Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, source the official datasheet if needed, verify symbol/footprint/pin details against it, and update the Datasheet property when missing.
Audit complete. The 4-pin symbol and 1.0 × 1.0 mm pad footprint match NDK’s land pattern, but pin types/descriptions and several metadata fields are missing; the stored datasheet is also older (20–50 MHz) than NDK’s current revision (20–54 MHz). No Datasheet property was changed because one was already set.
General Purpose Thick Film Standard Power
and High-Power Chip Resistor
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film
Features:
- RMCF – standard power ratings
- RMCP – high power ratings
- Nickel barrier terminations standard
- Power derating from 100% at 70ºC to zero at +155ºC
- RoHS compliant, REACH compliant, and halogen free
- AEC-Q200 compliant
A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
Crystal clock oscillator designed to generate a CMOS clock signal over a 20–54 MHz frequency range. It operates from 1.8 V, 2.5 V, 3.0 V, or 3.3 V supplies, is housed in a 2.5 × 2.0 × 0.9 mm SMD package, supports ±50 ppm overall frequency tolerance, operates across −40°C to +85°C, and specifies 15 mA maximum current consumption with 35 µA maximum standby current.