I’ll update the manufacturer datasheet URL and terminal metadata, adjust the footprint drill rules to the TE recommendations, then run ERC/DRC and summarize the results.
I found the current symbol has terminals 1–8 plus MH1–MH3, and the footprint pads are individually addressable, so I’m applying metadata and drill updates directly in-place.
Updated the terminal metadata and footprint drill rules, then ran ERC/DRC; no open ERROR/WARNING/UNCERTAIN checks were returned. I also updated DT13-08PA Part Review with the change log and verification results.
Open items:
The official TE datasheet URL update was attempted, but the visible project Datasheet URL still resolves to the existing uploaded PDF; I flagged this as a platform/property-sync issue.
Suggested next steps:
Manually verify the Datasheet URL field in the part properties panel.
Decide whether MH1–MH3 should remain plated STD holes or be converted to mechanical/NPTH holes.