Part Datasheet Audit

A

adrian95

please fix this flag issue, "Part audit found critical issues: schematic assigns pin 1=+ and pin 2=-, but the datasheet's positive-side locator hole is adjacent to footprint pad 2, indicating reversed polarity mapping."

flux

I’ll verify the 1024TR datasheet polarity against the current terminal-to-pad mapping, correct the mapping, then re-run the part audit.

flux

Fixed the reversed polarity mapping:
  • Positive (+) → footprint pad 2, adjacent to the locator hole
  • Negative (−) → footprint pad 1
Pin descriptions were added for clarity, and the terminal audit now shows no matching errors.
Sign up to send

Files

Pins

Symbol

Layout

3D View

PCB layout of 1024TR

1024TR