Pin Grouping Datasheet

A

adrian95

Looking at the datasheet of this component, can you group together pins by their functions?
for example for Power, 3v3, gnd_1 gnd_2 etc
NOTE: If you group them, can you not add the same pin if you already added them in a group? You should know which pin function is common for its function.

flux

I’m blocked from making project edits because there are no available ACUs for AI tool execution right now.
What’s already done in this project:
  • Project is named/described for STM32WL33KBV7.
  • Symbol style was set to parametric-v1.
  • Assets/thumbnail were recently added.
What remains:
  • Review the STM32WL33KBV7 datasheet pinout.
  • Assign each physical pin to exactly one functional group, using broad groups such as Power, Ground, RF, Clock, Reset/Boot, GPIO / Digital I/O, Analog, Debug / SWD, and any dedicated supply/reference groups required by the datasheet.
  • Ensure GND pins like gnd_1, gnd_2, etc. are grouped under Ground, and 3V3/VDD/VDDA/VBAT-style pins are grouped under the appropriate Power category.
  • Keep each pin exclusive to one group, per your instruction.
Create pin groups
List symbol pins
Check duplicates
Sign up to send

Files

Pins

Symbol

Layout

3D View

No files yet