Current Sensor -3.1A ~ 60.9A 1 Channel Hall Effect Bidirectional 10-SOIC (0.295", 7.50mm Width) Hall-effect current sensor providing galvanically isolated AC/DC current measurement with an output voltage proportional to input current. The C3A variant has 75 mV/A sensitivity, a linear measurement range of –3.1 A to 60.9 A, 1 MHz bandwidth, 3 V to 5.5 V supply, 5 kVRMS isolation withstand voltage, and is housed in a 10-pin SOIC (DVG) package. #HallEffectSensor #CurrentSensor #GalvanicIsolation #ACDC #SOIC

SOIC-20W is a 20-pin Small Outline Integrated Circuit (SOIC) package with a wide body size of approximately 7.5mm x 12.8mm and a standard lead pitch of 1.27mm. It has a lead count and pin configuration similar to a DIP-20 package, but with a smaller body size. The "W" in the package name refers to the wide body size. This package is commonly used for ICs such as microcontrollers and audio amplifiers. #part #template

MC33390D is an automotive SAE J1850 Class B single-wire serial transceiver supporting 10.4 kbps VPWM half-duplex communication, 9–16 V operation, and a standard 8-pin SOIC package. Keywords: MC33390D, SAE J1850 transceiver, Class B serial interface, automotive bus, SOIC-8 MC33390

SOIC-24W is a wide-body Small Outline Integrated Circuit (SOIC) package with a body size of approximately 7.5mm x 15.4mm and a lead pitch of 1.27mm. It has 24 pins and a wider body than standard SOIC packages, which allows for easier heat dissipation. The package is commonly used for a wide range of integrated circuits, including microcontrollers, amplifiers, and other digital and analog circuits. SOIC24W, 24-SOICW, #part #template

SOIC-8 is an 8-pin Small Outline Integrated Circuit (SOIC) package with a rectangular 3.9mm x 4.9mm body size and a standard 1.27mm lead pitch. #part #template

SOIC-14 is a 14-pin Small Outline Integrated Circuit (SOIC) package with a rectangular 3.9mm x 8.7mm body size and a standard 1.27mm lead pitch. #part #template

RS-485/RS-422 ICs THVD1450DR SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C2671361 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments THVD14xx family of noise-immune RS-485/RS-422 transceivers, 3V to 5.5V single-supply operation, meets or exceeds TIA/EIA-485A requirements, differential output voltage above 2.1V for PROFIBUS compatibility, ±18kV IEC 61000-4-2 contact ESD protection, ±25kV IEC air-gap ESD, ±30kV HBM ESD, ±4kV IEC EFT protection, ±15V extended common-mode range, low EMI 500kbps and 50Mbps data rate options, open/short/idle bus fail-safe, supports up to 256 bus nodes, -40°C to +125°C operating temperature, available in VSON, VSSOP and SOIC packages. Search Keywords: THVD14xx, Texas Instruments THVD14xx, TI THVD14xx, THVD1410, THVD1450, THVD1451, THVD1452, THVD1410 RS485, THVD1450 RS485, THVD1451 RS485, THVD1452 RS485, RS485 transceiver, RS422 transceiver, 3V to 5.5V RS485 transceiver, IEC ESD protected RS485, 18kV ESD RS485 transceiver, PROFIBUS compatible RS485, 500kbps RS485 transceiver, 50Mbps RS485 transceiver, 256 node RS485 transceiver, THVD14xx VSON, THVD14xx VSSOP, THVD14xx SOIC Hashtags: #THVD14xx #THVD1410 #THVD1450 #THVD1451 #THVD1452 #TexasInstruments #TIRS485 #RS485Transceiver #RS422Transceiver #IndustrialRS485 #ProfibusRS485 #3Vto5VTransceiver #500kbpsRS485 #50MbpsRS485 #IEC6100042 #18kVESDProtection #25kVESDProtection #EFTProtection #FailSafeReceiver #256NodeRS485 #VSON8 #VSSOP8 #SOIC8 #SOIC14

SOIC127P610X323-8N https://componentsearchengine.com/Datasheets/5/SI4459BDY-T1-GE3.pdf VISHAY - SI4459BDY-T1-GE3 - MOSFET, P-CH, -30V, -27.8A, SOIC 3.23 Vishay Si4459BDY-T1-GE3 78-SI4459BDY-T1-GE3 https://www.mouser.co.uk/ProductDetail/Vishay-Semiconductors/SI4459BDY-T1-GE3?qs=lYGu3FyN48dPMSySH5KPIg%3D%3D SI4459BDY-T1-GE3 https://www.arrow.com/en/products/si4459bdy-t1-ge3/vishay?region=asia

Current Sense Amplifier 1 Circuit 8-SOIC The INA240A1D is a precision current-sense amplifier manufactured by Texas Instruments, specifically designed for high-side and low-side current measurement applications in electrically noisy environments. The device features enhanced PWM rejection capability, enabling accurate current sensing in motor control systems, switching power supplies, solenoid drivers, and other fast-switching power electronics applications. The amplifier is optimized for measuring voltage drops across shunt resistors while maintaining high common-mode voltage tolerance and excellent signal accuracy. Its bidirectional current-sensing capability allows monitoring of charging and discharging currents in battery systems and power management circuits. The INA240A1D provides fixed gain amplification and high common-mode transient immunity, making it suitable for industrial automation, automotive electronics, embedded power systems, and precision current monitoring applications. The device combines low offset voltage, low drift characteristics, and robust analog performance within a compact surface-mount package, simplifying precision current measurement implementation in modern electronic systems. Engineering Specification Device Type Current-sense amplifier Amplifier Configuration Precision bidirectional current-shunt monitor Input Characteristics High common-mode voltage sensing capability Gain Configuration Fixed-gain current measurement amplifier Measurement Topology High-side and low-side current sensing support Signal Performance High accuracy with low offset voltage and low drift PWM Rejection Enhanced PWM rejection for switching power applications Common-Mode Performance High common-mode transient immunity Output Characteristics Analog voltage output proportional to sensed current Power Consumption Low-power precision analog operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Protection and Reliability Designed for robust operation in electrically noisy environments Applications Motor control systems Battery management systems Switching power supplies Industrial automation Current monitoring Solenoid control Power inverters Embedded power electronics Automotive current sensing Load measurement systems Manufacturer Texas Instruments #commonpartslibrary #currentsenseamplifier #analogfrontend #powermanagement #texasinstruments #motorcontrol #currentsensing #embeddedhardware #industrialelectronics #analogdesign #surfaceountcomponents #powerelectronics #signalconditioning #batterymanagement #precisionanalog

Authentication Chip 8-UDFN (2x3) The ATECC608B-MAHDA-S is a secure authentication and cryptographic co-processor designed for hardware-based security, device authentication, encrypted communication, and secure key storage in embedded systems and IoT applications. The device integrates advanced cryptographic functionality with protected non-volatile memory to provide a secure root of trust for connected devices. The integrated security engine supports public key cryptography, secure boot validation, message authentication, key generation, digital signatures, and encrypted data exchange. The device is optimized for low-power embedded applications requiring protection against counterfeiting, unauthorized access, firmware tampering, and network-based attacks. The ATECC608B-MAHDA-S supports industry-standard cryptographic algorithms and secure provisioning workflows, enabling secure authentication in cloud-connected systems, industrial automation, consumer electronics, and automotive embedded platforms. The compact surface-mount package and low-power operation make the device suitable for highly integrated embedded designs where hardware security and identity protection are critical requirements. Key Features Hardware-based cryptographic security device Secure key storage and management Integrated authentication engine Public key cryptography support Secure boot and firmware validation capability Digital signature generation and verification Hardware random number generator Encrypted communication support Tamper-resistant key protection Secure provisioning and device identity management Low-power operation for embedded systems I2C serial communication interface Compact surface-mount package IoT and cloud authentication support Electrical Characteristics Secure non-volatile key storage architecture Low operating power consumption Hardware cryptographic acceleration Secure internal key isolation Fast authentication processing capability Wide operating voltage support Industrial temperature operation compatibility High-reliability embedded security implementation Applications IoT device authentication Secure embedded systems Cloud-connected devices Secure boot implementations Firmware integrity verification Industrial automation systems Smart home products Medical electronics Automotive embedded security Asset tracking and identification Anti-counterfeiting systems Encrypted communication platforms Package Information Package Type: SOIC Mounting Type: Surface Mount Compact embedded security package RoHS compliant configuration available #commonpartslibrary #integratedcircuit #securityic #cryptography #iotsecurity #embeddedhardware #authentication #secureboot #hardwaresecurity #encryptedcommunication

ATECC608B-SSHDA-T SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C1518769 JLCPCB Part Class: Extended Part Manufactured by MICROCHIP(美国微芯) Microchip ATECC608B CryptoAuthentication secure element, hardware cryptographic co-processor with secure key storage for up to 16 keys, certificates or data, supports ECDSA, ECDH, NIST P-256, SHA-256, HMAC, AES-128, TLS 1.2/1.3 PRF/HKDF, secure boot, random number generator, unique 72-bit serial number, I2C or single-wire interface, 2.0V to 5.5V supply voltage, <150nA sleep current, available in 8-pad UDFN, 8-lead SOIC and 3-lead contact packages. Search Keywords: ATECC608B, ATECC608B secure element, Microchip ATECC608B, CryptoAuthentication ATECC608B, ATECC608B I2C, ATECC608B secure key storage, ATECC608B cryptographic co-processor, ATECC608B ECDSA, ATECC608B ECDH, ATECC608B AES-128, ATECC608B SHA-256, ATECC608B secure boot, ATECC608B UDFN, ATECC608B SOIC, ATECC608B-MAHDA, ATECC608B-SSHDA Hashtags: #ATECC608B #MicrochipATECC608B #Microchip #CryptoAuthentication #SecureElement #CryptographicCoprocessor #HardwareKeyStorage #SecureKeyStorage #ECDSA #ECDH #NISTP256 #SHA256 #HMAC #AES128 #SecureBoot #TLS13 #TLS12 #I2C #SingleWireInterface #UDFN8 #SOIC8

J-FET Amplifier 4 Circuit 14-SOIC The TL074ACDR is a high-performance JFET-input quad operational amplifier manufactured by Texas Instruments. This integrated circuit contains four independent operational amplifiers optimized for low-noise analog signal processing, high input impedance, and low power consumption. The JFET input stage provides minimal input bias current and excellent signal integrity, making the device suitable for precision analog applications. The TL074ACDR is widely used in audio processing equipment, active filters, signal conditioning circuits, instrumentation systems, industrial electronics, and embedded analog front-end designs. Its high slew rate, wide bandwidth, and low harmonic distortion characteristics make it particularly suitable for audio amplification and high-fidelity analog signal applications. The device supports dual-supply operation and provides stable performance across a broad operating range. Its compact surface-mount package and integrated quad amplifier architecture reduce PCB space requirements and simplify analog circuit implementation in modern electronic systems. Engineering Specification Device Type Quad operational amplifier Amplifier Architecture JFET-input operational amplifier Number of Channels Four independent amplifier channels Input Characteristics High input impedance with low input bias current Signal Performance Low-noise analog signal amplification Bandwidth Characteristics Wide bandwidth suitable for audio and signal conditioning applications Slew Rate Performance High slew rate for fast analog signal response Distortion Characteristics Low harmonic distortion for precision analog applications Supply Configuration Dual-supply analog operation compatibility Output Characteristics Capable of driving standard analog signal loads Power Consumption Low operating power suitable for continuous analog processing Package Type SOIC surface-mount package Mounting Style Surface mount technology Applications Audio amplifiers Signal conditioning Active filters Instrumentation systems Sensor interfaces Industrial electronics Analog front-end circuits Embedded analog systems Data acquisition systems Consumer audio equipment Manufacturer Texas Instruments #commonpartslibrary #operationalamplifier #opamp #quadopamp #analogelectronics #signalconditioning #audioelectronics #texasinstruments #embeddedhardware #analogdesign #surfaceountcomponents #instrumentation #lownoise #jfetamplifier #electronicsdesign

SPI Flash Memory with Dual/Quad SPI The W25Q128JV (128M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down. All devices are offered in space-saving packages. The W25Q128JV array is organized into 65,536 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q128JV has 4,096 erasable sectors and 256 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See Figure 2.) The W25Q128JV supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 and I/O3. SPI clock frequencies of W25Q128JV of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories.  New Family of SpiFlash Memories – W25Q128JV: 128M-bit / 16M-byte – Standard SPI: CLK, /CS, DI, DO – Dual SPI: CLK, /CS, IO0, IO1 – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3 – Software & Hardware Reset(1)  Highest Performance Serial Flash – 133MHz Single, Dual/Quad SPI clocks – 266/532MHz equivalent Dual/Quad SPI – 66MB/S continuous data transfer rate – Min. 100K Program-Erase cycles per sector – More than 20-year data retention  Efficient “Continuous Read” – Continuous Read with 8/16/32/64-Byte Wrap – As few as 8 clocks to address memory – Allows true XIP (execute in place) operation  Low Power, Wide Temperature Range – Single 2.7 to 3.6V supply – <1µA Power-down (typ.) – -40°C to +85°C operating range – -40°C to +105°C operating range Flexible Architecture with 4KB sectors – Uniform Sector/Block Erase (4K/32K/64K-Byte) – Program 1 to 256 byte per programmable page – Erase/Program Suspend & Resume  Advanced Security Features – Software and Hardware Write-Protect – Power Supply Lock-Down – Special OTP protection – Top/Bottom, Complement array protection – Individual Block/Sector array protection – 64-Bit Unique ID for each device – Discoverable Parameters (SFDP) Register – 3X256-Bytes Security Registers with OTP locks – Volatile & Non-volatile Status Register Bits  Space Efficient Packaging – 8-pin SOIC 208-mil – 16-pin SOIC 300-mil (additional /RESET pin) – 8-pad WSON 6x5-mm / 8x6-mm – 24-ball TFBGA 8x6-mm (6x4/5x5 ball array) – 24-ball WLCSP – Contact Winbond for KGD and other options #CommonPartsLibrary #IntegratedCircuit #Memory

FRAM (Ferroelectric RAM) Memory IC 2Mbit SPI 40 MHz 8-SOIC 2-Mbit Serial F-RAM (Ferroelectric RAM) provides nonvolatile data storage organized as 256K × 8 bits and accessed through a high-speed SPI interface supporting up to 40 MHz and SPI modes 0 and 3. It operates from 2.0 V to 3.6 V over an industrial temperature range of −40°C to +85°C and is available in 8-pin SOIC and DFN packages. #F-RAM #SPI #NonvolatileMemory #Infineon

SOP245P670X290-4N https://www.onsemi.com/pub/Collateral/MB8S-D.PDF ON Semiconductor MB8S, Bridge Rectifier, 500mA 800V, 4-Pin SOIC 2.9 onsemi MB8S 512-MB8S https://www.mouser.co.uk/ProductDetail/ON-Semiconductor-Fairchild/MB8S?qs=5V%252BoiEcutOGeoeDaI1GueA%3D%3D MB8S https://www.arrow.com/en/products/mb8s/on-semiconductor?region=nac

FLASH - NOR Memory IC 16Mbit SPI - Quad I/O 133 MHz 8-SOIC Serial NOR Flash Memory that provides non-volatile data storage using a SPI interface. The W25Q16JVSSIQ features 16-Mbit memory density, operates from a 2.7V to 3.6V supply voltage, supports standard SPI, Dual SPI, and Quad SPI interfaces, and provides clock frequencies up to 133 MHz in a 8-pin SOIC package. #FlashMemory #SPIFlash #NORFlash #NonVolatileMemory #Winbond #W25Q16JVSSIQ

Bipolar (BJT) Transistor Array 8 NPN Darlington 50V 500mA Surface Mount 18-SOIC The ULN2803ADW is a high-voltage, high-current Darlington transistor array designed for interfacing low-level digital logic circuits with high-power loads. The device integrates eight NPN Darlington pairs with common-emitter outputs and suppression diodes for inductive load driving. It is commonly used in relay drivers, LED matrix control, solenoid actuation, motor drivers, lamp control, and industrial automation interfaces. The integrated clamp diodes enable direct driving of inductive loads without requiring additional external protection circuitry. The input stage is compatible with standard TTL and CMOS logic levels, making the device suitable for microcontroller, FPGA, and processor-based systems. The ULN2803ADW provides compact multi-channel switching capability in a wide-body SOIC surface-mount package optimized for automated assembly and high-density PCB layouts. Key Features Eight-channel NPN Darlington transistor array High-current sink driver outputs Integrated flyback suppression diodes TTL and CMOS compatible inputs Open-collector outputs Suitable for inductive and resistive loads High output voltage capability Parallel output operation supported for increased current handling Wide operating voltage range Surface-mount SOIC wide-body package Industrial and embedded control application support Electrical Characteristics Darlington transistor output configuration High DC current gain Low input current requirement Common-cathode clamp diode structure Open-collector output topology Logic-level input compatibility High-voltage output tolerance Multi-channel simultaneous switching support Applications Relay and solenoid drivers Stepper motor interfaces LED and lamp driving Industrial automation systems PLC output stages Embedded control systems Printer and actuator control Automotive electronics Logic buffer and level shifting applications Package Information Package Type: SOIC Wide Body Mounting Type: Surface Mount Multi-pin integrated driver package RoHS compliant options available #commonpartslibrary #integratedcircuit #driveric #darlingtonarray #powermanagement #industrialelectronics #embeddedhardware #relaydriver #motorcontrol #automationelectronics

MOSFET DRVR 200V 1.2A 2-OUT Hi/Lo Side Inv/Non-Inv 14-Pin SOIC N Tube #commonpartslibrary #integratedcircuit #audiolinedriver

Op Amp Single High Speed Amplifier ±6V/12V 8-Pin SOIC N Tube #commonpartslibrary #integratedcircuit #linearamplifier #opamp