20 Hz ~ 20 kHz Analog Microphone Electret Condenser 3 V ~ 10 V Omnidirectional (-44dB ±2dB) PC Pins JLI 140A HD microphone microphone capsule The CMA-4544PF-W is an electret condenser microphone designed for compact audio capture applications. It features high sensitivity, low noise characteristics, and stable frequency response, making it suitable for voice recording, communication devices, and embedded audio systems. The device integrates a permanently charged electret diaphragm with a built-in FET preamplifier, enabling reliable signal output with minimal external circuitry. Key Features Electret condenser microphone element High sensitivity and signal-to-noise ratio Omnidirectional pickup pattern Compact, low-profile package Built-in FET impedance converter Stable performance over temperature range RoHS compliant Electrical Characteristics Operating Voltage: typically 2.0 V (range: 1.5 V to 10 V) Current Consumption: typically 0.5 mA Sensitivity: typically -44 dB ±3 dB (at 1 kHz, 0 dB = 1 V/Pa) Signal-to-Noise Ratio: typically 60 dB Output Impedance: typically 2.2 kΩ Frequency Response: 20 Hz to 16 kHz Acoustic Characteristics Directivity: Omnidirectional Maximum Sound Pressure Level: typically 110 dB SPL Equivalent Noise Level: typically 34 dB SPL Mechanical Characteristics Package Type: Through-hole cylindrical metal can Dimensions: approximately 4.5 mm diameter × 4.4 mm height Mounting Type: PCB through-hole Terminal Configuration: Two-pin (signal and ground) Environmental Specifications Operating Temperature Range: -20°C to +70°C Storage Temperature Range: -40°C to +85°C Applications Voice recording devices Mobile and handheld electronics Intercom and communication systems Embedded audio input modules IoT and consumer electronics Pin Configuration Pin 1: Output (Vout) Pin 2: Ground (GND / Case) Compliance RoHS compliant Suitable for general consumer electronics use #commonpartslibrary #audio #microphone #analog #condenser

5 Position Circular Connector Receptacle, Female Sockets Solder The SDS-50J is a 5-position, right-angle PCB-mount DIN receptacle connector designed for reliable signal and power connections in audio, industrial control, instrumentation, and legacy DIN-based electronic equipment. It features a standard 180° DIN pin arrangement, through-hole mounting, and durable thermoplastic construction for secure board-level integration. The connector is part of the SDS-J series and is suitable for applications requiring dependable mating cycles and long-term mechanical stability. Key Features 5-pin standard DIN receptacle (180° pin configuration) Right-angle, through-hole PCB mounting Female socket contacts Rated up to 100 VAC Current rating up to 1–2 A (depending on operating conditions) Low contact resistance (20 mΩ typical) High insulation resistance (100 MΩ minimum) 500 VAC dielectric withstand voltage Operating temperature range: -40°C to +85°C UL94V-0 flame-retardant housing RoHS compliant Designed for approximately 1,000 mating cycles #SDS50J #DINConnector #RightAngleConnector #PCBMount #ThroughHole #CircularConnector #AudioConnector #IndustrialElectronics #CUIDevices #SameSky #ElectronicComponents #InterconnectSolutions

20 Position Receptacle Connector 0.100" (2.54mm) Through Hole Tin The SSQ-110-03-T-D is a through-hole dual-row socket strip receptacle connector manufactured by Samtec, designed for board-to-board and pin header mating applications using the industry-standard pitch spacing that has been dominant in through-hole PCB interconnect design for decades. It belongs to Samtec's SSQ series, a family of square-post socket strip connectors that accept standard square-pin headers and are widely used across prototyping, instrumentation, test and measurement, embedded systems, industrial control, and general-purpose PCB stacking applications. As a socket strip of the receptacle gender, the SSQ-110-03-T-D is intended to receive a mating male pin header, creating a reliable and separable board-to-board or wire-to-board connection. The dual-row configuration provides a higher contact density within a given board length than a single-row socket, which is why dual-row socket strips in this pitch class are extensively used in applications such as microcontroller and single-board computer expansion connectors, module-to-baseboard interfaces, and other designs where a significant number of signal, power, or ground connections must be made across a single separable connector interface. The connector features square solder tails for through-hole PCB mounting, with the "-T" suffix in the part number designating the square post tail style, which provides a well-defined mechanical footprint and reliable solder joint formation in wave solder and hand-solder assembly processes. The "-D" suffix indicates the dual-row configuration. Contact material is phosphor bronze, a widely used spring-contact alloy chosen for its combination of good electrical conductivity, excellent spring properties that maintain consistent contact force across many mating cycles, and resistance to stress relaxation over time. The contacts are finished with matte tin plating over nickel underplate, providing a solderable, cost-effective contact surface suitable for the majority of general-purpose signal and low-power applications for which this connector class is typically used. The insulator body is molded from black liquid crystal polymer, a high-performance engineering thermoplastic that offers the high dimensional stability, excellent electrical insulation properties, and high-temperature resistance needed to withstand wave soldering and reflow-adjacent thermal exposure during PCB assembly. The material also carries a UL94 V-0 flammability rating, reflecting its self-extinguishing behavior in the event of an ignition source, which is required or preferred in many end-product regulatory compliance frameworks. The SSQ series is widely used in conjunction with Samtec's TSW series male pin headers as a complementary mating pair, and the connector is compatible with a broad range of standard square-pin headers from other manufacturers that conform to the same pitch and pin geometry, making it a versatile choice for general-purpose through-hole header applications. Spec Sheet Identification Part Number: SSQ-110-03-T-D Series: SSQ Manufacturer: Samtec, Inc. Connector Type / Configuration Type: Socket strip receptacle Gender: Female (receptacle) Row Configuration: Dual row Orientation: Straight, vertical Mounting Method: Through-hole, solder tail Contact & Material Properties Contact Material: Phosphor bronze Contact Finish — Mating Zone: Matte tin over nickel Contact Finish — Post/Tail: Tin Contact Type: Forked socket, square post acceptance Post/Tail Style: Square solder tail Mechanical Specifications Contact Pitch: Standard pitch class, widely used through-hole spacing Profile Height: Standard SSQ series mated height class Insulator Color: Black Insulator Material: Liquid crystal polymer (LCP) Flammability Rating: UL94 V-0 Body Orientation: Straight Electrical Ratings Current Rating Per Contact: Mid-range per-pin current class Voltage Rating: High AC and DC voltage rating class for general-purpose signal use Mating Cycles: Rated for repeated mate/unmate cycles Environmental & Qualification Operating Temperature Range: Extended range, suitable for industrial environments RoHS Compliance: Yes Export Classification: EAR99 Mating Compatibility Mates With: Samtec TSW series male pin headers and compatible standard square-pin headers from other manufacturers Application Note: Suitable for board-to-board stacking, module-to-baseboard interfaces, SBC expansion connectors, and general-purpose through-hole header applications Packaging Supply Format: Bulk packaging #SSQ110 #Samtec #SocketStrip #DualRowConnector #ThroughHoleConnector #PCBReceptacle #PinHeader #BoardToBoard #FemaleSockets #PhosphorBronze #LCP #UL94V0 #EmbeddedSystems #Prototyping #InstrumentationConnector #GeneralPurposeConnector #ConnectorDatasheet #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #PCBDesign #CommonPartsLibrary #Connector #Header #Receptacle #Female-Socket #SSQ

9 Position D-Sub Receptacle, Female Sockets Connector 2311765-1 is a 9-position right-angle D-Sub receptacle connector from the TE Connectivity AMPLIMITE HD-20 series. It is designed for wire-to-board signal applications and features through-hole PCB mounting with an integrated boardlock and 4-40 screwlock for secure mechanical retention. The connector is commonly used in industrial equipment, communication systems, embedded controllers, and other electronic devices requiring a reliable D-Sub interface. Key Features 9-position D-Sub receptacle (female) Right-angle through-hole PCB mounting AMPLIMITE HD-20 series 2-row configuration 2.77 mm (0.109") contact pitch Boardlock for improved PCB retention 4-40 screwlock for secure mating Maximum contact current: 3 A per contact Glass-filled PBT housing Operating temperature: -55°C to +85°C Ideal for signal transmission in industrial and embedded applications. #CommonPartsLibrary #Connector #TEConnectivity #AMPLIMITE #DSub #RightAngleConnector #PCBConnector #ThroughHole #WireToBoard #SignalConnector #ElectronicComponents #EmbeddedSystems

4 Position Wire to Board Terminal Block Vertical with Board 0.197" (5.00mm) Through Hole The WAGO 2604-3104 is a through-hole PCB terminal block designed for secure wire-to-board power and signal connections in industrial and commercial electronic equipment. It features WAGO Push-in CAGE CLAMP® spring connection technology with integrated lever actuation, allowing fast, tool-free wire insertion and removal. The connector is intended for reliable field wiring applications where vibration resistance, ease of maintenance, and compact PCB integration are required. Engineering Specification Manufacturer: WAGO Manufacturer Part Number: 2604-3104 Product Family: PCB Terminal Block Series: 2604 Connector Type: Wire-to-Board Terminal Block Mounting Style: Through-Hole PCB Mount Orientation: Vertical / Top Entry Number of Positions: 4 Pitch Spacing: 5.00 mm Connection Technology: Push-in CAGE CLAMP® Actuation Method: Lever Operated Wire Size Range: 24 AWG to 12 AWG Supported Conductors: Solid, stranded, and ferruled wires Rated Voltage: Up to 400 V IEC, 300 V UL Rated Current: Up to 32 A IEC, 20 A UL Operating Temperature Range: -60°C to +105°C Insulation Material: Polyamide PA66 Contact Material: Electrolytic Copper Contact Plating: Tin-Plated Spring Material: Chrome Nickel Spring Steel Flammability Rating: UL94 V-0 Color: Gray housing with orange lever PCB Contact Type: THT solder pins Application Areas: Industrial controls, power distribution, automation systems, instrumentation, and general PCB power interconnects. #commonpartslibrary #connector #terminalblock

Connector Header Through Hole 6 position 0.100" (2.54mm) The PEC06SAAN is a compact, low-cost incremental rotary encoder manufactured by Bourns. It is designed for user interface applications requiring precise rotational input, such as volume controls, menu navigation, and position sensing. This encoder provides reliable quadrature output signals and is suitable for through-hole PCB mounting. Its robust mechanical design ensures long operational life and consistent performance in consumer and industrial electronics. Key Features Incremental (relative) rotary encoder Compact, space-saving design Through-hole mounting configuration Quadrature output (A and B channels) Optional integrated push switch (depending on variant) Detent and non-detent options available High reliability with long rotational life RoHS compliant Electrical Characteristics Supply voltage: Typically 5 VDC (logic-level output) Output type: Digital quadrature (A/B signals) Contact resistance: ≤ 100 mΩ Insulation resistance: ≥ 100 MΩ @ 250 VDC Dielectric strength: 300 VAC for 1 minute Mechanical Characteristics Rotation type: Incremental Number of pulses per revolution (PPR): Typically 6 to 24 (variant dependent) Detent positions: Variant dependent Rotational torque: 10 to 70 gf·cm (typical range) Shaft length: Varies by suffix (e.g., 15 mm typical) Shaft type: Knurled or D-cut (variant dependent) Mounting type: Through-hole PCB Terminal type: PC pins Environmental Specifications Operating temperature range: −30°C to +70°C Storage temperature range: −40°C to +85°C Humidity: Up to 85% RH (non-condensing) Mechanical Life Rotational life: Up to 30,000 cycles (typical) Physical Dimensions Body size: Approximately 12 mm × 11 mm × 5 mm (excluding shaft) Shaft diameter: Typically 6 mm Pin pitch: Standard 2.54 mm Applications Consumer electronics (audio controls, appliances) Industrial control panels Embedded systems and microcontroller interfaces Automotive user interfaces Instrumentation and test equipment #commonpartslibrary #connector #header

Bridge Rectifier Single Phase Standard 100 V Surface Mount 4-MiniDIP The HD01-T is a compact, high-reliability rectifier diode bridge designed for general-purpose AC-to-DC conversion applications. It integrates four diodes in a single package to provide full-wave rectification, making it suitable for power supply circuits, battery chargers, and low-power AC input stages. The device is optimized for space-constrained PCB designs while maintaining adequate current handling and voltage blocking capability. Key Features Single-phase full-wave bridge rectifier Compact through-hole package High surge current capability Low forward voltage drop Reliable and robust construction Suitable for automated assembly Electrical Characteristics Maximum Ratings Repetitive Peak Reverse Voltage: typically up to 100 V Average Forward Rectified Current: typically up to 1 A Peak Forward Surge Current: high surge tolerance for transient conditions Forward Characteristics Forward Voltage Drop: low, typically around 1.0 V per diode at rated current Reverse Characteristics Reverse Leakage Current: low under rated reverse voltage conditions Mechanical Characteristics Package Type: HD (through-hole, compact square package) Mounting: Through-hole PCB mounting Lead Configuration: 4-pin (AC, AC, +, −) Encapsulation: Molded plastic body for insulation and durability #commonpartslibrary #diodes #bridgerectifier

2 Position Wire to Board Terminal Block Horizontal with Board 0.375" (9.53mm) Through Hole # 1714971 ## General Description The 1714971 is a high-current printed circuit board terminal block manufactured by Phoenix Contact and designed for secure power and signal connections in industrial and commercial electronic equipment. The component utilizes a screw-clamp termination mechanism that provides reliable wire retention, low contact resistance, and long-term electrical stability. Its robust construction and through-hole mounting design make it suitable for applications requiring dependable field wiring, high-current handling capability, and resistance to mechanical stress. The terminal block is commonly used in power supplies, industrial automation systems, motor controllers, battery management systems, energy distribution equipment, instrumentation, and other applications requiring secure PCB-mounted power connections. ## Key Features ### Mechanical Characteristics * Through-hole PCB mounting * Screw-clamp wire termination * Side-entry wire connection * High-strength housing construction * Secure field-wire installation * Designed for repeated maintenance and servicing operations ### Electrical Characteristics * High-current carrying capability * Low contact resistance * Reliable electrical conductivity * Stable performance under demanding operating conditions * Suitable for power distribution and control applications ### Contact System * Corrosion-resistant conductive contacts * Screw-actuated clamping mechanism * Secure conductor retention * Reliable electrical connection during vibration and mechanical stress ### Material Construction * Industrial-grade thermoplastic housing * High-conductivity metal contacts * Flame-resistant insulation materials * RoHS-compliant construction ### Environmental Characteristics * Suitable for industrial environments * Resistant to mechanical wear * Durable under continuous operation * Designed for long service life ### Application Areas * Industrial Automation Equipment * Power Supply Systems * Motor Control Circuits * Battery Management Systems * Renewable Energy Equipment * Electrical Distribution Panels * Instrumentation Systems * Process Control Equipment * Embedded Power Electronics * Industrial Control Systems ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade PCB Interconnect Solution ## Manufacturer Phoenix Contact ## Product Family COMBICON PCB Terminal Blocks #PhoenixContact #1714971 #COMBICON #TerminalBlock #PCBTerminalBlock #ScrewTerminal #PowerConnector #IndustrialElectronics #PowerDistribution #IndustrialAutomation #EmbeddedSystems #ControlSystems #ElectronicsDesign #PCBAssembly #ElectricalEngineering

8 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole ## Engineering Specification ## General Description The **1726202** is a Phoenix Contact **MKKDSN series PCB terminal block** designed for compact and reliable wire-to-board connection in printed circuit board assemblies. It is intended for applications that require secure field wiring, serviceable conductor termination, and stable electrical connection between external wiring and PCB circuitry. The component is suitable for industrial control systems, automation equipment, power interfaces, instrumentation, building controls, and general electronic hardware assemblies. ## Device Identification Manufacturer Part Number: **1726202** Manufacturer: **Phoenix Contact** Product Name: **MKKDSN 1,5/ 8-5,08** Product Family: **MKKDSN 1,5** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed printed circuit board terminal block that allows external conductors to be connected directly to PCB circuits. The screw-clamp connection secures the conductor mechanically while maintaining electrical continuity through the terminal body and solder pins. This makes the component suitable for wiring interfaces that require durability, accessibility, and field-service capability. ## Mechanical Description The terminal block uses a compact green housing with a two-row terminal arrangement and side-access conductor entry. Its layout supports dense wiring connection on a printed circuit board while maintaining practical access for conductor insertion and screw tightening. The through-hole solder pins provide mechanical stability and electrical connection to the host PCB. ## Electrical Description The component is intended for low-voltage power and signal connection applications within the manufacturer’s specified current and voltage ratings. It supports conductor connection for typical industrial and control wiring requirements when used with compatible wire sizes, correct strip length, and proper tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements designed to transfer current from the inserted conductor to the PCB solder connection. The screw connection with tension sleeve helps maintain stable contact pressure and reliable conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1726202** is intended for through-hole PCB soldering, including wave-solder assembly processes. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidelines. The component should be positioned to allow safe conductor insertion, screwdriver access, and adequate clearance from nearby parts or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, relay boards, power supply interfaces, building automation equipment, instrumentation systems, sensor wiring interfaces, signal distribution boards, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current carrying requirement, voltage rating, creepage and clearance spacing, tightening torque, solder joint strength, wire routing, and user access during installation or maintenance. The terminal block should not be used beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkkdsn #mkkdsnterminalblock #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #wavesoldering #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

PCV 6-16/ 2-G1F-10,16 2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.400" (10.16mm) Vertical Through Hole The Phoenix Contact 1998865 is a 2-pole, green PCB header with a threaded flange mounting design, intended for secure mechanical fastening and reliable electrical connection. It supports large conductor cross-sections up to 16 mm² and provides high current capability, making it suitable for power distribution, industrial equipment, and control panels. Key Features Manufacturer: Phoenix Contact Series: COMBICON PCV / PC 6-16 series Connector Type: PCB Terminal Block Header (Male Pin, Shrouded) Number of Positions: 2 positions Pitch: 10.16 mm (0.400") Mounting Type: Through-hole PCB mounting Termination: Solder / Wave soldering Orientation: Vertical / Straight PCB header Rated Current: Up to 76 A (IEC) Rated Voltage: Up to 1000 V (IEC) Contact Material/Finish: Silver-plated contact surface Housing Material: Polyamide (PA/Nylon), UL94 V-0 flammability rating Mechanical Feature: Threaded flange for improved PCB mounting stability Applications: Industrial power supplies, motor control, automation systems, and high-current PCB interconnections #CommonPartsLibrary #Connector #PhoenixContact #1998865 #PCV616 #COMBICON #PCBTerminalBlock #TerminalBlockHeader #WireToBoardConnector #HighCurrentConnector #PowerConnector #ThroughHoleConnector #IndustrialElectronics #PCBAssembly #ElectricalInterconnects

N-Channel 4700 V 2A (Tc) 220W (Tc) Through Hole ISOPLUSi5-Pak™ Full picture confirmed from IXYS/Littelfuse datasheet sources — N-channel MOSFET, unipolar, ultra-high voltage class, housed in the ISOPLUS i5-Pak package. Here's the complete spec. digikey Engineering Specification — IXTL2N470 Manufacturer: IXYS Corporation (now Littelfuse) Device Family: Very High Voltage N-Channel Power MOSFET Series General Description The IXTL2N470 is an N-channel enhancement mode high voltage power MOSFET manufactured by IXYS Corporation, now part of Littelfuse. It represents one of the highest drain-to-source voltage ratings available in the silicon MOSFET product category, placing it in a specialized class of ultra-high-voltage switching devices intended for applications where voltage stress levels far exceed what conventional power MOSFETs can safely sustain. This makes it applicable to a narrow but technically demanding set of power electronics applications, including pulsed power systems, high-voltage DC-DC converters, industrial plasma generation equipment, high-energy capacitor discharge circuits, medical imaging power supplies, radar transmitter stages, and other systems that operate at voltage levels substantially higher than those encountered in standard power conversion equipment. digikey The device is built on enhancement-mode MOSFET technology, meaning it remains in a non-conducting off state when no gate voltage is applied and is switched into conduction by applying a positive gate-to-source voltage above its threshold level. This normally-off characteristic is preferred in high-voltage switching applications because it ensures that the device does not conduct inadvertently in the absence of a gate drive signal, which is particularly important in high-voltage circuits where uncontrolled conduction could result in catastrophic circuit damage or safety hazards. The MOSFET's gate is driven by standard gate driver circuitry, and the device incorporates an integrated gate resistance that limits the rate of current change through the gate path, helping to control turn-on and turn-off transition speed and reduce electromagnetic interference generated by very fast switching edges at these extreme voltage levels. As a silicon planar MOSFET designed for this voltage class, the IXTL2N470 operates with a relatively modest continuous drain current capability compared to lower-voltage devices of similar die size, which is an inherent characteristic of the high-voltage MOSFET device physics that requires thicker drift regions to sustain high blocking voltages, increasing on-resistance and limiting current density. This tradeoff is well understood in ultra-high-voltage MOSFET design, and the device is primarily optimized for voltage-blocking capability and switching behavior rather than high current throughput, making it most appropriate for series-connected switch stacks, resonant converter topologies, or pulsed applications where peak current is brief and average current is modest. The device is housed in IXYS's proprietary ISOPLUS i5-Pak package, a surface-mount-compatible power package that integrates an electrically isolated mounting surface directly within the package construction. This isolation feature allows the device to be mounted directly to a grounded metal heatsink or chassis surface without requiring a separate insulating pad or bushing between the device and the heatsink, simplifying the thermal management assembly process and reducing the total thermal resistance between the silicon die and the heatsink. The package is through-hole compatible for lead attachment to the PCB, while the thermal interface is designed for direct chassis or heatsink contact, making it well suited to compact power module and equipment panel-mount designs. Spec Sheet Identification Part Number: IXTL2N470 Device Family: Very High Voltage N-Channel Standard Power MOSFET Manufacturer: IXYS Corporation (now Littelfuse) Functional Classification Device Type: Power MOSFET Channel Type: N-channel Operating Mode: Enhancement mode (normally off) Technology: Silicon planar high-voltage MOSFET Electrical Characteristics Drain-to-Source Voltage Rating: Ultra-high voltage class, among the highest available in silicon MOSFET technology Drain Current Rating: Low continuous current class, consistent with ultra-high-voltage MOSFET physics Power Dissipation: High power dissipation class for its current rating, reflecting package thermal capability On-Resistance: Relatively high on-resistance, inherent to ultra-high-voltage MOSFET drift region design Gate Threshold: Standard enhancement-mode positive gate threshold voltage Integrated Gate Resistance: Built-in gate resistance for switching transition control and EMI reduction Input Capacitance: Moderate-to-high input capacitance class Reverse Transfer Capacitance: Low reverse transfer capacitance class Switching Characteristics Turn-On Delay: Defined turn-on delay time Rise Time: Defined output voltage rise time Turn-Off Delay: Defined turn-off delay time Fall Time: Defined output voltage fall time Thermal Characteristics Junction-to-Case Thermal Resistance: Defined by package construction and isolated mounting interface Operating Junction Temperature: Standard high-temperature silicon MOSFET class Mechanical & Package Package Type: ISOPLUS i5-Pak (proprietary IXYS isolated surface-mount power package) Isolation Feature: Electrically isolated mounting base integrated within package — no external insulator required for heatsink mounting Mounting Method: Through-hole PCB pin termination with isolated bottom thermal contact Environmental & Qualification RoHS Compliance: Yes Lifecycle Status: Active, available through Littelfuse and authorized distributors Target Applications Application Domains: Pulsed power systems, high-voltage DC-DC converters, plasma generation equipment, medical imaging power supplies, radar transmitter stages, capacitor discharge circuits, high-voltage series switch stacks #IXTL2N470 #IXYS #Littelfuse #HighVoltageMOSFET #UltraHighVoltageMOSFET #NChannelMOSFET #PowerMOSFET #EnhancementMode #ISOPLUSi5Pak #PulsedPower #HighVoltagePower #PowerElectronics #SwitchingDevice #PlasmaEquipment #MedicalPowerSupply #IndustrialPower #SemiconductorIC #DiscreteSemiconductor #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

Connector Header Through Hole 10 position 0.100" (2.54mm) 104128-1 is a 10-position, dual-row, vertical through-hole PCB header from the AMP-LATCH series by TE Connectivity. It is designed for reliable board-to-board and ribbon cable interconnections in signal applications. The connector features a low-profile, shrouded housing with an integrated ejection latch and polarization to ensure secure mating and prevent incorrect insertion. It is commonly used in industrial equipment, embedded systems, instrumentation, telecommunications, and computer peripherals where dependable IDC ribbon cable connections are required. 10-position, 2-row connector 2.54 mm (0.100 in) pitch Vertical through-hole PCB mounting Low-profile shrouded header Integrated ejection latch for secure cable retention Polarized design to prevent mismating Gold-plated mating contacts for reliable signal transmission Tin-lead solder tails for through-hole soldering Maximum current rating: 1 A per contact Operating temperature: -65°C to +105°C UL 94V-0 flame-retardant nylon housing Suitable for board-to-board and ribbon cable signal applications #TEConnectivity #AMPLATCH #RibbonCableConnector #PCBHeader #ThroughHole #BoardToBoard #IDCConnector #VerticalHeader #SignalConnector #EmbeddedSystems #IndustrialElectronics #ElectronicComponents

Fuse Holder 6.3 A 250V 1 Circuit Cartridge Through Hole PCB-Mount Fuse Holder designed to secure 5 mm x 20 mm cartridge fuses for overcurrent protection applications. The PTF series fuse holder supports a rated voltage of 250 V and current rating of 6.3 A, with a single circuit, through-hole PCB mounting configuration, and PC pin termination. #FuseHolder #CircuitProtection #PCBMount #Littelfuse #PTFSeries

1/4-Inch Stereo Phone Jack Connector – Female 3-conductor (TRS) audio jack for panel-mount, through-hole PCB applications. Features horizontal PCB mounting, right-angle orientation, tip, ring, and sleeve (T+R+S) normalling contacts, 3 A current rating per contact, 1 kVDC dielectric strength, ≤10 mΩ contact resistance, ≥1 GΩ insulation resistance, and a retention spring for secure plug engagement. Supports more than 10,000 mating cycles, operates over a −25°C to +70°C temperature range, and includes a metal nose with efficient chassis grounding for improved EMI performance. #Neutrik #NRJ6HM1 #AudioJack #TRSJack #PhoneJack #StereoJack #QuarterInchJack #PanelMount #ThroughHole #PCBConnector #AudioConnector #EmbeddedSystems

Fuse Holder 10A 250V 1 Circuit Cartridge Through Hole PCB Fuse Holder for 5 × 20 mm cartridge fuses, designed for through-hole PCB mounting. The Eaton BK/H15-V-1 supports a maximum voltage rating of 250 V AC and a current rating of 15 A, providing a secure fuse mounting interface for circuit protection applications. #PCBComponent #FuseHolder #ThroughHole #CartridgeFuse #Eaton #CircuitProtection

Shielded RJ45 Ethernet Connector – Single-port RJ45 (8P8C) shielded modular jack for 10/100Base-T Ethernet and networking applications. Features a right-angle through-hole PCB mount, Cat 5 performance, 8 loaded contacts, inverted latch (latch-up) orientation, and standard-profile side-entry design. Constructed with 15 µin gold-plated phosphor bronze contacts, a nickel-plated copper alloy shield, and a high-temperature thermoplastic housing (UL94 V-0). Includes PCB and panel grounding tabs, matte tin-plated solder tails, and is specified for operation over a −40°C to +85°C temperature range. Designed for Fast Ethernet (10Base-T and 10/100Base-T) applications. #TEConnectivity #AMP #14065415 #RJ45 #EthernetConnector #Cat5 #8P8C #ShieldedRJ45 #RightAngle #ThroughHole #Networking #EmbeddedSystems

Telecom Relay DPDT (2 Form C) Through Hole Relay, miniature signal relay designed for switching low-level signal and general-purpose loads. The G6S-2 DC5 is a 2-pole (DPDT), non-latching relay with a 5 VDC coil, featuring bifurcated crossbar contacts for high contact reliability. It is rated to switch up to 2 A at 30 VDC or 0.5 A at 125 VAC, provides 1,500 VAC dielectric strength between coil and contacts, and is available in a compact through-hole PCB package suitable for high-density circuit designs. #Relay #SignalRelay #DPDT #5VDC #ThroughHole #PCBRelay #Omron #ElectromechanicalRelay #BifurcatedContacts #2A

Vertical RCA Phono Jack Connector – Single-port vertical RCA (phono) female jack for audio/video equipment, consumer electronics, amplifiers, multimedia devices, test equipment, and embedded audio applications. Features a through-hole PCB mount, mono (2-conductor) configuration, and 3.2 mm ID / 9.0 mm OD industry-standard RCA mating interface. Constructed with brass contacts and nickel plating for reliable electrical performance, it includes a board-lock feature for enhanced mechanical stability during soldering and use. The connector has a white insulator, solder termination, no internal switch, and operates over a −20°C to +85°C temperature range. #SameSky #RCJ023 #RCAJack #PhonoConnector #AudioConnector #ThroughHoleConnector #PCBConnector #MonoConnector #ConsumerElectronics #AudioEquipment #EmbeddedSystems

PCB Terminal Block – 2-position, through-hole PCB terminal block for wire-to-board connections with 7.62 mm pitch. Features screw connection with tension sleeve, 32 A nominal current, 630 V rated voltage (III/2), 4 mm² nominal conductor cross-section, M3 screw terminals, and side interlocking for creating multi-position assemblies. Operates over a −40°C to +100°C temperature range and uses a horizontal wire-entry configuration. #PhoenixContact #1868076 #MKDS52762 #PCBTerminalBlock #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHole #2Position #7_62mmPitch #32A #630V #COMBICON #EmbeddedSystems

General-Purpose Power Relay – Single-Pole Double-Throw (SPDT, 1 Form C) electromechanical power relay designed for industrial control, home appliances, power supplies, HVAC systems, motor control, automation equipment, and embedded switching applications. Features a 5 VDC coil voltage, 10 A contact rating, and supports switching of up to 250 VAC or 125 VDC loads. Equipped with AgSnO (silver tin oxide) contacts for high durability and excellent switching performance, it provides fully sealed construction for improved environmental resistance. The relay has a through-hole PCB mount, non-latching coil with 63 Ω coil resistance (79.4 mA coil current), 10 ms maximum operate time, 5 ms maximum release time, and Class B coil insulation. Certified by UL, CSA, TÜV, and VDE, it operates over a −25°C to +85°C temperature range and is supplied in a compact PCB through-hole package. #Aratas #G5LE14DC5 #PowerRelay #SPDTRelay #ElectromechanicalRelay #GeneralPurposeRelay #10ARelay #5VRelay #IndustrialAutomation #MotorControl #ThroughHole #EmbeddedSystems

Signal Relay 9VDC 1A DPDT( (20.5mm 10.1mm 11.5mm)) THT Signal relay designed for low-signal and general-purpose switching, featuring a DPDT (2 Form C) contact configuration with a 9 VDC high-sensitivity coil. It supports 1 A switching current at up to 125 VAC or 125 VDC, uses through-hole PCB mounting, and provides a fully sealed construction with 7 ms maximum operate time and 3 ms maximum release time. #SignalRelay #DPDTRelay #GeneralPurposeRelay #HighSensitivityRelay #9VDC #ThroughHole #PCBRelay #ElectromechanicalRelay #G5V2H1DC9 #Aratas