Through-hole female socket header providing a single-row board-to-board or wire-to-board interconnect. Features 19 positions on a 2.54 mm (0.100") pitch, gold-plated contacts, and is rated for 2.9 A per contact and 550 VAC RMS. #ThroughHole #FemaleHeader #SocketHeader #SingleRow #19Position #2.54mmPitch #GoldPlatedContacts #BoardToBoard #WireToBoard #2.9APerContact #550VAC #Samtec

Connector Header Through Hole 2 position 0.098" (2.50mm) Nano-Fit Vertical Header Connector designed for through-hole PCB power connections, featuring a single-row, 2-circuit configuration with 2.50 mm pitch and kinked pins. It uses a vertical orientation, male contacts with 0.38 µm gold plating on the mating interface, tin-plated termination, black LCP housing, and supports an operating temperature range of -40°C to +125°C. #Connector #PowerConnector #HeaderConnector #ThroughHole #NanoFit #Molex #1053091202

19 Position Header Connector 0.100" (2.54mm) Through Hole Tin 1x19 pin header 2.54mm This component is a single-row female header connector designed for general-purpose board-to-board and wire-to-board interconnections. It provides a reliable and cost-effective solution for standard pitch connectivity in electronic assemblies. The connector is commonly used in prototyping, development boards, and production systems where modular connections and ease of assembly are required. Its design supports compatibility with standard male pin headers, making it suitable for a wide range of applications in industrial, consumer, and embedded electronics. Key Features The connector features a single-row configuration with standard pitch spacing, enabling compatibility with widely used pin header systems. It is constructed with durable insulating material and conductive contacts that provide stable electrical performance. The contacts are designed to ensure consistent mating force and reliable signal transmission. The component supports through-hole mounting for strong mechanical retention and ease of soldering. Its construction allows repeated mating cycles while maintaining contact integrity. Electrical Characteristics The connector is designed to support typical signal and low-power applications in electronic circuits. It provides consistent electrical contact with low contact resistance and stable conductivity under normal operating conditions. The materials and plating are selected to ensure reliable performance over time, minimizing oxidation and degradation during use. Mechanical and Material Characteristics The housing is made from a high-temperature thermoplastic material suitable for standard soldering processes. The contacts are formed from conductive metal alloy and finished with a protective plating to enhance durability and conductivity. The connector is designed for vertical mounting orientation and aligns with standard printed circuit board layouts for through-hole components. Thermal Characteristics The component is suitable for typical operating temperature ranges encountered in electronic assemblies. The housing material is resistant to heat generated during soldering and normal operation, ensuring structural integrity and long-term reliability. Applications This connector is widely used in embedded systems, development platforms, consumer electronics, industrial control systems, and communication equipment. It is ideal for applications requiring modular connectivity, easy replacement, and reliable electrical interfacing between boards or components. Compliance and Standards The component is manufactured in accordance with industry standards for electronic connectors and is suitable for use in systems requiring dependable mechanical and electrical performance. It supports common environmental and material compliance requirements for modern electronic manufacturing. #commonpartslibrary #connector #header

Spring-Loaded Pogo Pin Connector – 4-position through-hole spring-loaded connector for board-to-board power and signal connections. Features a 2.00 mm pitch, single-row configuration, precision-machined copper alloy contacts with gold plating, 2 A continuous current rating (3 A peak) per contact, 100 Vrms/150 VDC voltage rating, 20 mΩ maximum contact resistance, 10 GΩ minimum insulation resistance, and 700 Vrms minimum dielectric strength. Provides 0.7 mm (0.0275 in) nominal spring travel, 1.4 mm (0.055 in) maximum travel, and up to 1,000,000 mating cycles. Designed for through-hole PCB mounting with a high-temperature thermoplastic insulator. #MillMax #8362200410001101 #PogoPin #SpringLoadedConnector #BoardToBoard #ThroughHole #4Position #2mmPitch #GoldPlatedContacts #SignalConnector #PowerConnector #EmbeddedSystems

Connector Header Through Hole 2 position 0.100" (2.54mm) Male pin header for board-to-board or cable interconnection, featuring 2 positions in a single-row, 2.54 mm (0.100") pitch through-hole breakaway design. Rated for 3 A current, with phosphor bronze square contacts, gold-plated mating contacts, tin-plated solder tails, and an operating temperature range of -65°C to +125°C. #MaleHeader #PinHeader #BoardToBoard #ThroughHole #BreakawayHeader #2Position #2p54mmPitch #3A #SullinsConnectorSolutions #Connector

Connector Header Surface Mount, Right Angle 6 position 0.079" (2.00mm) Wire-to-board PCB header for mating with compatible Micro-Lock Plus connectors, featuring a 2.00 mm pitch, single-row, right-angle surface-mount configuration with 6 circuits. It supports a maximum voltage of 250 V, a maximum current of 3.0 A per contact, and an operating temperature range of -40°C to +105°C, with a positive-lock mating design and gold-plated contacts. #Connector #PCBConnector #WireToBoard #MicroLockPlus #Molex #SurfaceMount #RightAngle #6Pin

The 532610271 is a Molex PicoBlade series wire-to-board connector header designed for compact electronic applications requiring reliable low-profile signal connections. It is a 2-position, single-row, surface-mount (SMT), right-angle header with a 1.25 mm pitch, commonly used in small consumer electronics, embedded systems, battery-powered devices, and compact PCB interconnects. This part belongs to the Molex PicoBlade (53261 series) family, which is optimized for high-density board-to-wire connections in space-constrained designs. Key Features Manufacturer: Molex Series: PicoBlade (53261 family) Connector Type: Wire-to-Board Header (Male Pins) Number of Positions: 2 pins (1×2 configuration) Pitch: 1.25 mm (high-density compact spacing) Mounting Type: Surface Mount (SMT), Right Angle Contact Type: Male blade terminals Current Rating: 1 A Voltage Rating: 125 V Operating Temperature: −40 °C to +105 °C Contact Material: Phosphor bronze Contact Plating: Tin (Sn) Flammability Rating: UL94 V-0 Package Style: Tape & Reel (for automated assembly) Typical Applications Compact consumer electronics Battery-powered devices IoT modules and embedded systems Sensor connections Portable medical or industrial devices Board-to-wire signal interconnects in tight PCB layouts #CommonPartsLibrary #Connector

CONN HEADER TH R/A 4POS 2.5mm The CS-1001R-04ALOCK is a single-row, 4-pin male header with a 2.5 mm pitch. It is intended for use with matching XH-series wire housings and crimp terminals, providing a reliable board-to-wire connection in consumer electronics, industrial equipment, and embedded systems. The right-angle mounting configuration allows the cable to exit parallel to the PCB surface, helping reduce vertical space requirements. Key Features 4-position (1×4) male header 2.50 mm pitch connector system Right-angle through-hole mounting Locking design for secure mating retention Compatible with XH-series wire housings Rated current: up to 3 A Rated voltage: up to 250 V Operating temperature: −40°C to +105°C Single-row configuration RoHS compliant Housing material based on PA66 (Nylon) with flame-retardant options depending on the variant. #CommonPartsLibrary #Connector