuracy are critical. The sensor includes advanced digital signal processing, configurable motion-detection features, programmable interrupts, and integrated FIFO buffering to reduce host processor workload and improve system efficiency. Communication is supported through standard digital interfaces, enabling straightforward integration with microcontrollers and embedded platforms. The BMI323 is designed for robust environmental performance and supports flexible power management modes suitable for battery-operated systems. Engineering Specifications Device Type Six-axis inertial measurement unit consisting of: Three-axis accelerometer Three-axis gyroscope Manufacturer Bosch Sensortec Package Compact LGA surface-mount package suitable for automated assembly processes. Accelerometer Characteristics Supports multiple selectable full-scale measurement ranges for motion and acceleration sensing applications. Provides high-resolution digital output with configurable filtering and sampling parameters for low-noise operation and accurate motion analysis. Gyroscope Characteristics Integrated three-axis angular rate sensor with programmable measurement ranges and digital filtering capabilities. Designed for rotational movement tracking, stabilization, gesture recognition, and inertial navigation applications. Digital Interfaces Supports: I²C serial communication SPI serial communication I3C compatible operation Power Features Designed for ultra-low power operation with multiple configurable power modes to optimize energy consumption for portable and battery-powered devices. Embedded Features Includes integrated: FIFO data buffering Motion detection engine Activity and inactivity detection Tap and gesture detection Orientation and tilt sensing Interrupt generation Self-test functionality Output Data Handling Provides configurable output data rates, oversampling settings, and digital filtering options for balancing performance, bandwidth, and power consumption. Temperature Performance Integrated temperature sensing and compensation support for improved measurement stability across varying environmental conditions. Interrupt System Programmable interrupt outputs support event-driven system architectures and allow efficient host wake-up functionality. Operating Environment Designed for operation across industrial and consumer temperature ranges with stable sensor performance under dynamic motion conditions. Applications Suitable for: Wearable devices Smart watches Fitness trackers Industrial motion monitoring Robotics Drones Navigation systems Gaming controllers AR/VR systems IoT motion sensing Human-machine interfaces #commonpartslibrary #integratedcircuit #accelerometer #sensor

Red, Green, Blue (RGB) 626nm Red, 528nm Green, 465nm Blue LED Indication - Discrete 2.15V Red, 2.65V Green, 2.85V Blue 6-PLCC The LRTBGWSR-4U4V-JW+8A8B-D8-3S4U-7Z is an automotive-grade RGB surface-mount LED from the OSIRE® E3635 family by ams OSRAM. It integrates independently controllable red, green, and blue LED chips within a compact 6-PLCC package, enabling precise color mixing and dynamic lighting effects. The device is designed for high-reliability applications requiring full-color illumination, status indication, ambient lighting, and display backlighting. Its wide viewing angle, high luminous intensity, and AEC-Q102 qualification make it suitable for automotive interior lighting, industrial controls, consumer electronics, and advanced human-machine interface applications. Features - Package: white PLCC-6 package, silicone resin - Chip technology: Thinfilm / Volume emitter on Sapphire (AlInGaN) - Typ. Radiation: 120° (Lambertian emitter) - Color: λdom = 626 nm (● red); λdom = 528 nm (● true green); λdom = 465 nm (● blue) - Corrosion Robustness Class: 3B - Qualifications: AEC-Q102 Qualified - ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) Applications - Ambient Lighting - Automotive Aftermarket #CommonPartsLibrary #LED #RGBLED #OSRAM #amsOSRAM #OSIREE3635 #AutomotiveLED #AECQ102 #SMDLED #PLCC6 #IndicatorLED #AmbientLighting #ColorMixing #LRTBGWSR_4U4V_JW_8A8B_D8_3S4U_7Z