Part Datasheet Audit

A

adrian95

please fix this flag issue, "Part audit found critical issues: schematic assigns pin 1=+ and pin 2=-, but the datasheet's positive-side locator hole is adjacent to footprint pad 2, indicating reversed polarity mapping."

flux

I’ll verify the 1024TR datasheet polarity against the current terminal-to-pad mapping, correct the mapping, then re-run the part audit.

flux

Fixed the reversed polarity mapping:
  • Positive (+) → footprint pad 2, adjacent to the locator hole
  • Negative (−) → footprint pad 1
Pin descriptions were added for clarity, and the terminal audit now shows no matching errors.
Sign up to send

Files

Pins

Symbol

Layout

3D View

3D view of the PCB of 1024TR

1024TR