STM32WL33KBV7 Routing Issue
Thought for 19 sec
The unchanged 38 warnings across all three instances suggest a shared footprint or inherited pad-rule problem, rather than surrounding placement; the root cause is not yet verified. I filed a part-quality report for Flux’s team to review.
In Agent mode, I’ll inspect the pad geometry, copper layers, and inherited clearance/keepout rules, correct the verified defect, and check routing preflight where available; no footprint changes have been made yet.
Continue in Agent Mode
Thought for 23 sec
I’ll inspect the part’s pad rules and geometry, correct any verified routing obstruction, then check the updated footprint. I’ll preserve the pin mapping and avoid changing valid package dimensions.
Thought for 7 mins 1 sec
Thought for 16 sec
Created 2 tasks.
1/2 Inspect and correct the STM32WL33KBV7 footprint’s routing obstruction.
Thought for 14 sec
Awaiting 1 task
Thought for 11 sec
2/2 Verify the source pad rules and report remaining board-level validation.
Inspect and correct the STM32WL33KBV7 footprint’s routing obstruction (inspection complete; correction blocked without consuming-board evidence).
Verify the source pad rules and report remaining board-level validation.
"STM32WL33KBV7 Routing Fix" completed.
Thought for 47 sec
I inspected the source footprint: all 33 pads are active on Top copper, and I found no custom copper-obstruction rules, so I made no speculative footprint changes; findings are in Routing Source Inspection. The 38 warnings remain unresolved because routing preflight cannot run on this standalone part project.
What is the URL of the affected PCB containing the three instances, so I can inspect their resolved rules and reproduce the failure?
Waiting for input
