Single channel 24-bit Analog to Digital Converter, 5V supply, differential input, 20kHz, 2-wire serial interface, SOIC-8 delta-sigma adc low-power SOIC*

Stereo, 96 kHz, Multibit Sigma-Delta DAC, SSOP-28 audio dac 2ch 24bit 96kHz SSOP*5.3x10.2mm*P0.65mm*

High Performance Multibit Sigma-Delta DAC with SACD Playback, SSOP-28 audio dac 2ch 24bit 192kHz SSOP*5.3x10.2mm*P0.65mm*

Stereo, 24-Bit, 192 kHz, Multibit Sigma-Delta DAC, SSOP-28 audio dac 2ch 24bit 192kHz SSOP*5.3x10.2mm*P0.65mm*

24-Bit, 96kHz Stereo D/A Converter, SOIC-8 stereo 2ch audio codec i2s 24bit 96kHz SOIC*3.9x4.9mm*P1.27mm*

24-Bit, 192-kHz Sampling, Advanced Segment, Audio Stereo Digital-to-Analog Converter, SW Control, SSOP-28 audio dac 2ch 24bit 192kHz SSOP*5.3x10.2mm*P0.65mm*

24-Bit, 192-kHz Stereo Audio CODEC, TSSOP-24 Audio Codec TSSOP*4.4x7.8mm*P0.65mm*

24-Bit, 6-Channel Sigma-Delta ADC, TSSOP-28 adc 6ch 24bit serial TSSOP*4.4x7.8mm*P0.65mm*

24-bit capacitance-to-digital converter with temperature sensor, TSSOP-16 adc cdc capacitance TSSOP*4.4x5mm*P0.65mm*

Digital MEMS Barometric Pressure Sensor – Ultra-compact absolute MEMS barometric pressure sensor with an integrated temperature sensor and 24-bit digital output for altimeters, weather stations, GPS, drones, wearables, industrial monitoring, and IoT applications. Operates from a 1.7 V to 3.6 V supply, measures 260 hPa to 1260 hPa (26 kPa to 126 kPa) absolute pressure with ±0.5 hPa absolute accuracy, and communicates via I²C, SPI, or MIPI I3C℠ interfaces. Features low power consumption (4 µA typical at 1 Hz), embedded temperature compensation, 24-bit pressure output, integrated FIFO, programmable output data rates from 1 Hz to 200 Hz, interrupt generation, and 22,000 g shock survivability. Specified for operation over a −40°C to +85°C temperature range and housed in a 10-pin HLGA (2.0 × 2.0 × 0.73 mm) surface-mount package. #STMicroelectronics #LPS22HHTR #MEMSSensor #PressureSensor #Barometer #DigitalPressureSensor #TemperatureSensor #I2C #SPI #I3C #WeatherStation #Altimeter #EmbeddedSystems

USB-A (USB TYPE-A) USB 2.0 Receptacle Connector 4 Position Through Hole, Right Angle The ADS1256IDBT is a high-precision, low-noise, 24-bit analog-to-digital converter manufactured by Texas Instruments. It is designed for high-resolution measurement applications requiring exceptional accuracy, low drift, and programmable data rates. The device integrates a low-noise programmable gain amplifier, a precision delta-sigma ADC core, and a flexible multiplexer that supports multiple differential or single-ended analog inputs. The converter is optimized for industrial process control, sensor measurement, weigh scales, data acquisition systems, temperature monitoring, and portable instrumentation. Its integrated digital filtering and selectable gain settings enable direct interfacing with low-level sensors such as strain gauges, thermocouples, RTDs, and bridge sensors without requiring extensive external signal conditioning. The ADS1256IDBT supports SPI-compatible serial communication and operates with low power consumption while maintaining excellent dynamic performance and high effective resolution. The device provides programmable output data rates suitable for both low-speed precision measurements and higher-speed acquisition systems. Device Features 24-bit delta-sigma analog-to-digital converter Low-noise programmable gain amplifier Eight single-ended or four differential analog input channels Programmable gain settings from 1 to 64 Programmable data output rates SPI-compatible serial interface Integrated digital filter for noise reduction Low offset drift and gain drift Internal oscillator support Sensor burnout detection capability Self-calibration and system calibration functions Low power operation Wide analog supply voltage range Excellent 50 Hz and 60 Hz rejection performance Electrical Characteristics Resolution of 24 bits Maximum data rate up to 30 kSPS Differential input architecture Input multiplexer for multi-channel acquisition Low RMS noise performance High common-mode rejection ratio High power-supply rejection ratio Programmable gain amplifier integrated on-chip Internal reference support with external reference capability Interface and Control SPI-compatible digital communication interface Configurable control registers Read and write register functionality Synchronization and standby control support Hardware reset capability Interrupt and data-ready signaling support Package Information Manufacturer package designation: DBT Package type: TSSOP Surface-mount device Fine-pitch lead configuration Industrial temperature grade device Applications Precision data acquisition systems Industrial automation and control Weigh scales and bridge sensors Temperature measurement systems Pressure sensing applications Portable instrumentation Medical instrumentation Laboratory measurement equipment Energy monitoring systems Process monitoring and control Manufacturer Information Manufacturer: Texas Instruments Manufacturer Part Number: ADS1256IDBT Product Category: Precision Analog-to-Digital Converter RoHS compliant device #commonpartslibrary #integratedcircuit #analog #adc #deltasigma #precisionadc #sensorinterface #dataacquisition #industrialautomation #instrumentation #signalconditioning #texasinstruments #spiinterface #mixedsignal #measurementsystems

ADS1220IPW is a Texas Instruments 24-bit, 2 kSPS, low-power 4-channel delta-sigma ADC with integrated PGA, 2.048 V reference, oscillator, temperature sensor, SPI interface, and two programmable IDACs, supplied in a 16-pin TSSOP (PW) package for 2.3 V to 5.5 V operation. Tags: 24-bit ADC, delta-sigma, SPI ADC, 4-channel ADC, TSSOP-16

Precision low-power 24-bit sigma-delta ADC with PGA and 2-wire I2C-compatible interface for bridge sensors.

60 Hz ~ 20 kHz Digital, I²S Microphone MEMS (Silicon) 1.65V ~ 3.63V Omnidirectional (-26 ±1dB @ 94dB SPL) Solder Pads MEMS Digital Microphone providing high-performance audio capture with a 24-bit I²S digital output. It operates from a 1.62 V to 3.63 V supply, features 65 dBA SNR, 120 dB SPL acoustic overload point, -26 dBFS sensitivity, and supports audio sampling rates from 23.3 kHz to 51.6 kHz. Packaged in a compact 3.50 × 2.65 × 0.98 mm surface-mount package. #MEMSMicrophone #DigitalMicrophone #I2S #24Bit #AudioSensor #TDKInvenSense #SurfaceMount #commonpartslibrary #audio #microphone #digital

TDK InvenSense MEMS Microphone, 24-bit I2S, 65 dBA SNR, LGA-6 microphone MEMS 24bit I2S ICS-43434 TDK InvenSense InvenSense*ICS*43434*

24bit 2ch ADC + 24bit 4ch DAC with Audio DSP, LQFP-48 audio adc 2ch dac 4ch dsp LQFP*7x7mm*P0.5mm*

24bit 2ch ADC + 24bit 4ch DAC with Audio DSP, LQFP-48 #Audio #commonpartslibrary