Bipolar Motor Driver NMOS On/Off, PWM 44-HTSSOP The DRV8262QDDWRQ1 is an automotive-qualified, high-power H-bridge motor driver from Texas Instruments designed for 24 V and 48 V automotive systems. It integrates two H-bridges capable of driving one or two brushed DC motors, a bipolar stepper motor, or thermoelectric coolers (TECs). The device features integrated high-side current sensing, programmable current regulation, and comprehensive protection functions, eliminating the need for external current-sense resistors while reducing PCB area and system cost. It supports wide supply voltages from 4.5 V to 60 V, making it suitable for demanding automotive body electronics and industrial motor control applications. Key Features Automotive AEC-Q100 Grade 1 qualified (-40°C to +125°C) Wide 4.5 V to 60 V operating supply voltage Dual H-bridge or single high-current H-bridge operation Drives: One or two brushed DC motors One bipolar stepper motor One or two thermoelectric coolers (TECs) Up to 8 A peak (dual H-bridge mode) Up to 16 A peak (single H-bridge mode) Low MOSFET on-resistance: 100 mΩ (dual H-bridge) 50 mΩ (single H-bridge) Integrated high-side current sensing with ±4% accuracy Programmable current regulation and current limiting Supports 1.8 V, 3.3 V, and 5 V logic interfaces Configurable PWM control modes (PH/EN or IN/IN) Ultra-low 3 µA sleep current Integrated protection features: Undervoltage Lockout (UVLO) Charge Pump Undervoltage (CPUV) Overcurrent Protection (OCP) Thermal Shutdown (OTSD) Fault output (nFAULT) Functional safety-capable with supporting documentation for automotive system design. #DRV8262QDDWRQ1 #MotorDriver #HBridge #AutomotiveElectronics #BrushedDCMotor #StepperMotor #CurrentSense #AECQ100 #TexasInstruments #EmbeddedSystems #PowerManagement #PCBDesign

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL345

Battery Fuel Gauge IC Lithium Ion/Polymer 24-TQFN (4x4) The MAX17320G20+ is a high-accuracy, ultra-low-power fuel gauge and battery protector IC designed for 2-cell to 4-cell lithium-ion and lithium-polymer battery packs. The device integrates Maxim Integrated’s ModelGauge™ m5 EZ algorithm to provide precise battery state-of-charge estimation without requiring battery relearning after system resets or battery replacement. It is optimized for portable, wearable, industrial, and IoT battery-powered applications where accurate battery monitoring and robust protection are required. The device combines fuel gauging, battery authentication support, autonomous battery protection, current sensing, and voltage monitoring into a single integrated solution. It includes configurable protection features such as overvoltage, undervoltage, overcurrent, short-circuit, and thermal protection, helping improve system safety and battery reliability. The MAX17320G20+ communicates through an I²C-compatible interface and supports low-power operation for extended battery runtime. Features High-accuracy battery fuel gauge for multi-cell lithium-ion batteries Supports 2-cell to 4-cell battery pack configurations Integrated ModelGauge m5 EZ algorithm with no battery relearning required Integrated battery protector with autonomous safety monitoring Supports overvoltage, undervoltage, overcurrent, short-circuit, and thermal protection Integrated current-sense amplifier for accurate current measurement Low quiescent current optimized for portable and always-on systems I²C-compatible communication interface Configurable alert and interrupt functions Battery aging compensation and cycle tracking Supports battery authentication functionality Integrated ADCs for voltage, current, and temperature monitoring Programmable protection thresholds and timing parameters Low-power hibernate and sleep operating modes Electrical Characteristics Designed for lithium-ion and lithium-polymer battery chemistries Supports battery stack voltages corresponding to 2S to 4S configurations High-resolution voltage, current, temperature, and capacity measurements Low operating current suitable for battery-powered systems Integrated precision coulomb counter Wide operating temperature range suitable for industrial applications Protection Functions Cell overvoltage protection Cell undervoltage protection Charge overcurrent protection Discharge overcurrent protection Short-circuit protection Overtemperature and undertemperature protection Permanent failure detection and fault logging Autonomous FET control for pack isolation Interface and Control I²C serial communication interface Programmable registers for protection and fuel gauge configuration Interrupt and alert outputs for fault and status indication Supports host processor communication and diagnostics Nonvolatile memory for configuration storage Package Information Package type is TQFN Compact surface-mount package suitable for space-constrained designs RoHS compliant and lead-free package option Typical Applications Smart battery packs Portable medical devices Industrial handheld equipment IoT and wireless sensor devices Battery-powered consumer electronics Portable test and measurement systems Rechargeable multi-cell battery systems #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement

NTC Thermistor 10k 0805 (2012 Metric) The TX08F103F3435ER is a surface-mount NTC (Negative Temperature Coefficient) thermistor designed to measure temperature by changing its resistance as temperature varies. It is commonly used in compact electronics for temperature monitoring, control, and protection circuits. It comes in a small 0805 (2012 metric) SMD package, making it suitable for high-density PCB designs. ⭐ Key Features NTC thermistor (negative temperature coefficient type) Nominal resistance: 10 kΩ @ 25°C B-value: 3435 K (B25/85) High precision: ±1% resistance tolerance B-value tolerance: ±1% SMD package: 0805 (2012 metric size) Wide operating temperature range: -40°C to +125°C Low power dissipation (max ~130 mW) Fast thermal response due to small package size RoHS compliant and suitable for automated PCB assembly Designed for temperature sensing, compensation, and control applications #commonpartslibrary #ntc #thermistor

Air Quality Sensors VOC and NOx (MOX) Gas Pollutant Sensor The SGP41-D-R4 is a compact digital gas sensor developed by Sensirion for indoor air quality monitoring applications. It is designed to detect volatile organic compounds (VOC) and nitrogen oxides (NOx) using Sensirion’s CMOSens® sensor technology. The device integrates sensing elements, analog front-end circuitry, calibration memory, and digital signal processing within a miniature surface-mount package, enabling accurate and reliable environmental sensing with minimal external components. The sensor communicates through a standard I²C digital interface and is optimized for low-power operation, making it suitable for battery-powered and portable electronic systems. The SGP41 is intended for use in air purifiers, HVAC systems, smart home devices, wearable electronics, environmental monitoring equipment, and other applications requiring real-time indoor air quality assessment. The device supports humidity-compensated measurements when paired with an external humidity and temperature sensor, improving long-term stability and measurement accuracy. Factory calibration eliminates the need for manual calibration during manufacturing. Key Features Digital VOC and NOx gas sensing CMOSens® technology integration I²C communication interface Fully calibrated and linearized output Humidity compensation capability Low power consumption operation Compact DFN surface-mount package Fast response and recovery characteristics Optimized for indoor air quality applications RoHS and halogen-free compliant Electrical Characteristics Supply voltage operation compatible with low-voltage embedded systems Low average current consumption suitable for portable devices Integrated digital signal processing and calibration memory I²C serial communication support with standard addressing Stable operation across industrial temperature ranges Mechanical Characteristics Small DFN package optimized for compact PCB layouts Surface-mount assembly compatible Low-profile package suitable for space-constrained designs Moisture-sensitive device requiring proper handling during assembly Functional Characteristics Simultaneous VOC and NOx sensing capability Real-time indoor air quality monitoring Compensation support for environmental humidity effects Long-term measurement stability Fast startup and measurement readiness Designed for continuous sensing applications Typical Applications Indoor air quality monitoring systems Smart thermostats and HVAC controllers Air purifiers and ventilation systems Smart home and IoT devices Portable environmental monitoring equipment Wearable health and wellness devices Building automation systems Consumer electronics requiring air quality detection #Sensor #Transducer #Gas#Sensor #SGP41

±1-V input, precision voltage sensing reinforced isolated amplifier with integrated DC/DC 16-SOIC #commonpartslibrary #integratedcircuit #linearamplifier

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41I-AD1B-R2 is a high-accuracy digital humidity and temperature sensor from Sensirion designed for industrial and harsh-environment applications requiring reliable environmental monitoring. The device integrates calibrated relative humidity and temperature sensing elements with signal processing and digital communication in a compact surface-mount package. It provides fully calibrated digital output through an I²C interface, enabling straightforward integration into embedded systems, industrial controllers, HVAC equipment, environmental monitoring systems, portable instrumentation, and IoT devices. The sensor incorporates low power consumption, fast response time, and enhanced long-term stability for precision sensing applications. Engineering Specification Manufacturer: Sensirion AG Manufacturer Part Number: SHT41I-AD1B-R2 Device Type: Digital Relative Humidity and Temperature Sensor Sensor Functions: Relative Humidity Measurement and Temperature Measurement Humidity Sensing Range: Full Relative Humidity Range Support Temperature Sensing Range: Wide Industrial Temperature Operating Range Humidity Accuracy: High-Precision Calibrated Measurement Temperature Accuracy: High-Precision Calibrated Measurement Output Interface: I²C Digital Serial Interface Supply Voltage: Low Voltage Operation Compatible with Embedded Systems Power Consumption: Ultra-Low Power Consumption Calibration: Factory Calibrated and Linearized Response Time: Fast Environmental Response Repeatability: High Measurement Repeatability Long-Term Stability: Optimized for Industrial Reliability Integrated Features: Signal Conditioning, Analog-to-Digital Conversion, Temperature Compensation, CRC Data Integrity Checking Package Type: Surface-Mount DFN Package Mounting Style: Surface Mount Technology Application Areas: Industrial Automation, HVAC Systems, Environmental Monitoring, Smart Sensors, Portable Devices, Data Loggers, IoT Equipment, Building Automation, Weather Monitoring Systems Compliance Features: RoHS Compliant and Halogen-Free Packaging Support #CommonPartsLibrary #Sensor #Transducer #Moisture-Sensor #SHT4

20 Hz ~ 20 kHz Digital, PDM Microphone MEMS (Silicon) 1.62 V ~ 3.6 V Omnidirectional (-36dB ±1dB @ 94dB SPL) Solder Pads The IM69D130V01XTSA1 is a high-performance digital MEMS microphone designed for applications requiring compact size, low power consumption, and reliable acoustic performance. The device integrates a MEMS sensing element with signal conditioning and digital output functionality within a surface-mount package suitable for automated assembly processes. The component is intended for use in voice-enabled systems, consumer electronics, industrial equipment, communication devices, and embedded audio applications where consistent sensitivity, low noise operation, and environmental robustness are required. The microphone supports digital audio interfacing and is optimized for far-field voice capture and speech recognition environments. The device construction is designed to provide stable operation under standard environmental and mechanical conditions. It is compatible with modern PCB manufacturing processes and supports integration into space-constrained electronic assemblies. Electrical and acoustic characteristics are engineered to maintain reliable performance across varying operating conditions. The component complies with standard electronic manufacturing and handling requirements for moisture sensitivity, electrostatic discharge protection, and reflow soldering compatibility. Proper PCB layout, grounding practices, and acoustic port alignment are recommended to achieve optimal system-level performance. #CommonPartsLibrary #Audio #MEMS #Microphone

Accelerometer, Gyroscope, Magnetometer, 9 Axis Sensor I2C, SPI, UART Output The BNO085 is a high-performance 9-axis absolute orientation sensor system-in-package (SiP) that integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and a low-power ARM Cortex-M0+ microcontroller running CEVA/Hillcrest SH-2 sensor fusion firmware. It provides accurate real-time orientation, motion tracking, and activity detection while offloading complex sensor fusion calculations from the host processor. The device is widely used in robotics, AR/VR systems, wearables, drones, IoT devices, and navigation applications. Key Features 9-axis motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in SH-2 sensor fusion engine for accurate orientation tracking ARM Cortex-M0+ processor for onboard motion processing Outputs quaternion, rotation vector, linear acceleration, gravity vector, angular velocity, and magnetic field data Advanced motion detection including tap, step, shake, and significant motion detection Activity classification and stability detection capabilities Low-latency rotation vectors optimized for AR/VR applications Supports I²C, SPI, and UART communication interfaces Configurable output data rates and timestamps Low-power operation suitable for battery-powered devices Compact 28-pin LGA package (5.2 mm × 3.8 mm) Operating temperature range: -40°C to +85°C Backward compatible with BNO080 designs while adding support for future application-specific libraries Applications Robotics and autonomous systems Virtual Reality (VR) and Augmented Reality (AR) Wearable devices and fitness trackers Drones and UAVs Head-mounted displays (HMDs) Industrial motion tracking IoT and smart devices Navigation and positioning systems #BNO085 #IMU #9AxisSensor #MotionTracking #SensorFusion #OrientationSensor #Robotics #AR #VR #IoT #Wearables #EmbeddedSystems #CEVA #HillcrestLabs #MotionDetection #Quaternion #InertialMeasurementUnit

ARM® Cortex®-M7 S32K3 Microcontroller IC 32-Bit 160MHz 4MB (4M x 8) FLASH 172-QFP (16x16) S32K344EHT1VPBST is an automotive-grade 32-bit microcontroller from NXP Semiconductors based on the Arm Cortex-M7 core architecture. The device is designed for high-performance real-time automotive body, chassis, powertrain, and domain control applications requiring functional safety, security, and advanced communication interfaces. It integrates high-speed processing capability, extensive peripheral integration, hardware security acceleration, and deterministic control functions suitable for safety-critical embedded systems. The microcontroller operates with an Arm Cortex-M7 CPU core running at high frequency with floating-point support and DSP extensions for computationally intensive applications. Integrated flash memory and SRAM provide embedded program and data storage optimized for automotive embedded control systems. The device supports hardware-assisted security features including secure boot, cryptographic acceleration, and tamper protection for secure automotive network communication and firmware integrity. The S32K344EHT1VPBST includes multiple communication peripherals supporting CAN FD, FlexCAN, LIN, SPI, UART, I2C, and Ethernet interfaces for distributed automotive networking and gateway applications. Advanced analog integration includes ADC modules, timers, PWM generators, watchdogs, and motor-control-oriented peripherals enabling precision sensing and control functionality. The device supports functional safety development aligned with ISO 26262 requirements and includes error correction, memory protection, fault monitoring, and safety management features. Power management functionality supports low-power operating modes for energy-efficient automotive electronic control units. The microcontroller is housed in a thermally enhanced LQFP package suitable for automotive operating environments with extended temperature capability and AEC-Q100 qualification for automotive reliability standards. #commonpartslibrary #integratedcircuit #microcontroller #arm #m7

1 mOhms ±1% 4W Chip Resistor Nonstandard Automotive AEC-Q200, Current Sense Metal Element Bourns Inc. CSS4J-4026R-1L00F is a high-power surface-mount current sense resistor designed for accurate current measurement in power electronics applications. It belongs to the CSS4J-4026 series and uses a metal element construction that provides low resistance, high power handling, and excellent stability for automotive and industrial applications. This device features a 1 mΩ resistance value, ±1% tolerance, and 4 W power rating, making it suitable for monitoring high-current paths while minimizing measurement losses. It is also qualified for AEC-Q200 automotive applications and operates across a wide temperature range. Key Features Component Type: SMD Current Sense Resistor (Metal Element / Metal Strip) Resistance Value: 1 mΩ (0.001 Ω) Resistance Tolerance: ±1% Power Rating: 4 W Package Size: 4026 (approx. 10.06 mm × 6.60 mm) Number of Terminals: 4 terminals (Kelvin sensing configuration) Temperature Coefficient: approximately ±75 ppm/°C Operating Temperature Range: −55°C to +170°C Construction: Metal element current shunt resistor for accurate current measurement Qualification: Automotive AEC-Q200 compliant Typical Applications Battery Management Systems (BMS) EV and automotive power systems Motor control circuits Power supplies and DC/DC converters Overcurrent monitoring and protection circuits Industrial power monitoring equipment #CommonPartsLibrary #Bourns #CSS4J4026 #CurrentSenseResistor #ShuntResistor #MetalElementResistor #AECQ200 #PowerElectronics #BatteryManagementSystem #EVElectronics #SMTComponents #PCBDesign

Connector Header Through Hole 6 position 0.100" (2.54mm) The PEC06SAAN is a compact, low-cost incremental rotary encoder manufactured by Bourns. It is designed for user interface applications requiring precise rotational input, such as volume controls, menu navigation, and position sensing. This encoder provides reliable quadrature output signals and is suitable for through-hole PCB mounting. Its robust mechanical design ensures long operational life and consistent performance in consumer and industrial electronics. Key Features Incremental (relative) rotary encoder Compact, space-saving design Through-hole mounting configuration Quadrature output (A and B channels) Optional integrated push switch (depending on variant) Detent and non-detent options available High reliability with long rotational life RoHS compliant Electrical Characteristics Supply voltage: Typically 5 VDC (logic-level output) Output type: Digital quadrature (A/B signals) Contact resistance: ≤ 100 mΩ Insulation resistance: ≥ 100 MΩ @ 250 VDC Dielectric strength: 300 VAC for 1 minute Mechanical Characteristics Rotation type: Incremental Number of pulses per revolution (PPR): Typically 6 to 24 (variant dependent) Detent positions: Variant dependent Rotational torque: 10 to 70 gf·cm (typical range) Shaft length: Varies by suffix (e.g., 15 mm typical) Shaft type: Knurled or D-cut (variant dependent) Mounting type: Through-hole PCB Terminal type: PC pins Environmental Specifications Operating temperature range: −30°C to +70°C Storage temperature range: −40°C to +85°C Humidity: Up to 85% RH (non-condensing) Mechanical Life Rotational life: Up to 30,000 cycles (typical) Physical Dimensions Body size: Approximately 12 mm × 11 mm × 5 mm (excluding shaft) Shaft diameter: Typically 6 mm Pin pitch: Standard 2.54 mm Applications Consumer electronics (audio controls, appliances) Industrial control panels Embedded systems and microcontroller interfaces Automotive user interfaces Instrumentation and test equipment #commonpartslibrary #connector #header

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) Absolute 10-WFLGA The BMP581 is a high-precision digital barometric pressure sensor designed for altitude tracking, environmental monitoring, navigation, weather sensing, and industrial measurement applications. It integrates a MEMS pressure sensing element with a low-noise analog front end and digital signal processing to deliver highly accurate pressure and temperature measurements over a wide operating range. The device supports low-power operation, making it suitable for portable, battery-powered, and always-on sensing systems. The sensor communicates through standard digital interfaces and includes configurable sampling, filtering, and interrupt features for flexible system integration. Its compact package enables use in space-constrained embedded designs such as wearables, mobile devices, drones, smart home systems, IoT devices, and industrial instrumentation. Engineering Specification Device Type Digital barometric pressure and temperature sensor Manufacturer Bosch Sensortec Pressure Measurement High-resolution absolute pressure measurement with integrated temperature compensation Temperature Measurement Integrated digital temperature sensing for environmental monitoring and pressure compensation Pressure Range Wide atmospheric pressure sensing range suitable for altitude and environmental applications Interface Support I²C and SPI digital communication interfaces Supply Voltage Low-voltage operation optimized for embedded and portable systems Power Consumption Ultra-low power modes with configurable performance and sampling settings Measurement Features Oversampling support with programmable output data rate and internal filtering Accuracy High absolute and relative pressure accuracy for precise altitude estimation and environmental sensing Noise Performance Low-noise sensor architecture for stable pressure readings and improved altitude resolution Interrupt Features Configurable interrupt generation for data-ready and threshold-based events FIFO Support Integrated FIFO buffering for efficient sensor data management Operating Temperature Industrial temperature operating capability for consumer and industrial environments Package Type Compact surface-mount package optimized for small PCB footprint designs Applications Altitude tracking, indoor navigation, weather stations, drones, wearable electronics, IoT sensing, HVAC systems, industrial monitoring, and portable devices #CommonPartsLibrary #Sensor #Transducer #PressureSensor

ARM® Cortex®-M7 S32K3 Microcontroller IC 32-Bit Tri-Core 240MHz 8MB (8M x 8) FLASH 289-LFBGA (14x14) ## Engineering Specification ## General Description The **S32K358GHT1MJBST** is an NXP Semiconductors **S32K3 series automotive microcontroller** designed for high-performance embedded control applications in automotive, industrial, and electrically harsh environments. It is built around an **Arm Cortex-M7 architecture** and provides high processing capability, large embedded flash memory, automotive-grade qualification, security support, and a broad set of communication interfaces. The device is suitable for body control, gateway systems, vehicle networking, motor control, domain control, safety-related embedded systems, and general-purpose automotive electronic control units. ## Device Identification Manufacturer Part Number: **S32K358GHT1MJBST** Manufacturer: **NXP Semiconductors** Product Family: **S32K3** Device Category: **Integrated Circuit** Device Type: **Automotive Microcontroller** Core Architecture: **Arm Cortex-M7** Processing Class: **Thirty-Two-Bit MCU** Qualification: **Automotive Grade, AEC-Q100** ## Functional Description The device functions as a high-performance automotive microcontroller for embedded control and communication systems. It provides processing resources for real-time control, communication management, diagnostics, security handling, and system-level application logic. The microcontroller is designed for scalable automotive platforms where software reuse, safety capability, and peripheral integration are important. ## Core and Processing Description The **S32K358GHT1MJBST** uses an Arm Cortex-M7 based processing architecture with tri-core capability and high-speed operation. The core architecture supports digital signal processing, floating-point operation, interrupt handling, and real-time embedded software execution. This makes the device suitable for control systems that require strong computing performance and deterministic response. ## Memory Description The device includes large embedded flash memory for application firmware storage and integrated RAM for runtime operation, data buffering, communication stacks, and control algorithms. The memory architecture is suitable for complex embedded applications requiring large program space, diagnostics, bootloader support, and over-the-air update capability. ## Security and Safety Description The microcontroller includes hardware security support through **HSE-B security** and is intended for automotive applications where secure boot, cryptographic services, protected firmware operation, and system integrity are important. The S32K3 family also supports automotive safety-oriented development through features such as error correction, monitoring, and diagnostic capability. ## Communication and Interface Description The device supports multiple embedded communication interfaces suitable for vehicle and industrial networks. Supported interface types include CAN, Ethernet, I²C, SPI, UART, LIN, QSPI, SAI, SENT, and FlexIO. These interfaces allow the device to communicate with sensors, actuators, transceivers, memory devices, network controllers, and other electronic control units. ## Analog and Peripheral Description The microcontroller includes analog-to-digital conversion capability, timers, watchdog functions, direct memory access, serial audio support, and general-purpose input and output resources. These peripherals support sensing, control, timing, supervision, communication, and system management functions in embedded hardware designs. ## Electrical Description The device is designed for automotive low-voltage operation and supports use across a wide supply voltage range. It is intended for applications requiring reliable operation in automotive and industrial temperature environments. Proper power supply design, decoupling, reset control, clock configuration, and grounding should follow the manufacturer’s hardware design recommendations. ## Package and Mechanical Description The **S32K358GHT1MJBST** is supplied in a **surface-mount LFBGA package** with a compact ball-grid-array footprint. The package is intended for dense printed circuit board layouts requiring careful routing, controlled assembly process, thermal management, and proper solder joint reliability. ## Mounting and Assembly Description The component is intended for automated surface-mount PCB assembly using BGA-compatible manufacturing processes. PCB layout should follow the recommended footprint, ball escape routing, power-plane design, decoupling capacitor placement, thermal design, and inspection requirements for high-density automotive microcontroller assemblies. ## Application Suitability The device is suitable for automotive electronic control units, body control modules, gateway controllers, vehicle networking systems, motor control platforms, battery-related control systems, industrial controllers, safety-oriented embedded systems, and high-performance general-purpose control applications. ## Design Considerations The design should account for supply voltage range, clocking requirements, flash and RAM usage, thermal limits, package routing density, communication interface requirements, EMC performance, boot configuration, security provisioning, debugging access, software safety requirements, and compliance with automotive design guidelines. The device should not be operated beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #integratedcircuit #microcontroller #automotivemcu #nxp #nxpsemiconductors #s32k3 #s32k358 #s32k358ght1mjbst #armcortexm7 #cortexm7 #thirtytwobit #automotiveelectronics #aecq100 #hsesecurity #canfd #ethernet #vehicleelectronics #embeddedhardware #embeddeddesign #ecu #gatewaycontroller #bodycontrolmodule #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

Buck-Boost Regulator Positive Output Step-Up/Step-Down I2C DC-DC Controller IC 40-VQFN (6x6) The LM51772RHAR is a high-performance multi-phase bidirectional buck-boost controller designed for power conversion systems requiring efficient energy transfer between two voltage domains. The device supports seamless operation in both step-up and step-down modes and is optimized for battery-powered, automotive, industrial, and energy storage applications. The controller enables bidirectional current flow, making it suitable for battery charging, backup power systems, supercapacitor management, and high-power USB Type-C power delivery applications. The device integrates advanced control architecture for high efficiency across a wide operating range while supporting programmable current regulation, voltage regulation, and protection features. Multi-phase capability allows reduced input and output ripple currents, improved thermal distribution, and higher overall power capability. The controller supports external MOSFETs for scalable power design flexibility and includes comprehensive monitoring and fault management functions. The LM51772RHAR is designed for operation in demanding environments with robust protection features including overvoltage protection, undervoltage lockout, cycle-by-cycle current limiting, thermal shutdown, and fault reporting. Its flexible configuration and high integration level reduce external component count and simplify implementation in high-density power systems. Key Features Bidirectional synchronous buck-boost controller architecture Supports power transfer in both forward and reverse directions Multi-phase operation for increased power capability and reduced ripple Wide input and output voltage operating range High-efficiency synchronous control using external MOSFETs Programmable current and voltage regulation Peak and average current control capability Seamless transition between buck, boost, and buck-boost operating modes Integrated current sensing support Programmable switching frequency synchronization Phase interleaving support for thermal and ripple optimization External clock synchronization capability Soft-start and controlled startup sequencing Comprehensive fault detection and protection functions Overcurrent protection and short-circuit protection Overvoltage and undervoltage protection Thermal shutdown protection Fault status reporting and system monitoring support Designed for automotive and industrial power applications Compact thermally enhanced package Typical Applications Bidirectional battery charging systems Energy storage systems Automotive dual-battery architectures USB Type-C Power Delivery systems Backup power and UPS systems Supercapacitor charging and balancing Industrial DC power conversion Renewable energy power management High-power portable electronics Telecom and server power systems Electrical Characteristics Wide operating supply voltage range High switching frequency operation capability High-current multi-phase scalability Precision current regulation accuracy Low standby power consumption High-efficiency synchronous rectification support Programmable dead-time and switching parameters Stable operation across wide temperature range Package Information Package Type: VQFN Package Suffix: RHA Thermally enhanced exposed pad package Surface-mount implementation Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powermanagement #buckboost #dcdcswitchingcontrollers

Accelerometer, Gyroscope, 6 Axis Sensor I2C, I3C, SPI Output The BMI323 is a low-power, high-performance inertial measurement unit developed by Bosch Sensortec. It integrates a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package intended for motion sensing applications requiring precise movement detection, orientation tracking, vibration monitoring, and activity recognition. The device is optimized for wearable electronics, industrial sensing, robotics, navigation systems, IoT devices, and consumer electronics where low power consumption and high motion accuracy are critical. The sensor includes advanced digital signal processing, configurable motion-detection features, programmable interrupts, and integrated FIFO buffering to reduce host processor workload and improve system efficiency. Communication is supported through standard digital interfaces, enabling straightforward integration with microcontrollers and embedded platforms. The BMI323 is designed for robust environmental performance and supports flexible power management modes suitable for battery-operated systems. Engineering Specifications Device Type Six-axis inertial measurement unit consisting of: Three-axis accelerometer Three-axis gyroscope Manufacturer Bosch Sensortec Package Compact LGA surface-mount package suitable for automated assembly processes. Accelerometer Characteristics Supports multiple selectable full-scale measurement ranges for motion and acceleration sensing applications. Provides high-resolution digital output with configurable filtering and sampling parameters for low-noise operation and accurate motion analysis. Gyroscope Characteristics Integrated three-axis angular rate sensor with programmable measurement ranges and digital filtering capabilities. Designed for rotational movement tracking, stabilization, gesture recognition, and inertial navigation applications. Digital Interfaces Supports: I²C serial communication SPI serial communication I3C compatible operation Power Features Designed for ultra-low power operation with multiple configurable power modes to optimize energy consumption for portable and battery-powered devices. Embedded Features Includes integrated: FIFO data buffering Motion detection engine Activity and inactivity detection Tap and gesture detection Orientation and tilt sensing Interrupt generation Self-test functionality Output Data Handling Provides configurable output data rates, oversampling settings, and digital filtering options for balancing performance, bandwidth, and power consumption. Temperature Performance Integrated temperature sensing and compensation support for improved measurement stability across varying environmental conditions. Interrupt System Programmable interrupt outputs support event-driven system architectures and allow efficient host wake-up functionality. Operating Environment Designed for operation across industrial and consumer temperature ranges with stable sensor performance under dynamic motion conditions. Applications Suitable for: Wearable devices Smart watches Fitness trackers Industrial motion monitoring Robotics Drones Navigation systems Gaming controllers AR/VR systems IoT motion sensing Human-machine interfaces #commonpartslibrary #integratedcircuit #accelerometer #sensor

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.5Hz ~ 625Hz 16-LGA (3x3) # LIS3DHTR ## General Description The LIS3DHTR is an ultra-low-power three-axis digital accelerometer manufactured by STMicroelectronics. It is designed to provide accurate motion, orientation, tilt, vibration, and acceleration sensing for a wide range of embedded and portable electronic applications. The device integrates advanced MEMS sensor technology, configurable measurement ranges, embedded motion-detection functions, and digital communication interfaces within a compact surface-mount package. Its low power consumption and high measurement accuracy make it suitable for wearable devices, industrial monitoring systems, asset tracking equipment, smart sensors, consumer electronics, medical devices, Internet of Things products, and battery-powered embedded systems. ## Key Features ### Sensor Architecture * Three-axis digital accelerometer * MEMS sensing technology * High-resolution motion measurement * Multi-axis acceleration detection * Real-time movement monitoring * Precision orientation sensing ### Measurement Capabilities * Motion detection functionality * Tilt sensing capability * Free-fall detection support * Vibration monitoring * Orientation recognition * Impact and shock detection * Activity and inactivity monitoring ### Electrical Characteristics * Ultra-low-power operation * Low current consumption * High measurement stability * Fast response capability * Reliable sensor performance * Optimized for battery-powered systems ### Embedded Processing Features * Integrated interrupt generation * Event detection capability * Motion recognition support * Threshold-based monitoring * Embedded motion-processing functions * Autonomous event reporting ### Communication Interfaces * SPI digital communication interface * I²C digital communication interface * Easy microcontroller integration * Reliable data transfer capability * Flexible system connectivity ### Package Characteristics * Compact surface-mount package * Low-profile design * Automated assembly compatible * High-density PCB layout support * Suitable for space-constrained applications ### Material Construction * Advanced MEMS sensor technology * High-reliability semiconductor integration * RoHS-compliant materials * Lead-free package construction * Industrial-grade manufacturing quality ### Environmental Characteristics * Long operational service life * Reliable operation under industrial conditions * Stable sensor performance over time * Resistant to mechanical stress and vibration * Suitable for continuous monitoring applications ### Application Areas * Wearable Electronics * Internet of Things Devices * Smart Sensors * Asset Tracking Systems * Industrial Monitoring Equipment * Consumer Electronics * Medical Devices * Portable Electronics * Motion Detection Systems * Vibration Monitoring Equipment * Fitness and Activity Tracking Devices * Embedded Control Systems ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade MEMS Motion Sensor Solution ## Manufacturer STMicroelectronics ## Product Family LIS3DH Three-Axis Digital Accelerometer Series #LIS3DHTR #STMicroelectronics #Accelerometer #MEMSSensor #MotionSensor #ThreeAxisAccelerometer #IoT #WearableDevices #EmbeddedSystems #IndustrialMonitoring #AssetTracking #VibrationMonitoring #ConsumerElectronics #ElectronicsEngineering #SensorTechnology

Human Body Sensing Sensor PIR203A-D0 TO-5-3_BD9.1-P2.54_PIR203A-D0 LCSC Part Number: C2887900 JLCPCB Part Class: undefined Manufactured by NEWOPTO(鑫永诚光电)

Temperature Sensor Digital, Local -40°C ~ 125°C 16 b 4-DFN (1.5x1.5) STS40-CD1B-R3 is a high-accuracy digital temperature sensor from Sensirion, designed for precise temperature monitoring in space-constrained and low-power applications. Part of the STS4x series, it features a fully calibrated temperature sensing element with an I²C digital interface, providing reliable measurements over a wide operating temperature range. Its ultra-compact 4-DFN package makes it ideal for IoT devices, wearables, consumer electronics, industrial controls, and battery-powered systems. Key Features High-accuracy temperature measurement (±0.2°C typical at 25°C) Wide operating temperature range: -40°C to +125°C Digital I²C interface for easy MCU integration 16-bit temperature resolution Low operating voltage: 1.08 V to 3.6 V Factory calibrated and linearized output Ultra-small 1.5 mm × 1.5 mm DFN package Low power consumption suitable for battery-powered devices Surface-mount package for automated assembly Robust performance for industrial and consumer applications #STS40 #STS40CD1BR3 #Sensirion #TemperatureSensor #DigitalSensor #I2C #EmbeddedSystems #IoT #IndustrialAutomation #WearableElectronics #EnvironmentalMonitoring #ElectronicsDesign

Six-channel low-side solenoid driver IC from Infineon Technologies. TLE92466EDXUMA1 integrates six constant-current low-side output channels, MOSFET power stages, current sensing, diagnostics, and a protected 32-bit SPI interface for automotive linear solenoid control in transmission, ESC, and active suspension applications. It uses a PG-DSO-36-72 exposed-pad package; per-channel programmed current is up to 1.5 A, dither operation supports up to 1.8 A, and 2.7 A applies to parallel-channel mode. #TLE92466EDXUMA1 #Infineon #AutomotiveIC #SolenoidDriver #CurrentControlIC #TransmissionControl #FunctionalSafety #ISO26262 #AECQ100 #AutomotiveElectronics #PowerManagement #EmbeddedSystems

Pressure Sensor 203.05PSI (1400kPa) Absolute 24 b 8-SMD Module The MS580314BA01-00 is a high-resolution digital absolute pressure sensor module from TE Connectivity Measurement Specialties. It integrates a precision MEMS pressure sensing element, a 24-bit ΔΣ ADC, and factory-calibrated coefficients to provide highly accurate digital pressure and temperature measurements. The sensor supports both I²C and SPI communication interfaces, making it easy to interface with a wide range of microcontrollers while requiring minimal external components. It is designed for low-power, high-accuracy applications such as altimeters, depth measurement systems, weather monitoring, industrial pressure sensing, and portable instrumentation. Key Features Digital absolute pressure sensor with integrated MEMS sensing element High-resolution 24-bit ΔΣ ADC with factory calibration Supports I²C and SPI digital interfaces Pressure range up to 14 bar (1400 kPa / 203 psi) Supply voltage: 1.8 V to 3.6 V Integrated temperature measurement for compensation and monitoring Low power consumption, suitable for battery-powered devices Operating temperature range: −40°C to +85°C Excellent long-term stability with low hysteresis Compact 8-SMD module for surface-mount PCB assembly Requires few or no external components for operation #PressureSensor #MEMS #AbsolutePressure #DigitalSensor #24BitADC #I2C #SPI #LowPower #IndustrialElectronics #Altimeter #DepthMeasurement #WeatherMonitoring #TEConnectivity #SurfaceMount #EmbeddedSystems

Thermal Image Sensor 32H x 24V TO-39 # MLX90640ESF-BAB-000-TU Engineering Specifications **General Description** The MLX90640ESF-BAB-000-TU is a contactless infrared thermal imaging sensor manufactured by Melexis. It incorporates a microbolometer array that detects infrared radiation emitted by objects and converts the captured thermal energy into temperature data, enabling the creation of thermal images without physical contact. The device is designed for compact and cost-effective thermal imaging applications, offering high thermal sensitivity and accurate temperature measurement capabilities. It integrates a digital signal-processing engine, calibration data memory, and a digital communication interface, allowing direct connection to microcontrollers, embedded systems, and industrial monitoring equipment. The sensor provides real-time thermal mapping across its field of view and is suitable for applications involving human presence detection, predictive maintenance, industrial automation, smart building systems, medical screening, consumer electronics, robotics, and thermal monitoring solutions. Its factory calibration ensures stable performance throughout its operating life while minimizing external calibration requirements. **Engineering Specifications** **Manufacturer:** Melexis **Manufacturer Part Number:** MLX90640ESF-BAB-000-TU **Component Type:** Infrared thermal imaging sensor **Sensor Technology:** Microbolometer thermal sensor array **Measurement Method:** Non-contact infrared temperature sensing **Output Type:** Digital thermal image data **Communication Interface:** I²C-compatible serial interface **Temperature Measurement Capability:** Object temperature monitoring and thermal imaging **Thermal Imaging Function:** Real-time thermal map generation **Integrated Processing:** On-chip signal processing and calibration management **Calibration:** Factory calibrated with stored calibration parameters **Power Supply Configuration:** Single-supply operation **Power Consumption:** Optimized for low-power embedded applications **Refresh Rate:** Programmable thermal frame refresh operation **Thermal Sensitivity:** High-sensitivity infrared detection **Field of View Variant:** Wide-angle thermal imaging configuration **Accuracy Characteristics:** High-precision temperature measurement with integrated compensation algorithms **Memory Features:** Internal EEPROM for calibration coefficients **Operating Mode:** Continuous and programmable thermal acquisition **Data Output Format:** Digital temperature and thermal pixel information **Environmental Stability:** Designed for reliable operation across varying ambient conditions **Electromagnetic Compatibility:** Suitable for embedded and industrial electronic systems **Package Type:** Surface-mount package with infrared-transparent window **Mounting Style:** Surface mount technology **Package Construction:** Reflow-solderable assembly **Lead Finish:** Lead-free finish **Environmental Compliance:** RoHS compliant and halogen-free **Reliability Features:** Factory-tested and production-calibrated thermal imaging device **Typical Applications** Thermal cameras Human presence detection systems Occupancy monitoring Industrial predictive maintenance Electrical equipment inspection Smart building automation HVAC monitoring systems Medical screening devices Consumer electronics Robotics and autonomous systems Fire detection and prevention systems Industrial process monitoring Energy management systems Automotive thermal sensing applications Security and surveillance equipment #MLX90640 #MLX90640ESF #Melexis #ThermalSensor #InfraredSensor #ThermalImaging #Microbolometer #TemperatureSensor #IndustrialAutomation #EmbeddedSystems #IoT #PredictiveMaintenance #SmartBuilding #ThermalCamera #ElectronicComponents #EngineeringSpecifications

Current Sense Amplifier 1 Circuit Single-Ended SOT-23-6 The INA187A3IDBVR is a precision high-side and low-side current sense amplifier designed for accurate bidirectional current measurement in power management, motor control, battery monitoring, and industrial sensing applications. The device integrates a matched precision gain stage optimized for shunt resistor voltage amplification while maintaining excellent common-mode rejection and low offset drift. It supports wide common-mode input voltages, enabling current monitoring across supply rails in automotive, industrial, and embedded systems. The amplifier features fast response characteristics, low quiescent current consumption, and a compact surface-mount package suitable for space-constrained designs. Engineering Specification Device Type Precision Current Sense Amplifier Manufacturer Texas Instruments Manufacturer Part Number INA187A3IDBVR Amplifier Configuration Current shunt monitor with fixed gain Gain Variant High fixed gain configuration optimized for low-value shunt resistor sensing Input Measurement Capability Bidirectional current sensing Common-Mode Voltage Range Supports high-side and low-side sensing across wide supply rails Input Offset Characteristics Low offset voltage with low temperature drift for accurate current measurement Bandwidth Performance Wide bandwidth suitable for dynamic load and transient current monitoring Response Time Fast settling and propagation performance for real-time current feedback systems Power Supply Requirements Single-supply operation compatible with low-voltage logic systems Output Type Analog voltage output proportional to sensed shunt voltage Common-Mode Rejection High common-mode rejection ratio for stable operation in noisy environments Temperature Performance Industrial operating temperature range with stable gain accuracy over temperature Protection Features Robust input structure designed for high common-mode environments Package Type SOT-23 surface-mount package Mounting Method Surface mount technology Typical Applications Battery management systems, power distribution monitoring, motor current feedback, DC/DC converter monitoring, industrial automation, telecom power systems, and embedded power diagnostics. #commonpartslibrary #integratedcircuit #currentsenseamplifier