Automotive CAN FD Transceiver – High-speed CAN FD transceiver compliant with ISO 11898-2:2016 for automotive ECUs, body electronics, industrial automation, motor control, battery management systems (BMS), and embedded communication networks. Supports Classical CAN and CAN FD communication with data rates up to 8 Mbps, operating from a 4.5 V to 5.5 V supply. Features standby mode with ultra-low power consumption, ±58 V bus fault protection, TXD dominant timeout, thermal shutdown, undervoltage protection, 100 mV receiver hysteresis, and failsafe operation for robust and reliable CAN communication. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C junction temperature range and is housed in a standard 8-pin SOIC package. Unlike the TCAN1462VDRBRQ1, this version does not include Signal Improvement Capability (SIC), making it suitable for conventional CAN/CAN FD networks. #TexasInstruments #TCAN1462VDRQ1 #TCAN1462Q1 #CANFD #CANTransceiver #AutomotiveElectronics #IndustrialCommunication #BatteryManagement #AECQ100 #SOIC8 #EmbeddedSystems

1/1 Transceiver Half RS422, RS485 8-SOIC These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to Human-Body Model and IEC Contact Discharge specifications. Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. These devices feature a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs. These devices are characterized from –40°C to 125°C 1• Small-size VSSOP Packages Save Board Space, or SOIC for Drop-in Compatibility • Bus I/O Protection – >±15 kV HBM Protection – >±12 kV IEC 61000-4-2 Contact Discharge – >±4 kV IEC 61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range –40°C to 125°C • Large Receiver Hysteresis (80 mV) for Noise Rejection • Low Unit-Loading Allows Over 200 Connected Nodes • Low Power Consumption – Low Standby Supply Current: < 2 µA – ICC < 1 mA Quiescent During Operation • 5-V Tolerant Logic Inputs Compatible With 3.3-V or 5-V Controllers • Signaling Rate Options Optimized for: 250 kbps, 20 Mbps, 50 Mbps • Glitch Free Power-Up and Power-Down Bus Inputs and Outputs 2 Applications • Factory Automation • Telecommunications Infrastructure • Motion Control #SN65HVD75D #RS485 #RS422 #Transceiver #TexasInstruments #IndustrialCommunication #FactoryAutomation #MotionControl #TelecomInfrastructure #ESDProtection #HalfDuplex #InterfaceIC #EmbeddedSystems #IndustrialElectronics #DataCommunication

Bipolar (BJT) Transistor Array Surface Mount 16-SOIC Darlington Transistor Array IC – High-voltage, high-current driver array containing seven NPN Darlington pairs with open-collector outputs. The ULN2003AIDR supports output voltage up to 50 V and collector current up to 500 mA per channel, with input-compatible logic levels and a 16-pin SOIC package. #DarlingtonArray #TransistorDriver #HighVoltageDriver #HighCurrentDriver #ULN2003A #TexasInstruments

Low-Noise Low-Dropout (LDO) Voltage Regulator – Fixed 3.0 V positive-output LDO regulator providing up to 300 mA output current for low-noise power regulation. Operates from a 1.6 V to 6.0 V input voltage, features 140 mV maximum dropout voltage at 300 mA, 15 µA typical quiescent current, 65 dB to 40 dB PSRR (100 Hz to 1 MHz), and an enable input for power management. Includes overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO). Specified for an operating junction temperature range of −40°C to +125°C and housed in a 5-pin SOT-23 (DBV) package. #TexasInstruments #TPS7A2030PDBVR #LDO #VoltageRegulator #LowDropout #300mA #3V #LowNoise #PowerManagement #SOT23 #EmbeddedSystems #PMIC

Hall Effect Sensor Single Axis SOT-23-3 Hall-Effect Sensor for linear magnetic field sensing, providing an analog ratiometric voltage output proportional to the applied magnetic flux density. The DRV5056A4QDBZR operates from a 2.7 V to 38 V supply, supports unidirectional magnetic field detection, and features a 20 kHz bandwidth with integrated temperature compensation for stable operation over the specified operating temperature range. #HallEffectSensor #LinearHallSensor #MagneticFieldSensor #AnalogOutput #RatiometricOutput #2.7Vto38V #20kHzBandwidth #TexasInstruments #DRV5056A4QDBZR

Bipolar Motor Driver NMOS On/Off, PWM 44-HTSSOP The DRV8262QDDWRQ1 is an automotive-qualified, high-power H-bridge motor driver from Texas Instruments designed for 24 V and 48 V automotive systems. It integrates two H-bridges capable of driving one or two brushed DC motors, a bipolar stepper motor, or thermoelectric coolers (TECs). The device features integrated high-side current sensing, programmable current regulation, and comprehensive protection functions, eliminating the need for external current-sense resistors while reducing PCB area and system cost. It supports wide supply voltages from 4.5 V to 60 V, making it suitable for demanding automotive body electronics and industrial motor control applications. Key Features Automotive AEC-Q100 Grade 1 qualified (-40°C to +125°C) Wide 4.5 V to 60 V operating supply voltage Dual H-bridge or single high-current H-bridge operation Drives: One or two brushed DC motors One bipolar stepper motor One or two thermoelectric coolers (TECs) Up to 8 A peak (dual H-bridge mode) Up to 16 A peak (single H-bridge mode) Low MOSFET on-resistance: 100 mΩ (dual H-bridge) 50 mΩ (single H-bridge) Integrated high-side current sensing with ±4% accuracy Programmable current regulation and current limiting Supports 1.8 V, 3.3 V, and 5 V logic interfaces Configurable PWM control modes (PH/EN or IN/IN) Ultra-low 3 µA sleep current Integrated protection features: Undervoltage Lockout (UVLO) Charge Pump Undervoltage (CPUV) Overcurrent Protection (OCP) Thermal Shutdown (OTSD) Fault output (nFAULT) Functional safety-capable with supporting documentation for automotive system design. #DRV8262QDDWRQ1 #MotorDriver #HBridge #AutomotiveElectronics #BrushedDCMotor #StepperMotor #CurrentSense #AECQ100 #TexasInstruments #EmbeddedSystems #PowerManagement #PCBDesign

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

The TPS3839G33DBZT is an ultra-low-power voltage supervisor designed to monitor system supply rails and provide reliable reset signaling for microcontrollers, processors, FPGAs, and other digital systems. The device continuously supervises the supply voltage and asserts a reset output when the monitored voltage falls below the factory-programmed threshold, ensuring proper system startup, shutdown, and fault recovery. Its low quiescent current makes it particularly suitable for battery-powered, portable, and energy-efficient applications where power consumption is critical. The device features a precision voltage monitoring architecture with a fixed reset threshold optimized for nominal logic supply rails. It provides a stable reset output with an internally defined reset timeout period, eliminating the need for external timing components. The compact package and robust noise immunity make it ideal for embedded systems, industrial controls, consumer electronics, IoT devices, medical equipment, and wireless communication platforms. Key Features Ultra-low quiescent current operation Precision fixed-voltage supervision Factory-programmed reset threshold for logic supply monitoring Active-low reset output Internal reset timeout delay High threshold accuracy over temperature Fast response to undervoltage conditions Push-pull reset output configuration No external components required for operation Compact surface-mount package Wide operating temperature range High reliability and low power consumption Applications Microcontroller reset generation Embedded control systems Battery-powered electronics Industrial automation equipment IoT and wireless sensor nodes Portable medical devices Consumer electronics Data acquisition systems Power management subsystems Communication and networking equipment Electrical Characteristics Fixed supply voltage monitoring Precision undervoltage detection Low operating current Integrated reset timing circuitry Stable reset assertion during power-up and brownout conditions Noise-tolerant voltage supervision Reliable operation across specified temperature range Package Information Surface-mount package Compact footprint for space-constrained designs RoHS-compliant construction Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powersupervisor #voltagesupervisor #resetcontroller #powermanagement #embeddedsystems #microcontroller #lowpower #batterypowered #industrialelectronics #iot #electronicsdesign #semiconductor #texasinstruments

Voltage Level Translator Bidirectional 1 Circuit 2 Channel 26Mbps 8-XSON (1.35x1) The TCA39416DTWR is a high-performance LED driver and multiplexer IC designed for precise control of multi-channel lighting applications. It integrates constant-current drivers, digital dimming capability, and multiplexing functionality to efficiently manage a large array of LEDs in industrial, automotive, display, and general-purpose lighting systems. The device supports high-speed operation and flexible channel configuration, ensuring uniform brightness control, low electromagnetic interference, and robust performance in space-constrained designs. Its compact surface-mount package and integrated control features make it ideal for embedded lighting solutions requiring reliable, accurate, and scalable LED management. Engineering Specifications Manufacturer: Texas Instruments Part Number: TCA39416DTWR Device Type: LED Driver and Multiplexer IC Channel Count: Multi-Channel LED Control Driver Type: Constant-Current LED Driver Dimming Control: Digital PWM Dimming Supported Multiplexing: Integrated Multiplexer Functionality Input Interface: Digital Control Inputs Output Configuration: Sinking LED Channels Supply Voltage Range: Wide Operating Range Switching Frequency: High-Speed LED Operation Thermal Management: Efficient Power Dissipation Design Package Type: TSSOP Surface-Mount Package Mounting Style: Surface Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Industrial LED Lighting, Automotive Light Arrays, Display Backlighting, Status Indicators, Embedded LED Systems, Digital Signage, Instrumentation Panels, Multi-Channel LED Control Key Features Multi-channel constant-current LED drivers Integrated digital dimming via PWM control Built-in multiplexing for efficient channel management Compact surface-mount package for PCB integration High-speed operation for flicker-free lighting Low power consumption and thermal optimization Reliable performance in industrial and automotive environments Uniform brightness control across channels Flexible configuration for scalable LED arrays Designed for embedded lighting and display applications #TCA39416DTWR #TexasInstruments #LEDDriver #MultiplexerIC #MultiChannelLED #PWMDimming #EmbeddedLighting #IndustrialElectronics #AutomotiveLighting #DisplayBacklight #LEDControl #SurfaceMountIC #ElectronicComponents #PCBDesign #LEDArray #HighSpeedLED #IndustrialGrade #SignalControl #PowerEfficient #LightingElectronics

Audio 16 b, 20 b, 24 b, 32 b 768k I2C, I2S, TDM 20-WQFN (3x3) The TAA3020IRTER is a high-performance 2-channel audio analog-to-digital converter (ADC) from Texas Instruments, designed for professional and embedded audio applications. It supports up to two analog microphone/line inputs or four digital PDM microphone channels with simultaneous sampling. The device delivers excellent audio quality with a 104 dB dynamic range, supports sample rates up to 768 kHz, and integrates advanced audio processing features such as programmable gain, digital filters, automatic gain control (AGC), voice activity detection (VAD), and an integrated PLL. It communicates through an I²C control interface and supports I²S, TDM, and Left-Justified (LJ) digital audio formats, making it ideal for smart speakers, conferencing systems, IP cameras, and other high-performance audio acquisition systems. Key Features High-performance 2-channel audio ADC Supports 2 analog microphone/line inputs or 4 digital PDM microphone inputs 104 dB dynamic range (DR) and –95 dB THD+N Sampling rates from 8 kHz to 768 kHz Programmable microphone gain from 0 dB to 42 dB Digital volume control from –100 dB to +27 dB Integrated programmable HPF, biquad filters, and low-latency filter modes Built-in Automatic Gain Control (AGC) and Voice Activity Detection (VAD) Integrated audio PLL and programmable microphone bias supply Supports I²S, TDM, and Left-Justified (LJ) audio interfaces Configurable for 1.8 V or 3.3 V supply operation Available in a compact 20-pin WQFN (RTE) package Operating temperature range: –40°C to +105°C #AudioADC #TexasInstruments #TAA3020 #HighPerformanceADC #I2S #TDM #PDMMicrophone #AudioProcessing #AGC #VAD #EmbeddedAudio #ProfessionalAudio

This TPS5430DDA-based design is a step-down voltage regulator, converting a higher input voltage to a stable 5V output. Ideal for applications requiring a regulated 5V supply. #referenceDesign #Module #Sublayout #stepDown #voltageRegulator #5V #TPS5430 #TPS5430DDA #reusable #module #powermanagement #texas-instruments #sublayout