The RFFM6901 is a single-chip RF front-end module (FEM) designed for 868 MHz to 928 MHz ISM-band wireless communication applications. It integrates a high-power power amplifier (PA), low-noise amplifier (LNA), antenna diversity switch, and matching circuitry into a compact package, helping reduce external components, PCB space, and overall system cost. It is commonly used in smart energy systems, wireless metering, industrial monitoring, alarm systems, and other Sub-1 GHz wireless devices. Key Features Operating frequency range: 868 MHz to 928 MHz Integrated 1 W power amplifier Up to +30 dBm transmit output power Integrated low-noise amplifier with bypass mode Dual-port antenna diversity switch Separate 50 Ω transmit and receive interfaces Compact 32-pin LGA package (6 mm × 6 mm) Supply voltage range: 2.8 V to 4.2 V Typical LNA gain: 17 dB Low receiver noise figure: 1.5 dB Designed for portable and battery-powered wireless systems RoHS compliant Typical Applications Smart energy and smart metering Wireless alarm and security systems ISM-band communication devices Industrial wireless sensors Portable RF equipment IoT Sub-1 GHz wireless systems Search across more sources

FLASH - NOR Memory IC 128Mb (16M x 8) SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC 128M-bit Serial Flash Memory with uniform 4KB sectors and Dual/Quad SPI Winbond W25Q128JV is a 128-Mbit (16 MB) serial NOR Flash memory device designed for code and data storage in embedded systems. It supports standard SPI, Dual SPI, Quad SPI (QSPI), and Dual/Quad Peripheral Interface (DPI/QPI) modes, enabling high-speed data transfer rates up to 133 MHz clock operation and up to 532 MB/s equivalent throughput in Quad I/O DTR mode. The device supports Execute-In-Place (XIP), allowing processors and microcontrollers to run code directly from external flash memory without copying it to RAM. Features include 4 KB sector erase, 32 KB and 64 KB block erase, page programming, hardware/software write protection, security registers, JEDEC identification, SFDP support, suspend/resume operations, and low-power standby modes. Suitable for microcontrollers, FPGA configuration storage, IoT devices, industrial controllers, networking equipment, consumer electronics, and embedded systems requiring reliable non-volatile memory. Search Keywords: W25Q128JV, Winbond flash memory, SPI NOR Flash, QSPI Flash, Quad SPI memory, Serial Flash memory, 128Mbit Flash, 16MB Flash memory, Execute In Place XIP, external MCU flash, ESP32 flash memory, FPGA configuration memory, NOR flash storage, W25Q128, Dual SPI Flash, Quad I/O Flash, embedded nonvolatile memory, serial flash IC Hashtags: #W25Q128JV #Winbond #NORFlash #SPIMemory #QSPI #SerialFlash #FlashMemory #EmbeddedSystems #Microcontroller #ESP32 #FPGA #NonVolatileMemory #XIP #IoT #ElectronicsDesign #MemoryIC #FirmwareStorage #QuadSPI #EmbeddedHardware #ElectronicComponents

Raspberry Pi Pico 2 W features 2.4GHz 802.11n wireless LAN and Bluetooth 5.2, giving you even more flexibility in your IoT or smart product designs and expanding the possibilities for your projects. And equipped with the RP2350, a cutting-edge, high-performance microcontroller designed with enhanced security and versatility in mind. #raspberrypi #newpico #pipico2 #pipico #rp2350 #shield #pipico2W #wifi #bluetooth

The Raspberry Pi Pico 2 is now equipped with the RP2350, a cutting-edge, high-performance microcontroller designed with enhanced security and versatility in mind. Every element of its design has been upgraded, from the advanced CPU cores to the innovative PIO (Programmable I/O) interfacing subsystem. #raspberrypi #newpico #pipico2 #pipico #rp2350 #shield

Single-Core Arm® Cortex®-A7 Microprocessor (MPU) – 32-bit embedded microprocessor designed for industrial automation, Human-Machine Interfaces (HMI), IoT gateways, edge computing, smart home devices, medical equipment, multimedia systems, and Linux-based embedded applications. Part of the STM32MP1 Series, the STM32MP135FAF7 integrates a single Arm® Cortex®-A7 core operating at up to 1 GHz, with NEON™ SIMD multimedia acceleration and 3D graphics acceleration for enhanced application performance. Supports external DDR3, DDR3L, LPDDR2, and LPDDR3 memory, enabling high-performance operating systems such as Linux. Features dual Gigabit Ethernet, dual USB 2.0, CAN FD, I²C, SPI, UART/USART, SAI, SPDIF, MMC/SD/SDIO, GPIO, and IRDA interfaces for flexible connectivity. Includes advanced security features such as Arm TrustZone®, AES encryption, SHA-1/SHA-2, Secure Boot, Secure Debug, True Random Number Generator (TRNG), tamper detection, and volatile key storage for secure embedded applications. Operates with 1.8 V, 2.5 V, and 3.3 V I/O supplies, supports a −40°C to +105°C junction temperature range, and is packaged in a 320-ball TFBGA (11 × 11 mm). #STMicroelectronics #STM32MP135FAF7 #STM32MP1 #CortexA7 #Microprocessor #LinuxMPU #IndustrialAutomation #EdgeComputing #IoTGateway #GigabitEthernet #TrustZone #EmbeddedLinux #EmbeddedSystems

The XIAO RP2350 packs the power of the Raspberry Pi RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic XIAO form factor. Measuring just 21x17.5mm, it features 19 multifunction GPIOs, an RGB LED, and a Battery Management System with ultra-low power consumption of 27μA, battery power supply, and direct battery voltage measurement. Thanks to the XIAO ecosystem, the XIAO RP2350 is compatible with a wide range of add-ons, including displays, LED matrix, Grove modules, CAN Bus, Vision AI sensors, and mmWave sensors. With native support for MicroPython, C, and C++, the XIAO RP2350 is perfect for developers of all levels looking to create compact, battery-powered applications for smart control, wearables, DIY keyboards, and more.

IoT Secure Element with EdgeLock® SE051 Security Technology – Hardware-based secure element IC designed for IoT security, connected devices, industrial automation, smart home systems, automotive applications, cloud authentication, and embedded cybersecurity solutions. Provides a tamper-resistant secure environment for cryptographic key storage, device identity protection, secure authentication, and trusted communication. Features Common Criteria EAL5+ certified secure hardware, EdgeLock® secure architecture, ECC and RSA cryptographic support, AES encryption/decryption, SHA-2 hashing, HMAC, True Random Number Generator (TRNG), secure key generation, and secure object storage for protecting sensitive credentials and certificates. Supports I²C communication interface with host microcontrollers and is compatible with secure cloud platforms and IoT provisioning workflows. Operates from a 1.71 V to 3.6 V supply, supports −40°C to +105°C industrial temperature operation, and is housed in a compact 20-HX2QFN (3 × 3 mm) surface-mount package. #NXP #SE051C2HQ1Z01XDZ #EdgeLockSE051 #SecureElement #IoTSecurity #HardwareSecurity #Cryptography #SecureAuthentication #AES #ECC #RSA #TRNG #IndustrialIoT #EmbeddedSystems

Ultra-Low-Power Arm® Cortex®-M33 Microcontroller – 32-bit ultra-low-power microcontroller based on the Arm® Cortex®-M33 core with TrustZone® security for industrial IoT, wearable devices, smart sensors, medical equipment, home automation, metering, and battery-powered embedded applications. Operates at up to 160 MHz with 1 MB Flash memory, 786 KB SRAM, and a 1.71 V to 3.6 V supply voltage, delivering high performance while minimizing power consumption. Features single-precision FPU, DSP instructions, Memory Protection Unit (MPU), TrustZone® hardware security, 11-channel 12-/14-bit ADC, 2-channel 12-bit DAC, USB 2.0 Full-Speed OTG, CAN FD, I²C, SPI, UART/USART, SAI, SPDIF, LIN, SmartCard, motor-control PWM, DMA, Octo-SPI/Quad-SPI memory interface, AES-256, PKA, HASH, TRNG, secure boot, and tamper detection for secure, energy-efficient embedded designs. Provides 37 GPIOs, operates over a −40°C to +85°C temperature range, and is housed in a 48-pin LQFP (7 × 7 mm) package. #STMicroelectronics #STM32U575CGT6 #STM32U5 #CortexM33 #UltraLowPowerMCU #TrustZone #SecureMCU #IndustrialIoT #USBOTG #CANFD #EmbeddedSecurity #EmbeddedSystems

The RP2350, developed by Raspberry Pi Ltd, is a high-performance microcontroller designed to cater to a broad range of applications requiring efficient power management, advanced security features, and versatile IO options. This microcontroller stands out with its dual-core architecture, featuring either Cortex-M33 or Hazard3 processors operating at up to 150 MHz, ensuring robust performance for complex applications. It boasts a substantial 520 KB of on-chip SRAM distributed across 10 independent banks, enhancing parallel data processing capabilities. Additionally, the RP2350 supports up to 16 MB of external QSPI flash/PSRAM for extensive program and data storage, further expandable via an optional second chip-select. A notable feature of the RP2350 is its integrated on-chip switched-mode power supply, designed to generate core voltage efficiently, complemented by a low-quiescent-current LDO mode for reduced power consumption in sleep states. Security is a paramount feature of the RP2350, offering options for boot signing with key fingerprint in OTP, hardware mitigations against fault injection attacks, and a hardware SHA-256 accelerator for cryptographic operations. The microcontroller is also equipped with a comprehensive set of peripherals, including USB 1.1 controller and PHY, multiple UARTs, SPI, and I2C controllers, 24 PWM channels, and 12 programmable IO (PIO) state machines, providing extensive interface capabilities. The RP2350 is available in QFN-60 and QFN-80 packages, with or without flash-in-package options, catering to various design requirements and application needs.

Switch DIP ON OFF SPST 6 Recessed Slide 0.025A 24VDC J-Bend 1.27mm SMD Tube Series 218 is a compact DIP switch for miniature application where size is a constraint. It is ideal for server, security, HVAC system. 218 switch design aids improved reliability with positive detent and non-deflecting contactor during actuation.

24 GHz Human Presence Radar Sensor Module – 24 GHz FMCW millimeter-wave human presence detection module designed for smart home automation, occupancy sensing, lighting control, security systems, industrial automation, IoT devices, and embedded presence detection applications. Operates from a 5 V to 12 V supply with a typical current consumption of 79 mA and detects both moving and stationary human targets using Frequency-Modulated Continuous Wave (FMCW) radar technology. Features a UART digital communication interface, configurable detection thresholds, event/occupancy detection, high immunity to ambient light, temperature, smoke, and dust, and supports motion, micro-motion, and static presence detection without requiring direct line-of-sight. The module measures 22 × 16 mm, is designed for surface-mount installation, and operates over a −40°C to +85°C temperature range, making it suitable for long-term embedded and industrial deployments. #HiLink #HLKLD2410CP #HLKLD2410C #24GHzRadar #HumanPresenceSensor #FMCWRadar #OccupancySensor #MotionDetection #UART #IoT #SmartHome #EmbeddedSystems

IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.0, Thread, Zigbee® 2.4GHz 48-VFQFN Exposed Pad The NRF52840-QFAA-F-R belongs to Nordic’s nRF52 series and supports multiple wireless standards including Bluetooth 5, Bluetooth Low Energy (BLE), Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols. It features a 64 MHz ARM Cortex-M4F CPU with floating-point unit (FPU), making it suitable for both wireless communication and real-time embedded processing. The device integrates large memory resources, rich peripherals, USB support, NFC capability, and advanced security features, reducing the need for external components in wireless embedded designs. Key Features 32-bit ARM Cortex-M4F processor running at 64 MHz 1 MB Flash memory and 256 KB RAM Supports Bluetooth 5 / BLE, Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols IEEE 802.15.4 compliant radio Up to +8 dBm TX output power High receiver sensitivity down to −103 dBm Data rates up to 2 Mbps Ultra-low power consumption for battery-powered applications USB 2.0 Full-Speed controller NFC-A tag support Multiple communication interfaces: SPI UART I2C (TWI) I2S PWM PDM ADC Up to 48 GPIOs Integrated ARM CryptoCell-310 security engine Operating voltage range: 1.7 V to 5.5 V Operating temperature: −40°C to +85°C Compact 48-QFN (6×6 mm) package Typical Applications BLE devices Smart home products Wearables Wireless sensors Industrial IoT HID devices (keyboard/mouse) Asset tracking Mesh networking devices USB dongles and gateways PCB Design Notes Community PCB reviews commonly recommend: Proper RF grounding and 50-ohm antenna routing Using ESD/TVS protection on USB lines Keeping RF matching components close to the antenna Using solid ground planes for 2.4 GHz performance #CommonPartsLibrary #IntegratedCircuit #RF

STM32WLE5JC is an ultra-low-power wireless microcontroller from STMicroelectronics that combines an Arm Cortex-M4 processor with an integrated Sub-GHz radio transceiver in a single chip. Designed for long-range, low-power IoT and LPWAN applications, it supports LoRa®, (G)FSK, (G)MSK, and BPSK modulation schemes, making it ideal for smart metering, industrial monitoring, agriculture, asset tracking, and remote sensing applications. The device offers a high level of integration, robust security features, and extensive peripheral support while maintaining very low power consumption. Key Features Arm Cortex-M4 32-bit MCU running at up to 48 MHz Integrated Sub-GHz radio transceiver (150 MHz to 960 MHz) Supports LoRa®, LoRaWAN®, (G)FSK, (G)MSK, and BPSK modulations Up to 256 KB Flash memory and 64 KB SRAM Ultra-low-power operation with multiple low-power modes Programmable RF output power up to +22 dBm High receiver sensitivity down to -148 dBm (LoRa mode) Hardware AES-256 encryption and True Random Number Generator (RNG) Public Key Accelerator (PKA) for enhanced security 12-bit ADC, 12-bit DAC, comparators, and DMA controllers Multiple communication interfaces: USART, LPUART, SPI, I²C Operating voltage range: 1.8 V to 3.6 V Operating temperature range: -40°C to +105°C Available in compact UFQFPN, UFBGA, and WLCSP packages #STM32WLE5JC #STM32WL #LoRa #LoRaWAN #SubGHz #WirelessMCU #CortexM4 #LPWAN #IoT #SmartMetering #IndustrialIoT #EmbeddedSystems #STMicroelectronics

The RP2350, developed by Raspberry Pi Ltd, is a high-performance microcontroller designed to cater to a broad range of applications requiring efficient power management, advanced security features, and versatile IO options. This microcontroller stands out with its dual-core architecture, featuring either Cortex-M33 or Hazard3 processors operating at up to 150 MHz, ensuring robust performance for complex applications. It boasts a substantial 520 KB of on-chip SRAM distributed across 10 independent banks, enhancing parallel data processing capabilities. Additionally, the RP2350 supports up to 16 MB of external QSPI flash/PSRAM for extensive program and data storage, further expandable via an optional second chip-select. A notable feature of the RP2350 is its integrated on-chip switched-mode power supply, designed to generate core voltage efficiently, complemented by a low-quiescent-current LDO mode for reduced power consumption in sleep states. Security is a paramount feature of the RP2350, offering options for boot signing with key fingerprint in OTP, hardware mitigations against fault injection attacks, and a hardware SHA-256 accelerator for cryptographic operations. The microcontroller is also equipped with a comprehensive set of peripherals, including USB 1.1 controller and PHY, multiple UARTs, SPI, and I2C controllers, 24 PWM channels, and 12 programmable IO (PIO) state machines, providing extensive interface capabilities. The RP2350 is available in QFN-60 and QFN-80 packages, with or without flash-in-package options, catering to various design requirements and application needs.

High-Performance Arm® Cortex®-M33 Microcontroller – 32-bit Arm Cortex-M33 microcontroller with TrustZone® security, DSP, and single-precision FPU for industrial automation, IoT gateways, motor control, medical devices, secure embedded systems, and communication applications. Operates at up to 250 MHz with 2 MB dual-bank Flash memory, 640 KB SRAM with ECC, and a 1.71 V to 3.6 V supply voltage. Features Arm TrustZone® security, AES, PKA, HASH, TRNG cryptographic accelerators, secure boot, debug authentication, and on-the-fly decryption (OTFDEC) for enhanced cybersecurity. Integrates extensive peripherals including Ethernet MAC, USB 2.0 Full-Speed OTG, FDCAN, SDMMC, Octo-SPI, Quad-SPI, I²C, SPI/I²S, UART/USART, SAI, SPDIF, MDIO, 16-channel 12-bit SAR ADC, dual 12-bit DAC, multiple timers/PWM channels, DMA, watchdogs, and RTC. Designed for industrial-grade applications, it operates over a −40°C to +105°C ambient temperature range and is housed in a 100-pin LQFP (14 × 14 mm) package. #STMicroelectronics #STM32H573VIT7 #STM32H5 #STM32H573 #CortexM33 #Microcontroller #TrustZone #SecureMCU #Ethernet #USBOTG #FDCAN #EmbeddedSystems

The RP2350, developed by Raspberry Pi Ltd, is a high-performance microcontroller designed to cater to a broad range of applications requiring efficient power management, advanced security features, and versatile IO options. This microcontroller stands out with its dual-core architecture, featuring either Cortex-M33 or Hazard3 processors operating at up to 150 MHz, ensuring robust performance for complex applications. It boasts a substantial 520 KB of on-chip SRAM distributed across 10 independent banks, enhancing parallel data processing capabilities. Additionally, the RP2350 supports up to 16 MB of external QSPI flash/PSRAM for extensive program and data storage, further expandable via an optional second chip-select. A notable feature of the RP2350 is its integrated on-chip switched-mode power supply, designed to generate core voltage efficiently, complemented by a low-quiescent-current LDO mode for reduced power consumption in sleep states. Security is a paramount feature of the RP2350, offering options for boot signing with key fingerprint in OTP, hardware mitigations against fault injection attacks, and a hardware SHA-256 accelerator for cryptographic operations. The microcontroller is also equipped with a comprehensive set of peripherals, including USB 1.1 controller and PHY, multiple UARTs, SPI, and I2C controllers, 24 PWM channels, and 12 programmable IO (PIO) state machines, providing extensive interface capabilities. The RP2350 is available in QFN-60 and QFN-80 packages, with or without flash-in-package options, catering to various design requirements and application needs.

The RP2350, developed by Raspberry Pi Ltd, represents a significant advancement in the field of microcontrollers, building upon the foundation laid by its predecessor, the RP2040. This component is designed to cater to a wide range of applications requiring dual-core processing capabilities, with the option to switch between Dual Cortex-M33 or Hazard3 processors operating at up to 150 MHz. It features an extensive 520 kB of on-chip SRAM distributed across 10 independent banks, alongside 8 KB of one-time-programmable (OTP) storage. External memory interfaces are well-supported, with provisions for up to 16 MB of external QSPI flash/PSRAM, and an additional 16 MB accessible via an optional second chip-select, facilitating extensive code and data storage options. Security features are robust, including options for boot signing enforced by on-chip mask ROM, with key fingerprints stored in OTP, and hardware mitigations against fault injection attacks. The RP2350 also boasts a comprehensive set of peripherals, including 2x UARTs, 2x SPI controllers, 2x I2C controllers, 24x PWM channels, and a USB 1.1 controller with PHY for host and device support, among others. Programmable IO (PIO) state machines enhance its flexibility, enabling the implementation of custom peripherals. For developers, the RP2350 offers low-power operation modes and a built-in boot ROM that supports direct boot from external flash or OTP, serial boot from USB or UART, and secure boot with code signature enforcement. The device is available in QFN-60 (7x7 mm) and QFN-80 (10x10 mm) packages, with or without built-in flash, catering to diverse application requirements. This microcontroller is a compelling choice for sophisticated projects that demand high performance, extensive memory and peripheral support, and advanced security features.