Pin Function Grouping

Set Section to "Analog" on PIO_9/P0-17/ADC_6, Set Pin Group to "ADC GPIO" on PIO_9/P0-17/ADC_6, and 6 more changes

Set PIO_9/P0-17/ADC_6's Section to "Analog"

Set PIO_9/P0-17/ADC_6's Pin Group to "ADC GPIO"

Set PIO_9/P0-17/ADC_6's Pin Description to "GPIO ADC input"

Set PIO_9/P0-17/ADC_6's Sub-symbol Designator Suffix to "ADC GPIO"

Set PIO_9/P0-17/ADC_6's Terminal Order to "9"

Set PIO_9/P0-17/ADC_6's Symbol Pin Position to "{"type":"vector2","data":{"x":-500,"y":-360}}"

Set PIO_6/P0-24/BRSPTOGGLE's Terminal Order to "15"

Set PIO_6/P0-24/BRSPTOGGLE's Symbol Pin Position to "{"type":"vector2","data":{"x":-500,"y":-480}}"

flux

Work done
  • Visually arranged the PAN1780 / ENW-89854A3KF symbol into functional sub-symbol groups: Power/Ground, P0 GPIO, P1 GPIO, ADC GPIO, Trace IF, SWD, USB, NFC, 32k Clock, Reset, and RF.
  • Preserved all 74 unique terminal pin numbers and kept each terminal assigned to exactly one group.
  • Updated the validation notes in PAN1780 / ENW-89854A3KF Pin Group Validation.
Success criteria review
  • ✅ Symbol is divided into the requested functional groups.
  • ✅ Every pin number remains unique and separate, including repeated GND terminals.
  • ✅ ADC-capable pins are grouped only under ADC GPIO, avoiding duplicate membership in P0 GPIO.
  • ✅ Terminal order and symbol pin positions were updated for readability.
Next steps
  • Review the symbol visually in Flux; if you want a different left/right/top/bottom style for any block, I can adjust the grouping layout further.
Reposition key groups
Validate assignments
Split P0 GPIO
Improve descriptions
Sign up to send
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.2k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

ENW-89854A3KF

ENW-89854A3KF thumbnail
802.15.4, Bluetooth Bluetooth v5.0 Transceiver Module Integrated, Ceramic Patch Surface Mount
General Description ENW-89854A3KF refers to a designated component, system, or configuration intended for engineering deployment within a defined operational environment. It is designed to meet performance, reliability, and integration requirements consistent with modern engineering standards. The specification outlines the functional expectations, structural considerations, and operational behavior necessary to ensure compatibility with associated systems and to support stable, efficient performance under expected conditions.
Scope This specification defines the requirements and characteristics of ENW-89854A3KF, including its intended functionality, performance expectations, environmental tolerance, and integration considerations. It applies to design, development, testing, and implementation phases.
Functional Requirements The system shall perform its intended function consistently within defined operational parameters. It shall support continuous operation where required and maintain stability under varying load conditions. The design shall ensure predictable behavior and allow for monitoring and control as necessary.
Performance Characteristics The component shall operate efficiently within acceptable performance thresholds. It shall maintain responsiveness and reliability during standard and peak conditions. Performance degradation, if any, shall remain within acceptable engineering tolerances.
Design Considerations The design shall prioritize durability, maintainability, and scalability. Materials and architecture shall be selected to ensure long-term operation with minimal failure risk. The system shall support ease of integration with existing infrastructure and allow for future modifications if required.
Environmental Conditions The system shall operate within specified environmental ranges, including temperature, humidity, and exposure conditions relevant to its deployment context. Protective measures shall be incorporated where necessary to prevent damage or performance loss.
Interface and Integration ENW-89854A3KF shall be compatible with associated systems and interfaces. Communication protocols, physical connections, and data exchange mechanisms shall align with standard engineering practices to ensure seamless integration.
Safety and Compliance The design and operation shall adhere to applicable safety standards and regulatory requirements. The system shall include safeguards to prevent hazardous conditions and ensure safe handling and operation.
Testing and Validation The system shall undergo verification and validation to confirm compliance with this specification. Testing shall include functional validation, performance assessment, and environmental resilience checks.
Maintenance and Support The system shall be designed for ease of maintenance, including accessibility for inspection, repair, or replacement. Documentation and support provisions shall be available to ensure proper lifecycle management.
#commonpartslibrary #integratedcircuit #transceiver #wireless #rf

Properties

ENW-89854A3KF

Panasonic Industry

Integrated Circuit

mm.digikey.com/Volume0/opasdata/d220001/medias/docus/6799/PAN1780.pdf

U

creativecommons.org/licenses/by/4.0/

parametric-v1

Pricing & Availability

See prices from popular manufacturers for your project.

Controls