Review all available part information (MPN, packag...

A

adrian95

Update the official datasheet URL, fix footprint drills, add pin descriptions, then run ERC/DRC.

flux

I’ll update the manufacturer datasheet URL and terminal metadata, adjust the footprint drill rules to the TE recommendations, then run ERC/DRC and summarize the results.

flux

I found the current symbol has terminals 1–8 plus MH1–MH3, and the footprint pads are individually addressable, so I’m applying metadata and drill updates directly in-place.

flux

Datasheet metadata, pin descriptions/types, and drill sizes have been updated; I’m verifying the changes and running ERC/DRC now.

flux

Updated the terminal metadata and footprint drill rules, then ran ERC/DRC; no open ERROR/WARNING/UNCERTAIN checks were returned. I also updated DT13-08PA Part Review with the change log and verification results.
Open items:
  • The official TE datasheet URL update was attempted, but the visible project Datasheet URL still resolves to the existing uploaded PDF; I flagged this as a platform/property-sync issue.
Suggested next steps:
  1. Manually verify the Datasheet URL field in the part properties panel.
  2. Decide whether MH1–MH3 should remain plated STD holes or be converted to mechanical/NPTH holes.
Fix datasheet and holes
Convert mounting holes
Fix datasheet property
Check manufacturability
Export review package
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Pin Orientation
1
1
Passive
Terminal
Cavity 1 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
2
2
Passive
Terminal
Cavity 2 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
3
3
Passive
Terminal
Cavity 3 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
4
4
Passive
Terminal
Cavity 4 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
5
5
Passive
Terminal
Cavity 5 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
6
6
Passive
Terminal
Cavity 6 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
7
7
Passive
Terminal
Cavity 7 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
8
8
Passive
Terminal
Cavity 8 — passive size 16 pin contact for DT13-08PA wire-to-board connection.
MH1
MH1
Not Connected
Terminal
Mounting Hole 1 — PCB screw-retention hole; mechanical/no-connect, not a signal contact.
Bottom
MH2
MH2
Not Connected
Terminal
Mounting Hole 2 — PCB screw-retention hole; mechanical/no-connect, not a signal contact.
Bottom
MH3
MH3
Not Connected
Terminal
Mounting Hole 3 — PCB screw-retention hole; mechanical/no-connect, not a signal contact.
Bottom

DT13-08PA