Single-channel high-side N-channel smart power switch for power distribution, supporting a 6 V to 18 V load voltage and up to 11 A continuous output current. Features 8.8 mΩ typical ON resistance, non-inverting ON/OFF control, and integrated overcurrent, overvoltage, short-circuit, and undervoltage lockout (UVLO) protection. Specified for operation over a −40°C to +150°C junction temperature range and housed in a PG-TSDSO-14-22 (14-pin TSSOP exposed pad) package. #Infineon #BTS70081EPPXUMA1 #SmartPowerSwitch #HighSideSwitch #LoadSwitch #PowerDistribution #PROFET #NChannel #11A #PowerManagement #AutomotiveElectronics #TSDSO14

Solid State Photo-Coupled Relay (Photorelay) SPST-NO (1 Form A) 4-SOP (0.179", 4.55mm) The G3VM-61VY3(TR05) is a single-pole, single-throw normally open (SPST-NO) solid-state relay that uses an LED input and MOSFET output to switch AC or DC loads without mechanical contacts. It provides fast, silent, and highly reliable switching in a very small surface-mount package. Key Characteristics Relay Type: Solid State Relay (Photorelay) Contact Form: SPST-NO (1 Form A) Output Type: MOSFET Load Voltage: Up to 60 V AC/DC Load Current: Up to 700 mA On-Resistance: ~2 Ω max Input Control: LED-driven (low current DC input) Isolation Voltage: ~3.75 kV (input to output) Package: SOP-4 surface-mount (compact form factor) Packaging Option: TR = Tape & Reel for automated assembly How It Works The input LED is energized with a small DC current. It activates an internal photo-coupler. This drives a pair of MOSFETs, turning the load ON or OFF. No mechanical movement → no arcing or contact wear. Key Advantages Silent operation (no clicking sound) Very long life (no mechanical parts) Fast switching speed Compact size for dense PCB layouts Low leakage and stable performance Typical Applications Semiconductor test equipment Industrial control systems Battery-powered devices Data acquisition systems Communication and measurement circuits General-purpose signal switching #CommonPartsLibrary #Relay #SSR #G3VM

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower

-2.3A, 20V Vds, Integrated load switch, P-Channel MOSFET driven by small N-Channel MOSFET, TSOT-23-6 complementary mosfet TSOT?23*

Power Switch/Driver 1:1 N-Channel 3.8A 6-WQFN-HR (1.5x0.75) The TPS22995RZGR is a high-current, low ON-resistance load switch designed for power distribution and power sequencing applications. It features an integrated N-channel MOSFET capable of handling high load currents while maintaining minimal voltage drop. The device includes controlled rise time to reduce inrush current, making it suitable for sensitive power rails and battery-powered systems. It also integrates thermal shutdown and overcurrent protection, ensuring safe operation under fault conditions. Its compact package and low quiescent current make it ideal for portable and space-constrained designs. Key Features Ultra-low ON-resistance (R_ON) Wide input voltage range High continuous output current capability Controlled slew rate for inrush current limiting Low quiescent current Thermal shutdown protection Reverse current blocking (when disabled) Active high enable pin (ON pin) Compact WQFN package Electrical Characteristics Input Voltage Range: 0.5 V to 5.5 V ON-Resistance (R_ON): Typically ~5 mΩ (VIN = 5 V) Continuous Output Current: Up to 6 A (typical, PCB dependent) Quiescent Current: Typically < 10 µA Shutdown Current: Typically < 1 µA Enable Threshold Voltage: ~0.9 V (typical) Functional Description The TPS22995RZGR operates as a load switch that connects or disconnects a power supply to a load using an internal MOSFET controlled by an enable (ON) pin. When the ON pin is asserted high, the device turns on with a controlled rise time, limiting inrush current. When disabled, the switch turns off quickly and prevents reverse current flow from the output to the input. Integrated protection features such as thermal shutdown ensure reliability during abnormal operating conditions. Absolute Maximum Ratings Input Voltage (VIN): -0.3 V to 6 V ON Pin Voltage: -0.3 V to 6 V Output Voltage (VOUT): -0.3 V to VIN + 0.3 V Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Package Information Package Type: WQFN (RZG) Package Size: 3 mm × 3 mm Mounting Type: Surface Mount Pin Count: 12 Applications Power rail switching Portable electronics USB power distribution Solid-state drives (SSD) Battery-powered systems Embedded systems power management Advantages Minimizes power loss due to low R_ON Reduces system inrush current Enhances system reliability with built-in protections Suitable for high-current, compact designs #commonpartslibrary #integratedcircuit #powermanagement

24 MHz ±20ppm Crystal 18pF 60 Ohms 4-SMD, No Lead The ABM8G-24.000MHZ-18-D2Y-T is a compact 24.000 MHz surface-mount quartz crystal from Abracon's ABM8G series, designed to provide a stable and accurate clock reference for digital electronic systems. Housed in a miniature 3.2 × 2.5 mm, 4-pad SMD package, it is optimized for space-constrained applications while delivering reliable frequency performance over a wide operating temperature range. This crystal is commonly used in microcontrollers, wireless modules, communication equipment, networking devices, industrial electronics, and precision timing circuits. It operates in the fundamental mode with an 18 pF load capacitance, making it suitable for a broad range of oscillator circuits. Key Features 24.000 MHz fundamental-mode quartz crystal Compact 3.2 × 2.5 × 1.0 mm 4-pad SMD package 18 pF load capacitance ±20 ppm frequency tolerance ±30 ppm frequency stability Maximum 60 Ω ESR Wide operating temperature range: −40°C to +85°C Glass-sealed ceramic package for high reliability Compatible with standard IR reflow soldering processes Low-profile design suitable for compact PCB layouts Ideal for embedded systems, communications, wireless devices, and clock generation applications. #Abracon #QuartzCrystal #24MHz #ABM8G #SMDCrystal #TimingDevice #ClockSource #EmbeddedSystems #WirelessElectronics #IndustrialElectronics #PCBDesign #ElectronicsComponents

OR Controller N+1 ORing Controller N-Channel N:1 8-VSSOP The LM74610QDGKRQ1 is an automotive-qualified smart bypass ideal diode controller designed to drive an external N-channel MOSFET for reverse polarity protection and input supply OR-ing applications. The device minimizes forward voltage drop and power dissipation compared to traditional Schottky diodes while providing robust protection against reverse battery conditions. It supports operation across a wide automotive input voltage range and is optimized for high-current systems requiring low standby current, fast response, and reliable transient handling. The device is AEC-Q100 qualified for automotive applications and is commonly used in ECU power distribution, battery protection, and redundant supply systems. Engineering Specification Manufacturer: Texas Instruments Manufacturer Part Number: LM74610QDGKRQ1 Device Type: Automotive Smart Diode Controller Qualification Standard: AEC-Q100 Automotive Qualified Functionality: Reverse polarity protection and ideal diode control using external N-channel MOSFET Topology: Charge pump driven ideal diode controller Input Operating Voltage Range: Wide automotive battery operating range with load dump capability support Reverse Input Protection: Supports reverse battery protection without requiring a reverse polarity diode Gate Drive Method: Integrated charge pump for external N-channel MOSFET enhancement Forward Voltage Drop: Determined primarily by external MOSFET RDS(on) Quiescent Current: Ultra-low operating current for always-on automotive systems Transient Immunity: Automotive load dump and ISO transient tolerant design MOSFET Compatibility: External N-channel MOSFET Response Time: Fast reverse current blocking response Operating Temperature Range: Automotive extended temperature range Package Type: VSSOP Package Size: 8-pin small-outline package Mounting Type: Surface mount #Commonpartslibrary #Integratedcircuit #Powermanagement #orcontrollers

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL345

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

LM3671 3.3V Buck Converter Breakout - 3.3V Output 600mA Max. Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power. This chip provides up to 600-mA load current across the entire input voltage range of 3.5 to 5.5V. Great for your portable project, we made this "pin compatible" with the LM1117-3.3V TO-220 chip so you can swap it in for better performance (90-95% efficiency!) There's also an ENable pin, tie it low to shut down the output completely.

16 MHz ±15ppm Crystal 8pF 60 Ohms 4-SMD, No Lead The CX3225SB16000D0GZJC1, manufactured by Kyocera AVX, is a 16.000 MHz crystal oscillator element designed to provide precise frequency reference for microcontrollers, communication ICs, and digital systems. It belongs to the CX3225SB series, known for compact size and stable frequency performance. Key Characteristics Type: Quartz crystal (passive frequency component) Frequency: 16 MHz Load Capacitance: 8 pF Frequency Stability: ±15 ppm Frequency Tolerance: ±15 ppm Operating Mode: Fundamental ESR (Equivalent Series Resistance): ~60–80 Ω Mechanical Details Package: 4-SMD, no-lead (surface mount) Size: 3.2 mm × 2.5 mm (3225 package) Height: ~0.6 mm (low profile) Operating Conditions Temperature Range: −25°C to +85°C Mounting Type: Surface mount (SMT) Function (Simple Explanation) This component: Generates a stable clock signal (16 MHz) Acts as the timing reference for MCUs, processors, or RF modules Works together with internal oscillator circuits inside ICs Microcontroller clock sources (e.g., ESP32, STM32, AVR) Communication modules Embedded systems Consumer electronics IoT devices #CommonPartsLibrary #Crystal #Oscillator #resonator

Electronic Fuse Regulator High-Side 10A 10-VQFN-HR (2x2) The TPS25981xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges and excessive inrush current. Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current (during startup) or breaking the circuit (during steady-state). The overcurrent protection threshold as well as the transient overcurrent blanking timer are useradjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2-mm × 2-mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range of –40°C to +125°C. • Wide operating input voltage range: 2.7 V to 16 V – 20-V absolute maximum • Integrated FET with low on-resistance: RON = 6 mΩ (typ.) • Fast overvoltage protection – Adjustable overvoltage lockout (OVLO) with 1.2-μs (typ.) response time • Overcurrent protection with load current monitor output (ILM) – Circuit-breaker response – Adjustable threshold (ILIM) 1.5 A – 11 A • ±10% accuracy for ILIM > 5 A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±10% (IOUT ≥ 3 A) • Fast-trip response for short-circuit protection – 640-ns (typ.) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Active low enable input with adjustable undervoltage lockout threshold (OVLO) • Adjustable output slew rate control (dVdt) • Option to drive external FET for reverse current blocking in disabled/OFF state • Overtemperature protection • Quick Output Discharge • Digital outputs – Power Good (PG) and fault indication (FLT) • UL 2367 recognition (pending) • IEC 62368 CB certification (pending) • Small footprint: QFN 2-mm × 2-mm, 0.45-mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

The TPS54331 device is a 28-V, 3-A nonsynchronous buck converter that integrates a low RDS(on) high-side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode feature is automatically activated. Furthermore, the 1-μA shutdown supply-current allows the device to be used in battery-powered applications. Current mode control with internal slope compensation simplifies the external compensation calculations and reduces component count while allowing the use of ceramic output capacitors. A resistor divider programs the hysteresis of the input undervoltage lockout. An overvoltage transient protection circuit limits voltage overshoots during start-up and transient conditions. A cycle-by-cycle current-limit scheme, frequency foldback and thermal shutdown protect the device and the load in the event of an overload condition. The TPS54331 device is available in an 8-pin SOIC package and 8-pin SO PowerPAD integrated circuit package that have been internally optimized to improve thermal performance. • 3.5 to 28-V input voltage range • Adjustable output voltage down to 0.8 V • Integrated 80-mΩ high-side MOSFET supports up to 3-A continuous output current • High efficiency at light loads with a pulse skipping Eco-mode • Fixed 570-kHz switching frequency • Typical 1-μA shutdown quiescent current • Adjustable slow-start limits inrush currents • Programmable UVLO threshold • Overvoltage transient protection • Cycle-by-cycle current limit, frequency foldback, and thermal shutdown protection • Available in easy-to-use SOIC8 package or thermally-enhanced SOIC8 PowerPAD™ integrated circuit package • Create a custom design using the TPS54331 with the WEBENCH® Power Designer • Use TPS62933 for a 30 VIN converter with higher frequency, lower IQ and improved EMI #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a switch-mode synchronous buck-boost charger with full power-path management. It can automatically regulate power flow between the input source, system load, and battery. It supports a wide input range and is designed for USB Type-C™ / USB Power Delivery (USB-PD) systems, enabling both charging and OTG (power output from battery) operation. ⭐ Key Features ⚡ High-performance charging Up to 5 A charge current Supports 1S to 4S battery packs High efficiency (up to ~96% under typical conditions) Programmable switching frequency: 750 kHz or 1.5 MHz 🔋 Wide input support Input voltage range: 3.6 V to 24 V Absolute max rating up to 30 V Supports USB adapters and barrel jack sources Detects USB charging standards (BC1.2, DCP, CDP, HVDCP, etc.) 🔄 Buck-boost power conversion Seamless buck, boost, and buck-boost operation Maintains stable system voltage even when battery is low or input varies 🔌 USB-PD / OTG support USB Power Delivery (PD 3.0 compatible) Supports OTG output (battery powers USB port) OTG voltage range: 2.8 V to 22 V 🧠 Intelligent power management NVDC power path management (system can run without battery) Dual-input power mux controller (select between two power sources) Battery supplement mode (prevents input overload) 📊 Monitoring & control Integrated 16-bit ADC for voltage, current, temperature monitoring Fully I²C configurable Autonomous or host-controlled operation 🛡️ Protection & safety Input and battery over-voltage/over-current protection Thermal regulation and shutdown Charging safety timer MOSFET protection (internal switching FETs included) 📦 Package 29-pin VQFN (4 mm × 4 mm) package Industrial temperature range: -40°C to 85°C #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-charger

IXYS Integrated Circuits brings OptoMOS® technology, reliability and compact size to a new family of high-power Solid State Relays. As part of this family, the CPC1709J single-pole normally open (1-Form-A) DC Solid State Power Relay employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The output, constructed with an efficient MOSFET switch and photovoltaic die, uses IXYS Integrated Circuits’ patented OptoMOS architecture while the input, a highly efficient infrared LED, provides the optically coupled control. The combination of low on-resistance and high load current handling capability makes this relay suitable for a variety of high performance DC switching applications. The unique ISOPLUS-264 package pioneered by IXYS enables Solid State Relays to achieve the highest load current and power ratings. This package features a unique IXYS process where the silicon chips are soft soldered onto the Direct Copper Bond (DCB) substrate instead of the traditional copper leadframe. The DCB ceramic, the same substrate used in high power modules, not only provides 2500Vrms isolation but also very low junction-to-case thermal impedance (0.3 °C/W). Features • 22.8ADC Load Current with 5°C/W Heat Sink • Low 0.05 On-Resistance • 60VP Blocking Voltage • 2500Vrms Input/Output Isolation • Low Thermal Impedance: JC = 0.3 °C/W • Isolated, Low Thermal Impedance Ceramic Pad for Heat Sink Applications • Low Drive Power Requirements • No EMI/RFI Generation Applications • Industrial Controls / Motor Control • Robotics • Medical Equipment—Patient/Equipment Isolation • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Transportation Equipment #CPC1709J #IXYS #Littelfuse #SolidStateRelay #SSR #OptoMOS #PowerRelay #DCRelay #MOSFETRelay #HighCurrentSwitching #ElectricalIsolation #IndustrialElectronics #PowerManagement #BatterySystems #AutomationControl

Buck Regulator Positive Output Step-Down DC-DC Controller IC 24-VQFN (3.5x5.5) The LM5148RGYR specification defines the engineering requirements for a synchronous buck controller integrated circuit designed for high-efficiency DC-DC power conversion applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure reliable voltage regulation, efficient power management, and long-term operational stability in industrial, automotive, telecommunications, and embedded electronic systems. The device is intended for use in high-performance power supply designs requiring wide input voltage capability, precise output voltage regulation, and high-current conversion efficiency. It controls external power MOSFETs to implement synchronous buck converter topologies suitable for distributed power architectures, industrial automation equipment, networking infrastructure, battery-powered systems, and embedded control applications. Engineering Requirements The controller shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure stable switching performance, low power consumption, and reliable long-term operation. The device shall maintain consistent functionality under specified operating voltage, temperature, and environmental conditions. Electrical characteristics shall provide accurate pulse-width modulation control, stable output voltage regulation, fast transient response, and reliable gate drive capability for external synchronous power MOSFETs. The controller shall maintain predictable switching performance during startup, shutdown, overload, and dynamic load conditions while supporting efficient power conversion. The integrated control architecture shall provide robust regulation, protection features, and compensation capability to ensure stable converter operation across varying input voltages and output load conditions. The device shall maintain operational integrity during power sequencing and fault recovery without compromising system reliability. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical performance and reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of functionality. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect electrical or mechanical performance. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, application guidelines, thermal characterization reports, qualification records, inspection reports, material declarations, reliability data, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #BuckController #DCDCConverter #PowerManagement #SynchronousBuck #PowerElectronics #EmbeddedSystems #IndustrialElectronics #QualityAssurance #EngineeringDocumentation

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075RGTR is a standalone linear charger and power-path management integrated circuit developed by Texas Instruments for single-cell lithium-ion and lithium-polymer battery applications. The device is designed for portable and space-constrained electronic systems requiring efficient battery charging, USB compatibility, and simultaneous system power delivery. The integrated dynamic power-path management architecture enables the system load to be powered while independently charging the battery. The charger supports operation from either a USB power source or an external adapter and includes programmable charging and input current limiting functions for optimized power management. The device incorporates multiple protection and monitoring features including thermal regulation, overvoltage protection, reverse current protection, battery temperature monitoring, and safety timers. The BQ24075RGTR also provides battery disconnect capability through the SYSOFF control function, making it suitable for low-power and portable embedded designs. Typical applications include portable consumer electronics, handheld instruments, wearable devices, wireless accessories, battery-powered IoT equipment, medical portable systems, and embedded rechargeable products. Device Features Standalone single-cell lithium-ion and lithium-polymer battery charger Integrated power-path management architecture Simultaneous battery charging and system power support USB-compatible input current limiting Programmable fast-charge current capability Dynamic power management for unstable or limited input sources Battery temperature monitoring through external thermistor input Integrated thermal regulation and protection mechanisms Reverse current, short-circuit, and input overvoltage protection Programmable safety timers for pre-charge and fast-charge modes Charging status and power-good indication outputs Battery disconnect functionality through SYSOFF control Compact surface-mount VQFN package implementation Electrical Characteristics Designed for single-cell lithium-ion or lithium-polymer batteries Fixed battery regulation voltage suitable for standard single-cell charging Supports USB and external adapter input operation Linear charging topology Wide operating temperature range for portable and industrial applications Programmable input current limit for USB compliance and adapter compatibility Package Information Package Type: VQFN Pin Configuration: Sixteen-pin package Mounting Style: Surface mount Package Dimensions: Compact three-millimeter square footprint Functional Overview The BQ24075RGTR manages power distribution between the external input source, the system load, and the rechargeable battery. When external power is present, the device prioritizes powering the system while charging the battery according to programmable charging parameters. Dynamic power management prevents excessive loading of weak USB or adapter sources by automatically reducing charging current when necessary. Thermal regulation circuitry continuously monitors device temperature and adjusts charging operation to maintain safe operating conditions. Additional integrated protection functions ensure reliable operation during fault conditions such as input overvoltage, battery temperature abnormalities, reverse current flow, and output short circuits. #commonpartslibrary #integratedcircuit #powermanagement

Tactile Switches 3.4x2.9mm 2.4N 0.15mm Travel IP67,10uA 2V DC to 20mA 15V DC (Resistive load) #CommonPartsLibrary #switch #EVPAY #EVP-AY

Battery Battery Monitor IC Lithium Ion 9-DSBGA The BQ27220YZFR is a highly integrated single-cell battery fuel gauge IC developed for rechargeable lithium-ion and lithium-polymer battery applications. The device utilizes Texas Instruments’ Impedance Track™ algorithm to provide highly accurate battery capacity measurement, state-of-charge estimation, runtime prediction, and battery health monitoring across varying load and temperature conditions. The device is designed for compact portable electronics, wearable devices, IoT products, handheld instruments, and low-power embedded systems requiring precise battery monitoring and extended operating life. The BQ27220YZFR supports system-side fuel gauging without requiring battery pack-side electronics, simplifying battery integration and reducing overall system cost. The fuel gauge continuously monitors battery voltage, current, and temperature to estimate available capacity, remaining runtime, full charge capacity, and state-of-health information. Integrated low-power operation enables ultra-low standby current consumption suitable for always-on battery-powered products. Communication with the host processor is implemented through a standard I²C interface, allowing configuration access, telemetry reporting, and battery parameter monitoring. The device also integrates protection and alert functionality through programmable interrupt outputs and battery condition monitoring features. The BQ27220YZFR is optimized for use with single-cell lithium-based chemistries and supports learning cycles for adaptive battery characterization over product lifetime. Internal data flash memory stores battery profile information and calibration parameters to improve long-term gauging accuracy. The device is supplied in a compact lead-free wafer chip-scale package suitable for space-constrained PCB designs and portable electronics requiring minimal footprint and low-profile assembly. Electrical Characteristics Device Type Single-cell battery fuel gauge and battery monitor IC Battery Chemistry Support Lithium-ion and lithium-polymer rechargeable batteries Input Voltage Range Supports single-cell battery operation Fuel Gauging Method Impedance Track™ algorithm Communication Interface I²C serial interface Measurement Functions Battery voltage monitoring Battery current monitoring Battery temperature monitoring State-of-charge estimation Remaining capacity calculation Full charge capacity estimation State-of-health reporting Runtime prediction Power Consumption Ultra-low operating current for portable applications Temperature Monitoring External thermistor support Host Alert Features Interrupt and alert reporting capability Data Storage Integrated nonvolatile configuration memory Calibration Features Automatic learning and battery characterization support Protection Monitoring Battery condition and system monitoring functions Package Type DSBGA wafer chip-scale package Mounting Style Surface mount Operating Temperature Range Industrial temperature operation suitable for portable electronics Functional Features High-accuracy fuel gauging over battery lifetime Adaptive battery modeling and aging compensation Low-power operation for battery-powered systems Integrated battery profiling capability Real-time remaining runtime estimation Automatic battery learning cycles Compact PCB footprint for portable devices System-side implementation without smart battery pack requirement Programmable battery alert functionality Support for low-power embedded processors and mobile systems Optimized for wearable and IoT applications RoHS compliant and lead-free package construction #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement

Ultrahigh Precision Adjustable Current Limited Load Switch with Fault Flag Active Low SOT23-5 #Commonpartslibrary #Integratedcircuit #Powermanagement

Buck Switching Regulator IC Positive Adjustable 2.5V 1 Output 1A 14-PowerTSSOP (0.173", 4.40mm Width) The LM5010 step-down switching regulator features all the functions needed to implement a low-cost, efficient, buck bias regulator capable of supplying in excess of 1-A load current. This high-voltage regulator contains an N-Channel Buck Switch, and is available in thermally enhanced 10-pin WSON and 14-pin HTSSOP packages. The hysteretic regulation scheme requires no loop compensation, resulting in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load variations due to the inverse relationship between the input voltage and the ON-time. The valley current limit detection is set at 1.25 A. Additional features include: VCC undervoltage lockout, thermal shutdown, gate drive undervoltage lockout, and maximum duty cycle limiter Features 1• Input Voltage Range: 8 V to 75 V • Valley Current Limit At 1.25 A • Switching Frequency Can Exceed 1 MHz • Integrated N-Channel Buck Switch • Integrated Start-Up Regulator • No Loop Compensation Required • Ultra-Fast Transient Response • Operating Frequency Remains Constant With Load and Line Variations • Maximum Duty Cycle Limited During Start-Up • Adjustable Output Voltage • Precision 2.5-V Feedback Reference • Thermal Shutdown • Exposed Thermal Pad for Improved Heat Dissipation 2 Applications • High Efficiency Point-of-Load (POL) Regulator • Non-Isolated Telecommunications Buck Regulator • Secondary High Voltage Post Regulator • Automotive Systems #TexasInstruments #LM5010MHXNOPB #BuckRegulator #DCDCConverter #SwitchingRegulator #PowerManagement #HighVoltage #StepDownConverter #IndustrialElectronics #EmbeddedSystems #PowerSupplyDesign #HTSSOP14 #PMIC #ElectronicsDesign #VoltageRegulator