Reorganized all 95 CMV2000-2E5M1LP terminals into seven datasheet-backed sections. Power is first, Ground last, and each section is evenly balanced left/right with unique terminal ordering.
Pin Group removed from every terminal.
No pins were renamed, replaced, renumbered, deleted, or remapped.
All 95 package coordinates remain unchanged and unique.
Official ams OSRAM DS000734 v8-00 shows principal ceramic LGA body outline 13.50 x 16.50 mm, but the Flux footprint fabrication/silkscreen outline is 13.50 x 18.65 mm and courtyard is correspondingly oversized.
check and correct if necessary according to the datasheet
I’ll verify the DS000734 v8-00 mechanical drawing and current footprint dimensions, then correct only the body-related fabrication, silkscreen, and courtyard geometry if the 18.65 mm extent is unsupported.
The datasheet confirms 18.65 mm belongs to the µPGA lead-related overall extent, not the ceramic LGA body. I’ve corrected the footprint asset to the 13.50 × 16.50 mm body and retained its existing 1.00 mm courtyard margin; now I’m verifying the loaded footprint and all 95 pads.
Verification passed: the corrected asset contains 95 pads with the same grid, omitted A1, 0.300 mm lands, pin-1 marker, and STEP reference; only the body and courtyard Y extents changed.