1 Coil, 2 Layer, Bifilar 6.3µH Wireless Charging Coil Transmitter 24mOhm Max #CommonPartsLibrary #inductor #Coil #Charging-coil #WE-WPCC

7-Port Gigabit Managed Ethernet Switch IC – High-performance Layer 2 managed Ethernet switch designed for industrial automation, IoT gateways, embedded networking, automotive networking, IP cameras, networked audio/video systems, and communication equipment. Integrates 7 Gigabit Ethernet ports with 5 integrated 10/100/1000BASE-T PHYs, 1 SGMII interface, and 1 configurable RGMII/MII/RMII interface, enabling flexible network architectures. Supports IEEE 802.3 Ethernet standards, QoS, VLAN (802.1Q), Rapid Spanning Tree Protocol (RSTP), IGMP snooping, LinkMD® cable diagnostics, Energy Efficient Ethernet (EEE), Wake-on-LAN (WoL), port mirroring, rate limiting, and advanced packet filtering for robust managed networking. Features I²C and SPI management interfaces, operates from 1.8 V, 2.5 V, and 3.3 V supplies, and is specified for the −40°C to +85°C industrial temperature range. Packaged in a 128-pin TQFP-EP (14 × 14 mm) for high-density embedded networking designs. #Microchip #KSZ9897STXITR #KSZ9897 #GigabitEthernetSwitch #ManagedSwitch #Layer2Switch #IndustrialEthernet #SGMII #RGMII #IoTGateway #NetworkController #EmbeddedSystems

MODULE_DFR0299 DFRobot Dfplayer - a Mini Mp3 Player None None None https://www.snapeda.com/parts/DFR0299/DFRobot/view-part/?ref=eda None https://www.snapeda.com/parts/DFR0299/DFRobot/view-part/?ref=snap DFR0299

Automotive 3.3V CAN flexible-data-rate (FD) transceiver with shutdown and standby mode CAN FD transceiver for interfacing 3.3 V controllers to high-speed CAN and CAN FD networks compliant with the ISO 11898-2:2016 physical layer standard. It supports signaling rates up to 8 Mbps, includes normal, standby, and ultra-low-power shutdown modes, and integrates ±58 V bus fault protection, thermal shutdown, TXD dominant timeout, undervoltage protection, and wake-up over CAN. #CANFD #CANTransceiver #Automotive #3V3 #ISO11898 #TexasInstruments

FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted handbags. But FRAM is pretty damn cool too! It's similar to Dynamic random-access memory, only with a ferroelectric layer instead of a dielectric layer. This gives it stable handling (the bytes you write are non-volatile) with dynamic responsiveness (you can write them very fast!)

Surface Mount Fuses 32V 0603 3A V/FA HALIDE FREE Littelfuse 467 Series fast-acting surface-mount fuse, 0603 thin-film package, designed for secondary circuit protection in space-constrained applications, available from 0.25A to 5A current rating, fast opening characteristic, lead-free, halogen-free and RoHS compliant, UL/CSA/NMX approved, suitable for cell phones, battery packs, digital cameras, DVD players and portable electronics. Search Keywords: Littelfuse 467 Series, 467 Series fuse, Littelfuse 0603 fuse, 0603 fast acting fuse, 0603 SMD fuse, surface mount fuse 0603, thin film fuse 0603, fast acting SMD fuse, Littelfuse 467 fast acting fuse, 0.25A to 5A SMD fuse, RoHS 0603 fuse, halogen free SMD fuse, UL approved SMD fuse, secondary circuit protection fuse Hashtags: #Littelfuse467 #467SeriesFuse #LittelfuseFuse #0603Fuse #SMD0603Fuse #FastActingFuse #SurfaceMountFuse #SMDFuse #ThinFilmFuse #CircuitProtectionFuse #SecondaryProtectionFuse #RoHSFuse #HalogenFreeFuse #ULApprovedFuse #BatteryPackFuse #PortableElectronicsFuse

Telecom IC Ethernet 56-VQFN (7x7) An Ethernet PHY transceiver that provides a single-port physical layer interface for 10BASE-Te, 100BASE-TX, 1000BASE-T, and 2.5GBASE-T Ethernet networks. It supports SGMII, MDIO, SPI, UART, and GPIO interfaces, operates from 3.3 V and 1.0 V supply rails, and is housed in a 56-pin VQFN (7 mm × 7 mm) package. #EthernetPHY #EthernetTransceiver #2_5GBASE_T #1000BASE_T #100BASE_TX #10BASE_T #SGMII #MDIO #SPI #VQFN56

20 Position FFC, FPC Connector Contacts, Top and Bottom 0.020" (0.50mm) Surface Mount, Right Angle 50 pin 0.5mm pitch bottom contact FPC connector for e-paper display flex cable, SMT horizontal connector suitable for 2-layer board edge placement

Use this template if you're planning to get your multi layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Use this template if you're planning to get your multi layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Amplifier IC Headphones, 2-Channel (Stereo) Class AB 16-WQFN (3x3) The TPA6132A2RTET is a low-power stereo headphone amplifier developed by Texas Instruments for portable and battery-powered audio applications. The device incorporates DirectPath™ technology, eliminating the need for external DC-blocking capacitors while maintaining high audio fidelity and reduced component count. The amplifier supports fully differential as well as single-ended audio inputs, providing improved immunity against system noise and radio-frequency interference. The device is optimized for portable consumer electronics including smartphones, media players, notebook computers, handheld gaming systems, and other compact audio products. Integrated pop and click suppression circuitry minimizes audible transients during startup and shutdown operation, improving user listening experience and protecting connected headphones from unwanted noise. The amplifier provides selectable gain configurations and maintains consistent output performance across a wide operating supply range. Built-in short-circuit protection, thermal shutdown protection, and electrostatic discharge protection enhance system reliability and simplify compliance with industry standards for portable electronic equipment. The TPA6132A2RTET is packaged in a compact surface-mount WQFN package suitable for high-density PCB layouts and space-constrained designs. The device is intended for low-voltage analog audio amplification applications requiring efficient power consumption, low distortion, high power-supply rejection, and capacitor-free headphone drive capability. Key Features DirectPath™ capacitor-free headphone output architecture. Integrated pop and click noise suppression. Differential and single-ended input compatibility. Selectable gain settings. High power-supply noise rejection performance. Improved RF noise immunity. Low quiescent current operation. Short-circuit and thermal-overload protection. ESD-protected outputs. Compact WQFN surface-mount package. Typical Applications Portable audio devices. Smartphones and cellular handsets. Notebook and tablet computers. MP3 and media players. Portable gaming equipment. Battery-powered consumer audio systems. Package Information Package type: WQFN surface-mount package. Mounting type: Surface mount. Manufacturer: Texas Instruments. Part number: TPA6132A2RTET. #commonpartslibrary #integratedcircuit

This is an 8-layer diode-based VCA audio compressor PCB Design that works in mono. The compressor has LED-based gain reduction metering, input gain preamplification control, output gain control, and a fast-attack switch akin to the SSL channel-strip compressors. Included is a full-wave rectifier module I published to the library which is connected to a peak detector block for the attack and release implementation. The module is to be powered by a regular outlet.

Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules

Small Footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support LAN8720A-CP-TR-ABC is a low-power, single-port 10BASE-T/100BASE-TX Ethernet Physical Layer (PHY) transceiver from Microchip Technology. It is designed to connect a microcontroller, processor, or Ethernet MAC to a standard Ethernet network through an RMII (Reduced Media Independent Interface). The device is widely used in embedded networking applications such as industrial controllers, IoT gateways, IP cameras, networked printers, routers, and ESP32-based Ethernet designs. Key Features Single-chip 10/100 Mbps Ethernet PHY Supports both 10BASE-T and 100BASE-TX Ethernet operation. RMII Interface Reduced pin-count interface for easy connection to Ethernet MACs and microcontrollers. IEEE 802.3 / 802.3u Compliant Fully compliant with Fast Ethernet standards. HP Auto-MDIX Support Automatically detects and configures straight-through or crossover Ethernet cables. Auto-Negotiation Automatically selects the best available speed and duplex mode. Flexible I/O Voltage Supports LVCMOS I/O voltages from 1.6 V to 3.6 V, simplifying interfacing with different processors. Integrated 1.2 V Regulator Allows operation from a single 3.3 V supply, reducing external components. Low-Power Architecture Features multiple power-saving modes through Microchip's flexPWR® technology. Built-in Diagnostics and Reliability Features Loopback modes, automatic polarity correction, link-status monitoring, and wake-up detection. Compact Package Available in a 24-pin SQFN/QFN (4 mm × 4 mm) package for space-constrained designs #CommonPartsLibrary #IntegratedCircuit

1/1 Transceiver Half CANbus 8-SOIC SN65HVD230D is a high-speed Controller Area Network transceiver from Texas Instruments designed for robust communication in automotive, industrial, and embedded networking applications. The device implements the physical layer interface for CAN protocol systems and provides reliable differential signal transmission with low electromagnetic emissions and strong noise immunity. This transceiver supports interoperability with standard CAN controllers and is optimized for low-power operation in distributed control systems, sensor networks, industrial automation, robotics, and automotive electronics. It features slope control functionality for reduced EMI, thermal shutdown protection, undervoltage lockout, and fail-safe receiver behavior to enhance communication reliability in electrically noisy environments. The SN65HVD230D operates with low standby current and supports high-speed CAN data communication while maintaining stable bus performance across varying operating conditions. Its compact surface-mount package makes it suitable for space-constrained embedded hardware and multi-node communication systems requiring dependable CAN bus connectivity. #commonpartslibrary #canbus #transceiver #texasinstruments #embeddedhardware #industrialcommunication #automotiveelectronics #wirelesssystems #powermanagement #electronicscomponents