This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #edge-computing #edgeComputing #espressif #template

This is a UV sensor circuit module based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #industrialSensing #reusable #module #sublayout #industrialsensing #liteon

LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications

390 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film Carbon film resistor for general-purpose current limiting and voltage division, featuring 390 Ω resistance, ±5% tolerance, 0.25 W (1/4 W) power rating, and a maximum working voltage of 250 V. #CarbonFilmResistor #Resistor #390Ohm #0_25W #5PercentTolerance #ThroughHole #YAGEO

Buck Switching Regulator IC Positive Adjustable 1.8V 1 Output 750mA 8-VFDFN The TPS62840 is a high-efficiency step-down converter with ultra-low operating quiescent current of typically 60 nA. The device contains special circuitry to achieve just 120 nA IQ in 100% mode to further extend battery life near the end of discharge. The device uses DCS-Control to cleanly power radios and operates with a typical switching frequency of 1.8 MHz. In Power-Save Mode, the device extends the light load efficiency down to a load current range of 1 μA and below. 16 predefined output voltages can be selected by connecting a resistor to pin VSET, making the device flexible for various applications with a minimum amount of external components. The STOP pin of the device immediately eliminates any switching noise in order to take a noise-free measurement in test and measurement systems. The TPS62840 provides an output current of up to 750 mA. With an input voltage of 1.8 V to 6.5 V, the device supports multiple power sources such as 2S to 4S Alkaline, 1S to 2S Li-MnO2 , or 1S Li-Ion/LiSOCl2 Features 1• 60-nA operating quiescent current • 100% duty-cycle mode with 120-nA IQ • Input voltage range VIN from 1.8 V to 6.5 V • Output current up to 750 mA • RF friendly DCS-Control™ • 80% efficiency at 1 µA IOUT (3.6 VIN to 1.8 VOUT) • 16 selectable output voltages via VSET pin • Auto transition PFM/PWM or forced-PWM mode • Selectable forced PWM and STOP modes • Output discharge function • 25-nA shutdown current #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

The TPS54331 device is a 28-V, 3-A nonsynchronous buck converter that integrates a low RDS(on) high-side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode feature is automatically activated. Furthermore, the 1-μA shutdown supply-current allows the device to be used in battery-powered applications. Current mode control with internal slope compensation simplifies the external compensation calculations and reduces component count while allowing the use of ceramic output capacitors. A resistor divider programs the hysteresis of the input undervoltage lockout. An overvoltage transient protection circuit limits voltage overshoots during start-up and transient conditions. A cycle-by-cycle current-limit scheme, frequency foldback and thermal shutdown protect the device and the load in the event of an overload condition. The TPS54331 device is available in an 8-pin SOIC package and 8-pin SO PowerPAD integrated circuit package that have been internally optimized to improve thermal performance. • 3.5 to 28-V input voltage range • Adjustable output voltage down to 0.8 V • Integrated 80-mΩ high-side MOSFET supports up to 3-A continuous output current • High efficiency at light loads with a pulse skipping Eco-mode • Fixed 570-kHz switching frequency • Typical 1-μA shutdown quiescent current • Adjustable slow-start limits inrush currents • Programmable UVLO threshold • Overvoltage transient protection • Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protection • Available in easy-to-use SOIC8 package or thermally-enhanced SOIC8 PowerPAD™ integrated circuit package • Create a custom design using the TPS54331 with the WEBENCH® Power Designer • Use TPS62933 for a 30 VIN converter with higher frequency, lower IQ and improved EMI #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Power Supply Controller Digital Power Monitor 10-VSSOP The INA228AIDGSR is a high-precision digital power monitor and current-sense amplifier designed for accurate measurement of shunt voltage, bus voltage, current, power, energy, and charge in DC power systems. The device integrates a low-offset differential amplifier with high-resolution analog-to-digital converters and supports bidirectional current sensing across a wide common-mode voltage range. Communication is provided through an I²C- and SMBus-compatible digital interface, enabling direct telemetry integration into embedded control and battery management systems. The device is optimized for high-accuracy power monitoring applications requiring low drift, low offset, and high dynamic range. Integrated mathematical computation functions reduce host processor overhead by internally calculating current, power, accumulated energy, and charge values. Programmable conversion timing and averaging modes allow optimization between measurement speed and noise performance. The INA228AIDGSR is suitable for server power distribution, industrial automation, telecom infrastructure, automotive subsystems, battery-powered equipment, and precision instrumentation requiring real-time power analytics and fault monitoring. Engineering Specification Device Type Digital power monitor with integrated current-sense amplifier and high-resolution ADC. Measurement Functions Supports measurement of: Differential shunt voltage Bus voltage Current Power Energy accumulation Charge accumulation Temperature through external sensing methods Current Sensing Supports bidirectional current measurements using an external shunt resistor with programmable calibration scaling. ADC Architecture Incorporates high-resolution delta-sigma analog-to-digital converters with programmable conversion time and averaging configuration. Interface Uses I²C- and SMBus-compatible serial communication interface with programmable device addressing. Voltage Monitoring Supports high-side and low-side sensing across a wide common-mode input voltage range suitable for multi-rail power systems. Accuracy Features Includes: Low input offset voltage Low offset drift Precision gain architecture High measurement linearity Integrated calibration engine Power Computation Internally computes: Instantaneous power Average power Energy accumulation over time Charge accumulation over time Alert and Protection Features Provides programmable alert functionality for: Overcurrent Undervoltage Overvoltage Power threshold violations Conversion-ready indication Operating Modes Supports: Continuous conversion mode Triggered conversion mode Low-power shutdown mode Package Information Supplied in a compact VSSOP surface-mount package suitable for automated PCB assembly and space-constrained applications. Temperature Range Designed for operation across industrial temperature environments suitable for embedded and power-management systems. Typical Applications Battery management systems Power supply monitoring Server and telecom power rails Industrial control systems DC energy metering Embedded power analytics Automotive electronics Portable instrumentation #commonpartslibrary #integratedcircuit #powermanagement #powersupplycontroller

Current Sense Amplifier 1 Circuit Single-Ended SOT-23-6 The INA187A3IDBVR is a precision high-side and low-side current sense amplifier designed for accurate bidirectional current measurement in power management, motor control, battery monitoring, and industrial sensing applications. The device integrates a matched precision gain stage optimized for shunt resistor voltage amplification while maintaining excellent common-mode rejection and low offset drift. It supports wide common-mode input voltages, enabling current monitoring across supply rails in automotive, industrial, and embedded systems. The amplifier features fast response characteristics, low quiescent current consumption, and a compact surface-mount package suitable for space-constrained designs. Engineering Specification Device Type Precision Current Sense Amplifier Manufacturer Texas Instruments Manufacturer Part Number INA187A3IDBVR Amplifier Configuration Current shunt monitor with fixed gain Gain Variant High fixed gain configuration optimized for low-value shunt resistor sensing Input Measurement Capability Bidirectional current sensing Common-Mode Voltage Range Supports high-side and low-side sensing across wide supply rails Input Offset Characteristics Low offset voltage with low temperature drift for accurate current measurement Bandwidth Performance Wide bandwidth suitable for dynamic load and transient current monitoring Response Time Fast settling and propagation performance for real-time current feedback systems Power Supply Requirements Single-supply operation compatible with low-voltage logic systems Output Type Analog voltage output proportional to sensed shunt voltage Common-Mode Rejection High common-mode rejection ratio for stable operation in noisy environments Temperature Performance Industrial operating temperature range with stable gain accuracy over temperature Protection Features Robust input structure designed for high common-mode environments Package Type SOT-23 surface-mount package Mounting Method Surface mount technology Typical Applications Battery management systems, power distribution monitoring, motor current feedback, DC/DC converter monitoring, industrial automation, telecom power systems, and embedded power diagnostics. #commonpartslibrary #integratedcircuit #currentsenseamplifier

Digital Potentiometer 10k Ohm 4 Circuit 257 Taps I2C Interface 20-TSSOP # Engineering Specification ## Product Name MCP4461-103E/ST ## General Description MCP4461-103E/ST is a non-volatile digital potentiometer integrated circuit designed to provide electronically programmable resistance adjustment for analog and mixed-signal applications. The device enables precise digital control of resistance values through a serial communication interface, eliminating the need for manual potentiometer adjustments and enhancing system automation capabilities. The component integrates multiple resistor networks, non-volatile memory, and digital control logic within a compact package, making it suitable for signal conditioning, gain adjustment, calibration, offset trimming, volume control, and configuration management applications. The design supports reliable operation in embedded systems, industrial electronics, instrumentation equipment, communication devices, and consumer products requiring programmable analog control. The device is optimized for ease of integration, low power consumption, repeatable performance, and long-term reliability. Non-volatile memory functionality allows resistance settings to be retained during power interruptions, supporting consistent system behavior and simplified startup configuration. ## Functional Requirements ### Digital Resistance Control The device shall provide programmable resistance adjustment through a digital communication interface. ### Non-Volatile Memory Operation The device shall retain programmed resistance settings when power is removed and restore stored values upon power-up. ### Multi-Channel Adjustment The device shall support independent control of multiple resistance channels for flexible system configuration. ### Analog Signal Conditioning The device shall support use in gain control, calibration, bias adjustment, offset correction, and signal tuning applications. ## Electrical Requirements ### Power Supply Compatibility The device shall operate from standard low-voltage electronic power supply rails suitable for embedded and industrial systems. ### Digital Communication The device shall support serial communication for configuration, programming, and control of internal resistance networks. ### Resistance Network Performance The device shall provide repeatable and stable resistance adjustment characteristics throughout normal operating conditions. ### Low Power Operation The device shall minimize power consumption while maintaining functional performance and memory retention capability. ### Noise and Signal Integrity The design shall support accurate analog signal processing with minimal impact on system performance. ## Mechanical Requirements ### Package Construction The component shall be supplied in a surface-mount package suitable for automated PCB assembly processes. ### Board Integration The device shall support standard printed circuit board mounting practices and electronic manufacturing workflows. ### Structural Reliability The package shall maintain electrical and mechanical integrity during handling, assembly, and operational service. ## Environmental Requirements ### Operating Environment The device shall operate reliably within environmental conditions commonly encountered in commercial and industrial electronic equipment. ### Storage Conditions The component shall maintain functional and physical integrity during storage, transportation, and inventory management activities. ### Environmental Robustness The design shall support stable operation under expected temperature and humidity variations within specified application environments. ## Quality Requirements ### Reliability The device shall provide consistent long-term performance with stable resistance characteristics and memory retention capability. ### Verification Electrical functionality, communication performance, memory operation, and resistance adjustment behavior shall be validated through applicable testing procedures. ### Compliance The product shall conform to relevant semiconductor manufacturing, quality assurance, and electronic component standards. ## Documentation Requirements Technical documentation shall include device functionality, communication interface requirements, programming guidelines, application recommendations, electrical characteristics, package information, and reliability considerations. ## Classification Tags #MCP4461 #MCP4461103EST #DigitalPotentiometer #NonVolatileMemory #IntegratedCircuit #ICComponent #AnalogElectronics #MixedSignalDesign #SignalConditioning #GainControl #CalibrationCircuit #EmbeddedSystems #ElectronicComponents #ElectricalEngineering #PCBDesign #CircuitDesign #IndustrialElectronics #Instrumentation #CommonPartsLibrary #EngineeringSpecification #ComponentLibrary #TechnicalDocumentation #SystemIntegration #HardwareDevelopment #ReliabilityEngineering

332 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3323-B-T5 is a surface-mount thick film chip resistor designed for general-purpose electronic applications. It features a compact 0603 (1608 metric) package, offering stable electrical performance, high reliability, and suitability for automated assembly. This resistor is commonly used in signal conditioning, voltage division, and current limiting circuits across consumer and industrial electronics. Key Features Compact 0603 (1608 metric) SMD package Thick film resistor technology High reliability and stability Suitable for reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 332 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical for precision grade) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Complies with standard IEC test methods Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal processing Industrial control systems Consumer electronics #CommonPartsLibrary #Resistor #CRCW0603

This is a QRE1113 opto-reflective sensor module, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #OpticalSensor #industrialSensing #reusable #module #industrialsensing #onsemi #sublayout

Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems

Configuration Features: Number of Resistors 1 | Dimensions: Product Height .35 MM | Product Length .039 INCH | Product Width .02 INCH | Product Height .014 INCH | Product Width .5 MM | Product Length 1 MM | Electrical Characteristics: Operating Voltage 50 V | Resistance Value 47K OHM | Passive Component Tolerance 1 PCT | Power Rating .063 WATT | Resistance Class 1k 1M | Packaging Features: Packaging Method Taped & Reeled | Product Type Features: Element Type Thick Film | Resistor Type General Purpos

Hot Swap Controller 1 Channel General Purpose 32-LQFN (5x5) The NCP81428MNTXG is a high-performance multi-phase synchronous buck controller designed for CPU, GPU, FPGA, ASIC, and high-current core power applications requiring accurate voltage regulation, fast transient response, and high efficiency. The device supports multi-phase operation with integrated gate drivers and advanced control architecture optimized for modern low-voltage, high-current power rails. It is intended for applications requiring dynamic voltage scaling, precise load-line regulation, and reliable system power management in computing, networking, telecommunications, and industrial platforms. The controller operates with external MOSFET stages and supports flexible power stage configuration for optimized thermal and efficiency performance. It incorporates differential voltage sensing, programmable protection features, current balancing between phases, and high-speed transient compensation to maintain stable operation under rapidly changing load conditions. Engineering Specification Manufacturer onsemi Manufacturer Part Number NCP81428MNTXG Device Type Multi-Phase Synchronous Buck Controller with Integrated Gate Drivers Control Topology Voltage Mode Multi-Phase PWM Control Phase Configuration Dual-Phase Controller Architecture Application Focus CPU Core Power GPU Core Regulation FPGA Power Rails ASIC Core Supplies High-Current DC-DC Regulation Input Supply Range Supports Low-Voltage Bias Supply Operation for Digital Power Systems Output Voltage Regulation Programmable Low-Voltage Output Regulation with Differential Remote Sense Capability Switching Frequency Programmable PWM Switching Frequency with Multi-Phase Interleaving Gate Driver Integration Integrated High-Side and Low-Side MOSFET Gate Drivers Current Sensing Supports Inductor DCR Sensing and Sense Resistor Current Monitoring Load-Line Support Programmable Load-Line Regulation and Droop Compensation Voltage Positioning Adaptive Voltage Positioning for Improved Transient Performance Protection Features Overcurrent Protection Overvoltage Protection Undervoltage Protection Thermal Protection Short-Circuit Protection Power-Good Monitoring Power Management Features Soft-Start Control Enable Functionality Phase Balancing Fault Monitoring Sequencing Support Compensation External Compensation Network Support for Loop Stability Optimization Efficiency Features Synchronous Rectification Support Multi-Phase Interleaving for Reduced Ripple Current Optimized Gate Drive Timing Package Type QFN Surface-Mount Package Mounting Type Surface Mount Technology Temperature Range Industrial Operating Temperature Range Target Applications Server Motherboards High-Performance Embedded Computing Networking Equipment Telecommunications Infrastructure Industrial Processing Systems Graphics and Accelerator Platforms #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

TM1814 is four channels LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM to TM1814. When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc. Internal VDD pin is integrated with 5V regulator with less peripheral devices, which applies to guardrail tube, point source and LED decorative products. This product has excellent performance and reliable quality. Features  Adopt power CMOS technology  Withstand voltage of OUT output port is 32V  5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor  Constant current can achieve level 64 adjustment (6.5 mA-38mA)  PWM brightness controls circuit, and 256 brightness is adjustable  Accurate current output value Maximum error (between channels): ±3% Maximum error (between chips): ±5%  Single line serial concatenated port  Oscillation mode: build in RC vibration and conduct clock synchronization according to signals on data line. After receiving the data from this unit, it can reproduce follow-up data and send it to lower level through data output end, and signals will not be distorted and reduced along with cascade  Build in power on reset circuit, and after powering on reset, all registers are initialized to zero  External control mode data transmission rate is 800 KHZ  Internal control mode data transmission rate is 500 KHZ  Internal control mode chip sends 2048 points of data  Encapsulation mode: SOP8 #CommonPartsLibrary #IntegratedCircuit

36.5 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3652-B-T5 is a precision surface-mount thick film chip resistor in a 0603 (1608 metric) package. It is designed for applications requiring tight tolerance and stable temperature performance. The component is suitable for high-accuracy circuits such as instrumentation, signal conditioning, and precision voltage division. Key Features Compact 0603 (1608 metric) SMD package High precision ±0.1% tolerance Low temperature coefficient Stable performance over wide temperature range Compatible with standard reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 36.5 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Meets standard IEC requirements Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal conditioning Measurement and instrumentation systems Industrial and consumer electronics #CommonPartsLibrary #Resistor

Power Switch/Driver 1:1 P-Channel 2A SOT-23-5 The GLF1100 is an ultra-efficiency, 2 A rated, Load Switch with integrated slew rate control. The best in class efficiency makes it an ideal chose for use in IoT, mobile, and wearable electronics. The GLF1100 features ultra-efficient IQSmartTM technology that supports the lowest quiescent current (IQ) and shutdown current (ISD) in the industry. Low IQ and ISD solutions help designers to reduce parasitic leakage current, improve system efficiency, and increase battery lifetime. The GLF1100 integrated slew rate control can also enhance system reliability by mitigating bus voltage swings during switching events. Where uncontrolled switches can generate high inrush currents that result in voltage droop and/or bus reset events, the GLF slew rate control specifically limits inrush currents during turn-on to minimize voltage droop. GLF1100 Load Switch devices support an industry leading wide input voltage range and helps to improve operating life and system robustness. Furthermore, one device can be used in multiple voltage rail applications which helps to simplify inventory management and reduce operating cost. FEATURES • Wide Input Range: 1.1 V to 5.5 V 6 V abs max • RON : 82 mΩ Typ @ 5.5 VIN • IOUT Max: 2 A • Ultra-Low IQ: 10 nA Typ @ 5.5 VIN • Ultra-Low ISD: 25 nA Typ @ 5.5 VIN • Controlled Rise Time: 2.2 ms at 3.3 VIN • Internal EN Pull-Down Resistor • Integrated Output Discharge Switch • Wide Operating Temperature Range: -40 °C ~ 85 °C • HBM: 6 kV, CDM: 2 kV APPLICATIONS • Telecommunication Module • Low Power Subsystem • Mobile Devices #commonpartslibrary #integratedcircuit #powermanagement #LoadSwitch #PowerManagement #PMIC #HighSideSwitch #LowPower #BatteryPowered #PortableElectronics #GLFIntegratedPower #SOT23 #PowerDistribution

Adjustable Low-Dropout (LDO) Linear Voltage Regulator – Positive adjustable LDO voltage regulator designed for power supplies, industrial control systems, embedded electronics, consumer devices, communication equipment, and analog circuits. Delivers up to 800 mA output current with an adjustable output voltage range of 1.25 V to 13.8 V using an external resistor divider. Operates from an input voltage up to 15 V with a maximum dropout voltage of 1.2 V at 800 mA, making it suitable for low-dropout linear regulation. Features 1% output voltage accuracy, 75 dB PSRR (120 Hz), 5 mA typical quiescent current, current limiting, and thermal shutdown protection for reliable operation. Designed for surface-mount applications in a TO-252-3 (DPAK) package and operates over a 0°C to +125°C temperature range. #TexasInstruments #LM1117DTADJNOPB #LM1117 #LDO #LinearRegulator #VoltageRegulator #AdjustableRegulator #PowerManagement #DPAK #EmbeddedSystems

12V to fixed 5V 2A Non-Synchronous Step-Down Regulator. The TPS5405 is a monolithic non-synchronous buck regulator with wide operating input voltage range from 6.5 V to 28 V. Current mode control with internal slope compensation is implemented to reduce component count. TPS5405 also features a light load pulse skipping mode, which allows for a power loss reduction from the input power supply to the system at light loading. The switching frequency of the converters can be set from 50 kHz to 1.1 MHz with an external resistor. Frequency spread spectrum operation is introduced for EMI reduction. LX anti-ringing is added to address high frequency EMI issues. A cycle-by-cycle current limit with frequency fold back protects the IC at over loading condition.