Neutrik NSJ12HF-1 is a horizontal PCB-mount dual 1/4″ stereo stacking jack socket with switched contacts, full threaded nose, and high-density 1RU-compatible form factor. Rated 3 A per contact, 0.5 A switch contact at 50 V, 1 kVdc dielectric strength, and -25 °C to +70 °C operating range.

Isolated Module DC DC Converter 1 Output 18V 3.75A 36V - 75V Input DC-DC Converter providing an isolated single-output regulated DC supply with a 36–75 VDC input range and 18 VDC nominal output. Delivers up to 3.75 A (67.5 W max) with 90.5% typical efficiency, 1.5 kVDC input-to-output isolation, 50 mV maximum ripple and noise, and operates over a -40°C to +125°C temperature range. Packaged in an 1/8-brick PCB-mount DIP module with remote on/off control. #DCDCConverter #IsolatedConverter #PowerModule #48VInput #18VOutput #67W #PCBMount #EighthBrick #TDKLambda

The CPDT-12V is an electromechanical relay designed for switching and control applications in industrial, automotive, consumer, and embedded electronic systems. Operating from a nominal twelve-volt coil supply, this relay provides reliable isolation between low-power control circuitry and higher-power loads. Its compact construction, robust contact mechanism, and dependable switching performance make it suitable for power distribution, automation controls, battery-powered equipment, protection circuits, and general-purpose switching applications. The relay incorporates a magnetic coil and mechanical contact assembly that enables safe control of AC or DC loads while maintaining electrical isolation between the control and load sides. Its durable design supports repeated switching operations and long service life in demanding environments. Features Electromechanical relay with nominal twelve-volt coil operation Provides galvanic isolation between control and load circuits Suitable for AC and DC load switching Reliable contact performance for power and signal applications Compact package for PCB mounting Low control power requirement Durable contact system for long operational life Fast switching response characteristics Compatible with industrial and embedded control systems Designed for automation, protection, and power management circuits Applications Industrial automation equipment Power control modules Battery-powered systems Automotive electronics Home appliance control circuits Smart energy management devices Security and alarm systems Embedded controller interfaces Motor and actuator switching General-purpose load control applications Electrical Characteristics Nominal coil voltage: twelve volts DC Electromagnetic actuation mechanism Isolated contact structure Designed for low-voltage control interfaces Supports switching of resistive and inductive loads Stable operation across specified environmental conditions Mechanical Characteristics PCB-mount relay construction Compact footprint for space-constrained designs Durable housing for electrical and mechanical protection Secure terminal arrangement for reliable soldering and connection Engineered for repeated switching cycles Environmental Characteristics Suitable for indoor industrial and commercial environments Resistant to normal operating vibration and mechanical shock conditions Designed for reliable operation across standard electronic equipment temperature ranges #commonpartslibrary #relay #electromechanicalrelay #switchingdevice #powermanagement #industrialautomation #controlsystems #pcbmount #automationelectronics #circuitprotection #embeddedsystems #industrialelectronics

ZMPT101B is a high-precision current-type voltage transformer designed for AC voltage sensing, monitoring, and power measurement applications. It provides excellent electrical isolation between high-voltage AC lines and low-voltage measurement circuits, making it ideal for energy monitoring systems, smart meters, power analyzers, and microcontroller-based projects using Arduino, ESP32, and similar platforms. Its compact size, high accuracy, and stable performance enable reliable AC voltage measurement while maintaining user safety through galvanic isolation. Key Features High-precision AC voltage measurement Excellent galvanic isolation (up to 4 kV isolation voltage) Wide operating voltage measurement range High accuracy and good linearity Low phase angle error Compact PCB-mount package Suitable for voltage and power monitoring applications Good consistency and long-term stability Compatible with signal conditioning and ADC circuits Operating temperature range: -40°C to +60°C #ZMPT101B #VoltageTransformer #ACVoltageSensor #PowerMonitoring #EnergyMeter #IsolationTransformer #Arduino #ESP32 #IoT #EmbeddedSystems #Electronics #SmartMeter

Battery Holder (Open) Multiple (20700, 21700) 1 Cell Solder Lug The Keystone 1121 is a PCB-mount cylindrical battery holder manufactured by Keystone Electronics, designed to hold one large-format lithium-ion cell, specifically 20700 or 21700 battery sizes. It features an open-frame holder design with solder lug (through-hole) terminals, allowing secure mechanical mounting and reliable electrical connection to a PCB. This type of holder is commonly used in high-capacity battery-powered systems where replaceable cylindrical cells are required. Key Features Battery Compatibility Supports 20700 and 21700 cylindrical Li-ion cells Designed for single-cell (1S) configurations Mechanical & Mounting Through-hole PCB mounting Solder lug terminals for strong electrical and mechanical connection Open-style holder for easy battery insertion/removal Construction Metal contacts for low resistance and durability Designed to securely retain larger cylindrical batteries Physical Characteristics Height above PCB: approx. 17.27 mm Part of Keystone 1100 series holders Typical Applications Battery-powered embedded systems Portable power devices Industrial electronics High-capacity IoT or energy storage modules #holder

Non-Isolated DC/DC Converters Ultra-small DC to Regulated DC Converter to 100V, Low-current, PCB-Mount Module, Unipolar, Single Output #power-supply #DCDC-Converter #ULTRAVOLT® XS #0.1XS5

Enclosed AC DC Converters 1 Uitgang 12V - - - 1.8A 85 ~ 264 VAC, 120 ~ 370 VDC Input The IRM-20-12 is a compact enclosed AC-DC power supply module from MEAN WELL’s IRM-20 series. It is designed to convert a wide-range AC input into a stable 12V DC output, delivering reliable power for embedded systems, industrial electronics, and general-purpose PCB-mounted applications. It is a board-mount (through-hole) module with an encapsulated design, making it suitable for space-constrained and high-reliability environments. Key Features AC-DC Converter Module Converts AC mains to regulated 12V DC output Power Rating Up to 20–22W output power Output Capability 12V DC / 1.8A max current Universal Input Range 85–264 VAC (wide input compatibility) High Efficiency Around ~84% typical efficiency Compact Enclosed Design Fully encapsulated plastic case for protection and durability Through-Hole PCB Mount Designed for direct soldering onto PCB boards Low No-Load Power Consumption <0.1W standby consumption Built-in Protection Functions Overload protection Short circuit protection Overvoltage protection Wide Operating Temperature Typically -30°C to +70°C Safety Certifications UL, CE, TUV, CB approved (varies by region) EMI Compliance Designed to meet Class B EMI standards (with internal filtering) Typical Applications Industrial automation systems Factory equipment Embedded electronics IoT devices LED lighting systems Small control boards and instrumentation #CommonPartsLibrary #powersupply #ACDCconverter

2 Position Wire to Board Terminal Block Horizontal with Board 0.100" (2.54mm) Through Hole 1725656 – PCB-mounted screw terminal block designed for secure wire-to-board connections in industrial, control, automation, instrumentation, and power distribution applications. Features a screw-clamp termination system that provides reliable electrical contact and strong wire retention under vibration and demanding operating conditions. The through-hole construction offers enhanced mechanical stability, making it suitable for long-term field installations and high-reliability electronic assemblies. Designed to simplify wiring, maintenance, and system integration while ensuring dependable signal and power connectivity. #TerminalBlock #ScrewTerminal #WireToBoard #IndustrialElectronics #PowerDistribution #AutomationSystems #ControlPanels #ThroughHoleConnector #PCBConnector #ReliableConnectivity #connector #Terminalblock #tht

Fuse Holder 80V 1 Circuit Blade Through Hole General Description The 178.7017.0001 is a PCB-mounted fuse holder designed for cartridge fuses, typically used in power input protection circuits. It provides a secure and reliable method for mounting and replacing fuses in electronic assemblies. This component is commonly used in industrial equipment, power supplies, and consumer electronics where overcurrent protection is required. Key Features Designed for standard cartridge fuses (commonly 5x20 mm format) Through-hole PCB mounting for secure mechanical stability Reliable electrical contact with low resistance Easy fuse replacement and maintenance High-temperature resistant housing material Suitable for mains and low-voltage applications Mechanical Characteristics Mounting Type: Through-Hole (THT) Fuse Size Compatibility: 5 mm x 20 mm Orientation: Vertical PCB mount Housing Material: Thermoplastic (UL94 V-0 rated) Pin Configuration: 2-pin Electrical Characteristics Rated Current: Up to 10 A (depending on fuse used) Rated Voltage: Up to 250 VAC Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) Storage Temperature Range: -40°C to +85°C Flame Rating: UL94 V-0 compliant Applications Power supply units Industrial control systems Consumer electronics Battery chargers AC mains protection circuits Compliance & Standards RoHS compliant UL recognized materials (depending on manufacturer variant) Notes Ensure compatibility with selected fuse rating and type Observe proper PCB layout spacing for high-voltage applications Follow safety standards when used in mains-powered circuits #commonpartslibrary #circuitprotection #fuseholder

WP-BUFU REDCUBE Bush, full height: 7mm, total height: 10.5mm, thread length: 4mm, pin length: 3.5mm, raster: 2.54mm, REDCUBE Press-Fit; M5, blind 4mm 16 Pin Screw Terminal, Power Tap M5 Through Hole The 7461147 is a high-current PCB-mounted power terminal from the REDCUBE® WP-BUFU series by Würth Elektronik. It is designed to provide a robust and low-resistance connection for transferring high currents between cables, busbars, and printed circuit boards. The terminal utilizes press-fit technology, eliminating the need for soldering while ensuring a gas-tight, vibration-resistant electrical connection. It is particularly suitable for power distribution, industrial equipment, automotive electronics, battery systems, and renewable energy applications. Key Features High current rating up to 180 A M5 screw terminal for secure high-power connections Press-fit termination for solderless PCB assembly 16-pin through-hole mounting configuration Gas-tight electrical connection for long-term reliability Excellent resistance to vibration and mechanical shock Low contact resistance for efficient power transfer Simplifies manufacturing by eliminating soldering processes Suitable for high-current power distribution and battery applications RoHS compliant design Typical Applications Power supplies and power converters Battery management and energy storage systems DC-DC and DC-AC converters Industrial automation equipment Automotive power electronics Solar and wind energy systems High-current PCB power distribution networks #CommonPartsLibrary #REDCUBE #PowerTerminal #PressFit #HighCurrentConnector #PCBTerminal #WurthElektronik #IndustrialElectronics #AutomotiveElectronics #PowerDistribution #EnergyStorage #RenewableEnergy #7461147

2 Position Wire to Board Terminal Block Horizontal with Board 0.375" (9.53mm) Through Hole # 1714971 ## General Description The 1714971 is a high-current printed circuit board terminal block manufactured by Phoenix Contact and designed for secure power and signal connections in industrial and commercial electronic equipment. The component utilizes a screw-clamp termination mechanism that provides reliable wire retention, low contact resistance, and long-term electrical stability. Its robust construction and through-hole mounting design make it suitable for applications requiring dependable field wiring, high-current handling capability, and resistance to mechanical stress. The terminal block is commonly used in power supplies, industrial automation systems, motor controllers, battery management systems, energy distribution equipment, instrumentation, and other applications requiring secure PCB-mounted power connections. ## Key Features ### Mechanical Characteristics * Through-hole PCB mounting * Screw-clamp wire termination * Side-entry wire connection * High-strength housing construction * Secure field-wire installation * Designed for repeated maintenance and servicing operations ### Electrical Characteristics * High-current carrying capability * Low contact resistance * Reliable electrical conductivity * Stable performance under demanding operating conditions * Suitable for power distribution and control applications ### Contact System * Corrosion-resistant conductive contacts * Screw-actuated clamping mechanism * Secure conductor retention * Reliable electrical connection during vibration and mechanical stress ### Material Construction * Industrial-grade thermoplastic housing * High-conductivity metal contacts * Flame-resistant insulation materials * RoHS-compliant construction ### Environmental Characteristics * Suitable for industrial environments * Resistant to mechanical wear * Durable under continuous operation * Designed for long service life ### Application Areas * Industrial Automation Equipment * Power Supply Systems * Motor Control Circuits * Battery Management Systems * Renewable Energy Equipment * Electrical Distribution Panels * Instrumentation Systems * Process Control Equipment * Embedded Power Electronics * Industrial Control Systems ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade PCB Interconnect Solution ## Manufacturer Phoenix Contact ## Product Family COMBICON PCB Terminal Blocks #PhoenixContact #1714971 #COMBICON #TerminalBlock #PCBTerminalBlock #ScrewTerminal #PowerConnector #IndustrialElectronics #PowerDistribution #IndustrialAutomation #EmbeddedSystems #ControlSystems #ElectronicsDesign #PCBAssembly #ElectricalEngineering

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.300" (7.62mm) 90°, Right Angle Through Hole The 1728853 is a PCB-mounted terminal block header from Phoenix Contact, part of the COMBICON GMSTBA series. It is designed for secure and reliable wire-to-board connections in industrial and electronic applications. This component is a 2-position pluggable terminal block header with male pins, typically used together with a mating plug connector to allow easy wiring and maintenance. It is mounted on a PCB using through-hole soldering and features a right-angle orientation for compact layouts. Key Features Connector Type: PCB terminal block header (male pins) Number of Positions: 2 pins (single row) Pitch: 7.62 mm (0.300") Mounting Type: Through-hole (wave soldering) Orientation: Right-angle (90°) Rated Current: up to 16 A Rated Voltage: up to 630 V (IEC) Contact Material/Finish: Tin-plated contacts Housing Material: Polyamide (PA), green color Flammability Rating: UL94 V-0 Connection System: Pluggable (mates with compatible COMBICON plugs) Typical Applications Industrial control systems Power distribution boards Embedded and automation electronics Devices requiring detachable wiring connections

Mini ISO Relay PCB Socket – 5-position through-hole relay socket designed for automotive electronics, industrial control systems, power distribution modules, automotive ECUs, heavy equipment, and embedded relay-based applications. Part of the TE Connectivity Potter & Brumfield VF4 Series, it is specifically designed for use with VF4-1 and VF4-4 Mini ISO relays, providing a secure and serviceable PCB-mounted relay interface. Features through-hole PCB mounting, PC pin termination, and a compact 5-position socket design that simplifies relay replacement without soldering. Built for reliable operation in demanding automotive and industrial environments, it offers robust mechanical support for high-current relay applications while reducing maintenance time. Supplied in bulk packaging and intended for printed circuit board assembly. #TEConnectivity #VCF41000 #VF4Series #RelaySocket #MiniISORelay #ThroughHole #PCBRelaySocket #AutomotiveElectronics #IndustrialControl #PowerDistribution #EmbeddedSystems

Power Supply Encapsulated PCB 12V 30W IRM-30 Series is a compact 30W AC-DC encapsulated power supply module from Mean Well designed for direct PCB mounting or screw-terminal installation. The module accepts a universal AC input range of 85VAC to 305VAC and provides regulated DC outputs with high efficiency up to 90%. It features Class II isolation, built-in EMI filtering compliant with EN55032 Class B without additional external components, and comprehensive protection functions including short-circuit, overload, and over-voltage protection. With no-load power consumption below 0.1W, reinforced insulation, and a wide operating temperature range, the IRM-30 series is ideal for industrial automation, instrumentation, embedded electronics, smart devices, networking equipment, IoT products, factory automation systems, and handheld electronic devices. Search Keywords: IRM-30, Mean Well IRM-30, AC DC power module, encapsulated power supply, PCB mount power supply, industrial power module, 30W power supply, universal input power supply, AC to DC converter, embedded power supply, isolated power module, IRM-30-5, IRM-30-12, IRM-30-24, IRM-30-48, low standby power supply, Class II power supply, industrial automation power supply, DIN power module alternative, compact AC DC converter Hashtags: #IRM30 #MeanWell #ACDCConverter #PowerSupply #PowerModule #PCBMountPowerSupply #IndustrialElectronics #EmbeddedSystems #FactoryAutomation #IoT #PowerElectronics #SwitchingPowerSupply #SMPS #ElectronicComponents #PCBDesign #UniversalInput #IsolationPowerSupply #IndustrialAutomation #LowPowerConsumption #MeanWellPowerSupply

Audio Connector, designed to provide an interface for audio signal connection in electronic devices. The QingPu WQP-WQP518MA is a compact audio jack connector used for PCB-mounted audio applications. #AudioConnector #AudioJack #Connector #PCBConnector #ElectronicComponent#CommonPartsLibrary #Jack #Audio #Connector

1.5A USB 2.0 1 Bend-in 4P Female -20℃~+70℃ Type-B Plugin USB Connectors ROHS USB-B10-BRW USB-B-TH_USB-B10-BRW LCSC Part Number: C720549 JLCPCB Part Class: Extended Part Manufactured by XUNPU(讯普) USB Type-B female through-hole receptacle XUNPU USB-B10-BRW USB 2.0 Type-B female connector, right-angle through-hole/DIP mounting, 4 contacts, 1 port, 1.5A current rating, 30VDC voltage rating, operating temperature -20°C to +70°C, white housing, RoHS compliant, suitable for USB device ports, embedded electronics, industrial equipment and PCB-mounted USB interfaces. USB-B10-BRW, XUNPU USB-B10-BRW, USB Type-B connector, USB-B female connector, USB 2.0 Type-B socket, right angle USB-B connector, through hole USB connector, DIP USB-B connector, 4 pin USB-B connector, C720549 #USBB10BRW #XUNPU #USBConnector #USBTypeB #USBBFemale #USB20Connector #RightAngleConnector #ThroughHoleConnector #DIPConnector #PCBConnector

The SIM800L is a compact quad-band GSM/GPRS cellular communication module designed for embedded wireless applications requiring voice, SMS, and packet data connectivity. It integrates a complete GSM/GPRS protocol stack and supports communication over standard cellular networks, enabling reliable remote monitoring, control, telemetry, asset tracking, and Internet of Things deployments. The module features low power consumption, a compact surface-mount package, and a UART-based AT command interface for straightforward integration with microcontrollers, processors, and embedded systems. It supports voice calls, SMS messaging, GPRS data transmission, and network services while providing flexible interfacing options for audio and peripheral connectivity. Designed for industrial and consumer electronic applications, the SIM800L delivers dependable wireless communication performance in compact and power-sensitive designs. Its broad network compatibility and extensive software support make it a widely adopted solution for GSM-based connected devices. Features Quad-band GSM/GPRS cellular connectivity Voice call functionality with integrated audio interface SMS text messaging support GPRS packet data communication capability Standard AT command interface UART serial communication interface Low-power operating modes Compact surface-mount package Embedded TCP/IP protocol support Real-time clock functionality DTMF detection and generation Caller identification support SIM card interface integration Antenna interface for cellular communication Wide operating temperature capability Suitable for battery-powered applications Applications Internet of Things devices Remote monitoring systems Wireless telemetry equipment Smart metering solutions Asset tracking systems Vehicle tracking devices Industrial automation equipment Security and alarm systems Wireless data loggers Remote control applications Point-of-sale terminals Embedded communication systems Electrical Characteristics GSM/GPRS cellular network operation Low-voltage power supply architecture Serial UART host interface Integrated RF transceiver SIM card support interface Audio input and output connectivity Low standby power consumption Hardware and software power management support Mechanical Characteristics Compact SMT module package PCB-mountable design Integrated RF connection interface Embedded system integration optimized Lightweight construction Compliance and Reliability GSM standard compliant GPRS standard compliant Industrial embedded communication suitable Designed for long-term operational reliability Compatible with standard cellular infrastructure #commonpartslibrary #wirelesscommunication #gsmmodule #gprs #sim800l #cellularmodule #iot #embeddedsystems #telemetry #wirelessconnectivity #industrialelectronics #communicationmodule #remotecontrol #trackingdevice #machinetomachine #smtmodule