Bluetooth Bluetooth v5.0 Transceiver Module 2.4GHz Integrated, Chip Surface Mount #BLE #IoT #RF #part

Bluetooth Modules - 802.15.1 ISP1507-AX BLE Module with Antenna 512 K Flash/ 64 K Ram - Jedec Tray #commonpartslibrary #bluetooth #module

RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD RF Radio BT ESP ESP32-S3 Espressif onboard PCB antenna ESP32?S3?WROOM?1*

Multiprotocol BLE/ANT/2.4 GHz/802.15.4 Cortex-M4F SoC, nRF52833 module #RF #nRF52833 #BLE #ARM #commonpartslibrary

Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios. #SeeedStudio #xiao

IC RF TxRx + MCU Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 2.412GHz ~ 2.484GHz 56-VFQFN Exposed Pad #wifi #ble #rf #mcu

802.15.4, Bluetooth, WiFi Bluetooth v5.0, Zigbee Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N8 integrates a 32-bit RISC-V single-core processor running up to 160 MHz, along with 8 MB of embedded SPI flash memory. It supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band for improved efficiency and lower latency Bluetooth Low Energy (BLE 5) for short-range communication IEEE 802.15.4 for protocols such as Thread and Zigbee The module features a built-in PCB antenna, RF circuitry, crystal oscillator, and passive components, making it a complete solution that simplifies hardware design. It provides a wide range of GPIO pins and peripheral interfaces such as UART, SPI, I2C, PWM, ADC, and more, enabling flexible integration with sensors and external devices. Designed for low power consumption, it includes multiple power-saving modes, making it suitable for battery-powered applications. Typical Applications Smart home and IoT devices Wireless sensors and control systems Industrial automation Smart lighting and energy management Matter-compatible devices (via Thread support)

Multiprotocol BLE/ANT/2.4 GHz/802.15.4 Cortex-M4F SoC, nRF52840 module #RF #nRF52840 #ARM #BLE #commonpartslibrary

The Photon 2 is a development module with a microcontroller and Wi-Fi networking. The form-factor is similar to the Argon (Adafruit Feather), but the Photon 2 supports 2.4 GHz and 5 GHz Wi-Fi, BLE, and has much larger RAM and flash that can support larger applications. #CommonPartsLibrary #RFEvaluation #DevelopmentBoards #Iot

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 + EDR, Class 1, 2 and 3 Transceiver Module 2.4GHz PCB Trace Surface Mount Wi-Fi + Bluetooth module designed for wireless connectivity in embedded applications, integrating the ESP32 dual-core 32-bit LX6 microprocessor with 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth v4.2 BR/EDR + BLE. It operates from a 3.0 V to 3.6 V supply, features 8 MB SPI flash and 2 MB PSRAM, and provides multiple peripheral interfaces including UART, SPI, I²C, I²S, SD/SDIO, PWM, ADC, DAC, CAN (TWAI®), and Ethernet MAC. #WiFiModule #BluetoothModule #ESP32 #Espressif #2_4GHz #BluetoothLE #BluetoothBR_EDR #DualCore #Embedded #IoT #SPIFlash #PSRAM #UART #SPI #I2C #I2S #SDIO #PWM #ADC #DAC #TWAI #EthernetMAC

The ESP32-DEVKITC-VE evaluation kit from Espressif Systems is a high-performance development platform for RF, RFID, and wireless applications. It features the ESP32-WROVER-E with embedded Xtensa dual-core 32-bit LX6 microprocessor running up to 240 MHz, with 8MB Flash and 8MB PSRAM for efficient data processing. This board supports Wi-Fi 802.11 b/g/n and Bluetooth® Smart Ready 4.x (BLE) connectivity at 2.4GHz, offering wireless communication options. With 448KB ROM, 520KB SRAM, and 16KB SRAM in RTC, it provides ample memory for complex applications. It includes up to 24 GPIOs, SD card, UART, SPI, SDIO, I2C, LED and motor PWM, I2S, IR, pulse counter, capacitive touch sensor, ADC, DAC, and TWAI® (compatible with ISO 11898-1/CAN 2.0) #commonpartslibrary #ESP32-WROVER-E #evaluationboard

- ESP32-C3 Transceiver; 802.11 a/b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth® Smart 4.x Low Energy (BLE) 2.4GHz Evaluation Board #module #ESP32 #transceiver #bluetooth

Bluetooth Low Energy 5.0 SiP module, nRF52832-based, 6.5 x 6.5 x 1.15 mm 52-pad package with optional internal or external antenna The ANNA-B112-01B is an ultra-compact, stand-alone Bluetooth® Low Energy (BLE) 5 module developed by u-blox. It is built around the Nordic nRF52832 SoC, which integrates a powerful Arm Cortex-M4 processor with FPU, RF circuitry, memory, and antenna in a single System-in-Package (SiP). This module is designed for industrial and IoT applications, offering a combination of high performance, low power consumption, and small size. It supports both host-controlled operation (AT commands via u-connectXpress) and standalone embedded applications (open CPU mode), giving designers flexibility in system architecture. 🔑 Key Features 🧠 Processing & Memory 64 MHz Arm Cortex-M4 CPU with FPU 512 KB Flash and 64 KB RAM Supports open CPU (run user firmware directly on module) 📡 Wireless Connectivity Bluetooth 5.0 (BLE) compliant Supports: GATT client & server Bluetooth mesh Simultaneous central + peripheral roles Data rate up to 2 Mbps 📶 RF & Antenna Operates at 2.4 GHz ISM band Integrated chip antenna Optional external antenna via antenna pin Range up to ~160 m (internal antenna) 🔌 Interfaces & Peripherals Communication interfaces: UART, SPI, I²C, I²S Additional features: ADC (12-bit) PWM, PDM Up to 25 GPIOs Supports NFC (for pairing / data) ⚙️ Software & Development Comes with u-connectXpress firmware: AT command interface Serial Port Service (SPS) Easy integration without deep BLE stack knowledge Supports development using: Nordic SDK Arm Mbed Supports FOTA (Firmware Over-The-Air updates) 🔋 Power & Electrical Supply voltage: 1.7V to 3.6V Optimized for low-power applications Sleep current as low as ~300 nA 📦 Physical Characteristics Ultra-compact size: 6.5 × 6.5 × 1.2 mm Package: 52-pin SMD module Operating temperature: –40°C to +85°C 🌍 Certifications Globally pre-certified (FCC, CE, etc.) Reduces time and cost for product certification

Mini 2.45 GHz Antenna The 2450AT18A100E is a high-frequency ceramic SMT antenna featuring a small 3.2 mm × 1.6 mm × 1.3 mm package, optimized for space-constrained RF designs. It operates from 2400 MHz to 2500 MHz with a 50 Ω impedance and provides a compact alternative to traditional PCB trace antennas while maintaining reliable RF performance. Key Features Operating Frequency: 2400 MHz – 2500 MHz (2.4 GHz ISM Band) Center Frequency: 2450 MHz Antenna Type: Mini Ceramic Chip Antenna / SMT RF Antenna Package Size: 3.2 mm × 1.6 mm × 1.3 mm Impedance: 50 Ω Peak Gain: Approximately +0.5 dBi (typical) Average Radiation Efficiency: Approximately 76% (based on Johanson evaluation board) Maximum Input Power: 2 W continuous wave (CW) Operating Temperature Range: -40 °C to +125 °C Mounting Type: Surface Mount Technology (SMT) Applications: Bluetooth / BLE devices Wi-Fi 2.4 GHz modules Zigbee / IEEE 802.15.4 systems IoT sensors and embedded wireless products #2450AT18A100E #JohansonTechnology #ChipAntenna #SMTAntenna #RFDesign #2GHzAntenna #Bluetooth #WiFi #Zigbee #IoT #WirelessCommunication #EmbeddedSystems #PCBDesign #RFAntenna #Antena #Chip #SurfaceMount

- ESP32-WROOM-32UE Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth® Smart Ready 4.x Dual Mode 2.4GHz Evaluation Board The ESP32-DEVKITC-32UE is a development board based on the ESP32 series SoC designed by Espressif. It is widely used for IoT, embedded systems, and wireless communication applications due to its built-in Wi-Fi and Bluetooth capabilities. Microcontroller: ESP32 dual-core Tensilica LX6 processor Wireless Connectivity: Wi-Fi (802.11 b/g/n) and Bluetooth (Classic + BLE) Flash Memory: Integrated SPI flash (varies by module version) Development Interface: USB-to-UART bridge for easy programming and debugging Power Supply: Typically powered via USB or external 5V input GPIO Pins: Multiple multifunction GPIOs supporting ADC, DAC, PWM, SPI, I2C, UART, etc. Supports deep sleep and ultra-low power modes Multiple peripheral interfaces (SPI, I2C, UART, SDMMC, PWM) Compatible with ESP-IDF, Arduino IDE, and MicroPython Built-in antenna (UE variant uses U.FL or external antenna option depending on module design) IoT devices and smart home systems Wireless sensor networks Data logging and monitoring systems Robotics and automation Embedded control systems #commonpartslibrary #developmentboard #esp32 #wroom

Wireless MCU with Integ Tri-radio 1x1 Wi-Fi 6 + BLE Low Energy 5.4 / 802.15.4 TFBGA145 package #CommonPartsLibrary #IntegratedCircuit #RF-transceiver

ESP32-C3-MINI-1 ESP32-C 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board ESP32-C3-DevKitM-1 is a compact entry-level development board from Espressif Systems based on the ESP32-C3-MINI-1 module. It integrates a 32-bit RISC-V single-core microcontroller, 2.4 GHz Wi-Fi, and Bluetooth Low Energy (BLE) connectivity, making it suitable for IoT devices, embedded applications, smart sensors, and wireless control projects. The board exposes most GPIO pins through headers for easy prototyping and supports programming through USB. Key Features: 32-bit RISC-V Single-Core Processor Based on ESP32-C3 SoC architecture Clock frequency up to 160 MHz Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy (BLE) support Memory 4 MB embedded Flash memory inside the ESP32-C3-MINI-1 module GPIO and Peripheral Interfaces Multiple programmable GPIO pins Supports interfaces such as: SPI UART I²C I²S PWM ADC USB Serial/JTAG Development Board Features Built-in ESP32-C3-MINI-1 module with PCB antenna USB interface for programming and power 5 V to 3.3 V onboard voltage regulator Breadboard-friendly pin headers Applications IoT gateways Smart home devices Wireless sensors Industrial automation Wearable electronics Embedded control systems #ESP32C3 #ESP32 #DevKitM1 #Espressif #RISCVD #WiFiMCU #BluetoothLE #IoT #EmbeddedSystems #Microcontroller #WirelessModule #SmartDevices #ElectronicsDesign #Prototyping