802.15.4, Bluetooth Bluetooth v5.0 Transceiver Module Integrated, Ceramic Patch Surface Mount General Description ENW-89854A3KF refers to a designated component, system, or configuration intended for engineering deployment within a defined operational environment. It is designed to meet performance, reliability, and integration requirements consistent with modern engineering standards. The specification outlines the functional expectations, structural considerations, and operational behavior necessary to ensure compatibility with associated systems and to support stable, efficient performance under expected conditions. Scope This specification defines the requirements and characteristics of ENW-89854A3KF, including its intended functionality, performance expectations, environmental tolerance, and integration considerations. It applies to design, development, testing, and implementation phases. Functional Requirements The system shall perform its intended function consistently within defined operational parameters. It shall support continuous operation where required and maintain stability under varying load conditions. The design shall ensure predictable behavior and allow for monitoring and control as necessary. Performance Characteristics The component shall operate efficiently within acceptable performance thresholds. It shall maintain responsiveness and reliability during standard and peak conditions. Performance degradation, if any, shall remain within acceptable engineering tolerances. Design Considerations The design shall prioritize durability, maintainability, and scalability. Materials and architecture shall be selected to ensure long-term operation with minimal failure risk. The system shall support ease of integration with existing infrastructure and allow for future modifications if required. Environmental Conditions The system shall operate within specified environmental ranges, including temperature, humidity, and exposure conditions relevant to its deployment context. Protective measures shall be incorporated where necessary to prevent damage or performance loss. Interface and Integration ENW-89854A3KF shall be compatible with associated systems and interfaces. Communication protocols, physical connections, and data exchange mechanisms shall align with standard engineering practices to ensure seamless integration. Safety and Compliance The design and operation shall adhere to applicable safety standards and regulatory requirements. The system shall include safeguards to prevent hazardous conditions and ensure safe handling and operation. Testing and Validation The system shall undergo verification and validation to confirm compliance with this specification. Testing shall include functional validation, performance assessment, and environmental resilience checks. Maintenance and Support The system shall be designed for ease of maintenance, including accessibility for inspection, repair, or replacement. Documentation and support provisions shall be available to ensure proper lifecycle management. #commonpartslibrary #integratedcircuit #transceiver #wireless #rf

I2S bus & SD for sound, music & digital audio data #Microcontrollers

ESP32-WROOM32 ESP32 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® Smart 4.x Low Energy (BLE) Transceiver 2.4GHz Evaluation Board ESP32-POE is an ESP32-based IoT development board that combines Wi-Fi, Bluetooth, Ethernet connectivity, and Power over Ethernet (PoE) in a single platform. It is designed for industrial automation, smart home systems, remote monitoring, and other network-connected embedded applications where both power and data can be delivered through a single Ethernet cable. The board supports the ESP32 dual-core processor and provides expansion interfaces for sensors, storage, and peripherals. FEATURES • ESP32-WROOM-32 WiFi/BLE module • Ethernet 100Mb interface with IEEE 802.3 PoE support • LiPo battery charger • LiPo battery connector • UEXT connector • User button • Reset button • Micro USB with programmer for ESP32 programming • MicroSD card • Two extension connectors 0.1" step spaced at 1" • PCB dimensions: (75 x 28)mm ~ (3 x 1)" #ESP32 #ESP32POE #IoT #Ethernet #PoE #WiFi #Bluetooth #EmbeddedSystems #IndustrialIoT #SmartHome #OpenSourceHardware #Microcontroller #EdgeComputing #Automation #MakerProjects

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.

Automotive CAN FD Transceiver – High-speed CAN FD transceiver compliant with ISO 11898-2:2016 for automotive ECUs, body electronics, industrial automation, motor control, battery management systems (BMS), and embedded communication networks. Supports Classical CAN and CAN FD communication with data rates up to 8 Mbps, operating from a 4.5 V to 5.5 V supply. Features standby mode with ultra-low power consumption, ±58 V bus fault protection, TXD dominant timeout, thermal shutdown, undervoltage protection, 100 mV receiver hysteresis, and failsafe operation for robust and reliable CAN communication. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C junction temperature range and is housed in a standard 8-pin SOIC package. Unlike the TCAN1462VDRBRQ1, this version does not include Signal Improvement Capability (SIC), making it suitable for conventional CAN/CAN FD networks. #TexasInstruments #TCAN1462VDRQ1 #TCAN1462Q1 #CANFD #CANTransceiver #AutomotiveElectronics #IndustrialCommunication #BatteryManagement #AECQ100 #SOIC8 #EmbeddedSystems

The SIM800C is a Quad-Band GSM/GPRS module in a LCC type which supports GPRS up to 85.6kbps data transfe

5.5x5.0x1.6mm Top SMD Type 0.25 Watt Power integrated light source Intelligent control LED SK6812RGBW-WS is an intelligent RGBW (Red, Green, Blue, Warm White) addressable LED that integrates both the LED package and control IC into a single 5050 SMD package. Each LED functions as an individually controllable pixel, supporting 32-bit color data transmission (8 bits per channel) through a single-wire serial interface. The WS variant features a warm white channel with a color temperature of approximately 2700–3000 K, making it ideal for decorative, ambient, architectural, and smart lighting applications where accurate warm white illumination is required. The device operates from a 5 V supply and supports cascading of numerous LEDs with built-in signal reshaping for reliable long-distance data transmission. Key Features Integrated RGBW LED and control IC in a single 5050 SMD package Dedicated warm white (WS) channel, 2700–3000 K color temperature Individually addressable pixel control 32-bit color data (8-bit Red, Green, Blue, and White channels) Single-wire serial communication interface Built-in constant-current driver and PWM control Signal reshaping and automatic forwarding for long LED chains Typical data transmission rate of 800 kbps Operating voltage: 3.5 V to 5.5 V (5 V nominal) Wide operating temperature range: -40°C to +85°C High brightness, excellent color consistency, and long operational life Suitable for LED strips, pixel displays, decorative lighting, signage, and smart lighting systems #SK6812RGBW #SK6812RGBWWS #AddressableLED #RGBWLED #SmartLED #5050LED #WarmWhiteLED #LEDStrip #PixelLED #DigitalLED #EmbeddedSystems #IoTLighting #LEDDisplay #LightingDesign #Electronics

The Semtech SRDA3.3-6 and SRDA05-6 RailClamp® Low Capacitance TVS Arrays are robust surge-rated diode arrays designed to protect high-speed data interfaces from overvoltage conditions caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. These components integrate surge-rated, low capacitance steering diodes and a transient voltage suppression (TVS) diode into a single package, providing protection for six I/O lines and a power supply line. With a low operating voltage of 3.3V for the SRDA3.3-6 and 5V for the SRDA05-6, these devices exhibit low clamping voltage and capacitance below 15pF, making them ideal for applications such as USB power and data line protection, T1/E1 secondary IC side protection, HDSL, SDSL, video line protection, and microcontroller input protection. The SRDA series complies with IEC 61000-4-2 (ESD) standards up to 15kV (air) and 8kV (contact), IEC 61000-4-4 (EFT) standards up to 40A (5/50ns), and IEC 61000-4-5 (Lightning) standards up to 25A (8/20μs). These devices are housed in a JEDEC SO-8 package, are Pb-Free, Halogen-Free, RoHS/WEEE compliant, and feature a solid-state technology design for reliable performance.

Red, Green, Blue (RGB) 625nm Red, 525nm Green, 470nm Blue LED Indication - Discrete 5V Red, 5V Green, 5V Blue 0605 (1613 Metric) RGB Smart LED with an integrated WS2812B-compatible driver IC, designed for individually addressable full-color lighting using a single-wire serial interface. Operates from a 3.5 V to 5.5 V supply, supports 800 kbps data transmission, 256-level PWM grayscale per RGB channel, 120° viewing angle, and is housed in a compact 1.6 × 1.5 × 0.6 mm SMD package. #RGBLED #SmartLED #AddressableLED #WS2812B #IntegratedDriver #SingleWireInterface #800kbps #256LevelPWM #SMD1615 #XINGLIGHT

SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs, 50 MIPS, 1kword Program RAM, 2kword Data RAM, LQFP-48 sigmadsp audio adc dac LQFP*7x7mm*P0.5mm*

Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius. #Sublayout #Submodule #Altitude #PressureSensor #MPL3115A2

This is a Pet Tracker module based on STM32L4. Tracker connects with network by SIM800L module connected to the STM. Also MCU connected to the GPS by uart and send data to server #STM32 #GPS #G4 #G3 #LTE #IoT #Tracker #reusable #module #edge-computing #edgeComputing #stm #sublayout

This is a Bluetooth Low-Energy (BLE) temperature sensor module. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #module #BLE #ESP32 #reusable #module #simple-embedded #espressif #sublayout

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R3 is a high-precision digital humidity and temperature sensor developed by Sensirion. It integrates calibrated sensing elements, analog signal processing, and a digital communication interface within a compact surface-mount package optimized for space-constrained embedded applications. The device is designed for accurate environmental monitoring across industrial, consumer, HVAC, portable electronics, and IoT systems. The sensor utilizes Sensirion CMOSens® technology to provide stable long-term performance, fast response time, and excellent repeatability under varying environmental conditions. Factory calibration enables direct digital output without the need for external calibration circuitry. The integrated I²C interface simplifies system integration with microcontrollers and embedded processors. The SHT41-AD1B-R3 is engineered for low-power operation, making it suitable for battery-powered and energy-efficient designs. Its compact DFN package supports automated assembly processes and high-density PCB layouts. The device also incorporates advanced internal diagnostics and checksum protection to improve communication reliability and data integrity. Features High-accuracy relative humidity sensing High-accuracy temperature measurement Fully calibrated and linearized digital output I²C digital communication interface Low power consumption optimized for portable systems Fast response and measurement conversion time Excellent long-term stability and repeatability Integrated heater functionality for condensation mitigation Wide operating voltage range Compact surface-mount DFN package Factory-trimmed and tested performance High immunity to environmental stress and contamination Low drift over product lifetime Suitable for reflow soldering processes Electrical Characteristics Supply voltage supports low-voltage embedded systems Digital communication compatible with standard I²C hosts Low standby current consumption Optimized active measurement current Integrated CRC data protection for communication integrity Environmental Characteristics Wide operating temperature range Wide relative humidity operating range Designed for high reliability in industrial and consumer environments Resistant to moisture-induced performance degradation Supports long operational lifetime with stable calibration Package Information Compact DFN surface-mount package Moisture-sensitive device suitable for automated assembly RoHS compliant and halogen-free construction Tape-and-reel packaging configuration for production assembly Applications Environmental monitoring systems HVAC and climate control equipment Smart home and IoT devices Portable electronics Industrial automation systems Data loggers and instrumentation Weather monitoring equipment Indoor air quality monitoring Battery-powered sensor nodes Consumer electronic products #commonpartslibrary #sensor #temperature #humidity #environmentalsensor #i2c #embedded #industrial #iot #sensirion

I2C Isolator with Bidirectional Clock and Data and two 2/0 Auxiliary GPIOs, SOIC-16 i2c isolator additional gpio SOIC*7.5x10.3mm*P1.27mm*

CAN Controller CAN 2.0 SPI Interface 14-VDFN (4.5x3) External CAN FD Controller for adding CAN FD and Classical CAN connectivity to a host MCU via an SPI interface. Supports CAN FD data rates up to 8 Mbps, SPI clock up to 20 MHz, operates from a 2.7 V to 5.5 V supply, and integrates 2 KB message RAM, 31 FIFOs, transmit queue, acceptance filters, and timestamping. #ExternalCANController #CANFD #ClassicalCAN #SPI #8Mbps #20MHzSPI #2.7Vto5.5V #Microchip

ARM® Cortex®-M0+ - Microcontroller IC 32-Bit Dual-Core 133MHz External Program Memory 56-QFN (7x7) Part Description The RP2040 by Raspberry Pi is an ARM® Cortex®-M0+ microcontroller featuring a 32-Bit Dual-Core processor capable of running at 133MHz. It supports external program memory and integrates a comprehensive set of peripherals including I2C, IrDA, QSPI, SPI, UART/USART, USB, and more. This IC is packaged in a 56-pin QFN (7x7) with exposed pads, making it ideal for surface-mount applications and high-density designs. Additional features include integrated data converters (4x12b SAR A/D), 264K x 8 RAM, and robust connectivity along with peripherals like brown-out detection, DMA, I2S, LCD control, POR, PWM, and Watchdog Timer. Note that the image is a representation only; exact specifications must be confirmed via the product datasheet. Manufacturer Lead Time: 8 Weeks Packaging Options: Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Hashtags #RP2040 #ARM #CortexM0Plus #DualCore #133MHz #Microcontroller #Embedded #RaspberryPi #56QFN #SurfaceMount #ExternalMemory #TapeAndReel #CutTape #DigiReel

High-Speed Logic Output Optocoupler – Single-channel high-speed optocoupler designed for digital signal isolation, industrial automation, PLCs, motor drives, switching power supplies, data communication, microcontroller interfaces, and embedded control systems. Features an open-collector TTL-compatible output with a 15 MBd data rate, 5 kVrms isolation voltage, and 10 kV/µs minimum common-mode transient immunity (CMTI) for reliable operation in noisy electrical environments. Provides 75 ns maximum propagation delay, 22 ns typical rise time, 6.9 ns typical fall time, and supports up to 50 mA output current. The input consists of a GaAs infrared LED with a 1.38 V typical forward voltage and 20 mA maximum forward current. Operates from a 4.5 V to 5.5 V output-side supply, over a −40°C to +85°C temperature range, and is housed in a compact 8-pin SOIC (SMD) package for space-efficient PCB designs. #LiteOn #6N137STA1 #6N137 #Optocoupler #LogicOptocoupler #DigitalIsolation #HighSpeedIsolation #IndustrialAutomation #MotorDrive #PLC #EmbeddedSystems

Sub-GHz Wireless Microcontroller – Ultra-low-power Sub-GHz wireless microcontroller integrating a 64 MHz Arm® Cortex®-M0+ core with an RF transceiver for LPWAN, smart metering, industrial IoT, building automation, asset tracking, and wireless sensor networks. Features 128 KB Flash, 32 KB SRAM, and supports Sub-GHz operation from 413–479 MHz and 826–958 MHz (including regional ISM bands), with up to +20 dBm transmit power, −132 dBm receiver sensitivity, and data rates up to 600 kbps. Supports Sigfox, KNX RF, IEEE 802.15.4g, Mioty, and proprietary wireless protocols using 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, ASK, OOK, DBPSK, and DSSS modulation. Operates from a 1.7 V to 3.6 V supply and includes 17 GPIOs, 12-bit ADC, timers, DMA, SPI, I²C, UART/USART, I²S, IrDA, PWM, watchdog, AES hardware accelerator, true random number generator (TRNG), and low-power wake-up receiver. Specified for operation over a −40°C to +105°C temperature range and housed in a 32-pin VFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32WL33KBV7 #STM32WL33 #SubGHzMCU #WirelessMCU #CortexM0Plus #LPWAN #Sigfox #KNXRF #IEEE802154g #Mioty #IoT #EmbeddedSystems

This project is a reference design for an ESP32-WROOM-32D based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU

Video Processor IC 120-VFBGA (6.5x6.5) Package Image Signal Processor (ISP) for processing image data from up to 13 MP primary and secondary camera sensors. Supports 13 MP at 30 fps, 1080p at 120 fps, and 720p at 240 fps, with integrated image processing functions including interlaced HDR (iHDR), auto-exposure, auto white balance, autofocus, face detection, and output formats including JPEG, RAW, RGB565, RGB888, and YUV. #ImageSignalProcessor #ISP #CameraProcessor #13MP #HDR #MIPI #JPEG #RAW #YUV #RGB565 #RGB888 #onsemi

1/1 Transceiver Half CANbus 8-SON (3x3) CAN Transceiver, 3.3-V to 5-V CAN FD and CAN interface device supporting high-speed differential communication. Features a 1-Mbps CAN FD data rate, ±58-V bus fault protection, standby mode, and operates from a 4.5-V to 5.5-V supply. Available in a VSON-8 package. #CANTransceiver #CANFD #DifferentialCommunication #TexasInstruments

SDRAM - Mobile LPDDR4X Memory IC 64Gbit Parallel 2.133 GHz 3.5 ns 200-TFBGA (10x14.5) Mobile LPDDR4X SDRAM provides 64Gb (2G × 32-bit) volatile memory for high-speed, low-power embedded and automotive applications. It supports data rates up to 4266 MT/s (2133 MHz clock), operates with 1.1 V nominal core supply and 0.6 V VDDQ, features a 16n prefetch DDR architecture with 8 banks per channel, and is housed in a 200-ball TFBGA package. #Micron #LPDDR4X #SDRAM #DRAM #Memory #64Gbit #2Gx32 #4266MTs #2133MHz #200TFBGA #Embedded #Automotive #HighSpeedMemory #LowPowerMemory #PCBLibrary