Part Datasheet Audit

A

adrian95

please fix this flag issue, "Part audit found critical issues: schematic assigns pin 1=+ and pin 2=-, but the datasheet's positive-side locator hole is adjacent to footprint pad 2, indicating reversed polarity mapping."

flux

I’ll verify the 1024TR datasheet polarity against the current terminal-to-pad mapping, correct the mapping, then re-run the part audit.

flux

Fixed the reversed polarity mapping:
  • Positive (+) → footprint pad 2, adjacent to the locator hole
  • Negative (−) → footprint pad 1
Pin descriptions were added for clarity, and the terminal audit now shows no matching errors.
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
-
1
Unspecified
Negative battery terminal; maps to footprint pad 1 opposite locator hole
+
2
Unspecified
Positive battery terminal; maps to footprint pad 2 adjacent to locator hole

1024TR