Part Datasheet Review and Validation

flux

Reviewed the SN65HVD75D part against the TI datasheet and created the detailed report in sn65hvd75d-part-review. The pinout, 8-pin SOIC package metadata, and symbol terminals match the datasheet; no Datasheet property update was needed because one was already set.
Open items:
  • Pin descriptions/types are not populated.
  • Datasheet URL is an uploaded official PDF, not a direct ti.com URL.
  • Footprint pad dimensions could not be fully verified from available layout data.
Suggested next steps:
  1. Add pin descriptions and pin types to the terminals.
  2. Replace the Datasheet URL with a direct TI URL if desired.
  3. Perform a dimensional footprint check against TI’s D0008A SOIC land pattern.
A

adrian95

Add the recommended pin descriptions and pin types to the terminals.

flux

I’ll update each terminal with the datasheet-backed pin description and electrical pin type, then inspect the schematic to confirm the metadata is present.

flux

The descriptions were added; I’m normalizing a few pin type values to Flux’s standard options before verification.

flux

Updated and verified all 8 terminal pin descriptions and pin types from the TI datasheet.
Open items:
  • None.
Suggested next steps:
  1. Replace the uploaded Datasheet URL with a direct TI URL if you want stronger traceability.
  2. Do a dimensional check of the SOIC-8 footprint against TI’s D0008A land pattern.
Use TI datasheet
Check SOIC footprint
Run part review
Update review document
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Terminal Order
R
1
Output
Terminal
Receiver output
~RE
2
Input
Terminal
Receiver enable input, active low
DE
3
Input
Terminal
Driver enable input
D
4
Input
Terminal
Driver data input
GND
5
Ground
Terminal
Ground reference
A
6
Bi-Directional
Terminal
Non-inverting RS-485/RS-422 bus terminal
B
7
Bi-Directional
Terminal
Inverting RS-485/RS-422 bus terminal
VCC
8
Power In
Terminal
3.0 V to 3.6 V supply input

SN65HVD75D