USB Connectors 24 Receptacle 1 8.94*7.3mm RoHS #usb #typec #connector

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Board Edge, Cutout; Surface Mount; Through Hole, Right Angle #commonpartslibrary #connector #usb #type-c

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole #commonpartslibrary #connector #usb #typec

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Through Hole #commonpartslibrary #connector #typec #usb

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #reusable #module #edge-computing #edgeComputing #espressif #sublayout #iot #iot #ESP32 #relay

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Right Angle; Through Hole Waterproof USB Type-C connector providing a reversible USB Type-C interface for data and power connections in electronic applications. The connector features a waterproof design, USB Type-C receptacle interface, and supports a rated voltage of 5 V DC and current rating of 3 A as specified in the manufacturer datasheet. #USBTypeC #WaterproofConnector #USBConnector #AmphenolICC #PCBConnector #ElectronicComponents

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Surface Mount, Through Hole Input/Output Connector, USB Type-C connector, 24 pos., Height: 12 mm, 2-row , Vertical-Receptacle

USB Type-C Receptacle Connector – 16-pin USB Type-C female receptacle for USB 2.0 data, 5 V power delivery, charging, and embedded device interfaces. Features a surface-mount, right-angle PCB design with 16 contacts, 3 A continuous current rating, 5 V operating voltage, and reversible plug orientation compliant with the USB Type-C mechanical interface. Designed for USB 2.0 applications, where duplicated USB-C pins are internally connected or omitted to simplify PCB routing while maintaining plug reversibility. Rated for 5,000–10,000 mating cycles, operates over a −25°C to +85°C temperature range, and is RoHS compliant. #Shouhan #TYPEC16PIN2MD073 #USBTypeC #USBCConnector #USB2Connector #TypeCReceptacle #16Pin #RightAngle #SurfaceMount #PCBConnector #PowerConnector #EmbeddedSystems

CONN RCPT Type-C 16POS SMD R/A The TYPE-C 16PIN 2MD(073) is a surface-mount USB Type-C receptacle connector commonly manufactured by SHOU HAN. It is designed for compact PCB applications requiring USB 3.1-compatible data transfer and 5V power delivery in consumer and industrial electronic devices. This connector uses a 16-pin optimized footprint (instead of the full 24-pin USB-C standard) where some contacts are internally shorted or omitted depending on application, making PCB routing simpler while still supporting basic USB-C functionality. USB Type-C female receptacle 16-pin reduced-layout configuration Supports USB 3.1 data transmission (application dependent) 5V rated voltage operation 3A–5A current capability (model dependent variant) Surface-mount (SMD), right-angle / horizontal mount Compact design for high-density PCB layouts Reversible plug orientation support (USB-C standard) Operating temperature: -25°C to +85°C Typical durability: ~5,000–10,000 mating cycles RoHS compliant, lead-free construction #CommonPartsLibrary #Connector

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole The USB4105-GF-A is a USB Type-C receptacle connector designed for USB 2.0 applications, commonly used in embedded systems, IoT devices, and consumer electronics. It features a 24-position (16 active + 8 dummy) contact design that supports reversible plug orientation, making it user-friendly and compliant with USB Type-C standards. This connector is a right-angle, surface-mount (SMT) device with through-hole retention tabs, providing both compact PCB integration and strong mechanical stability. Key Features USB Type-C Interface Reversible plug orientation (no wrong insertion) Standard USB Type-C receptacle Supports USB 2.0 signaling Contact Configuration 24 pins total (16 active + 8 dummy pins) Includes: Power (VBUS) Ground (GND) USB 2.0 data (D+, D−) Configuration channel (CC) Electrical Capability Supports multiple current levels (up to 5A depending on design) Rated voltage up to 48V DC Mechanical Design Right-angle (horizontal) mounting Surface-mount + through-hole hybrid Includes: Board guide Solder retention tabs (strong anchoring) Durability & Materials Shielded metal shell (EMI protection) Contact finish: Gold plating Housing: UL94 V-0 flame rated Mating cycles: ~20,000 insertions Environmental Specs Operating temperature: -40°C to +85°C RoHS compliant (lead-free) Typical Applications Microcontroller boards (ESP32, Arduino, etc.) Charging + data interface for embedded devices Power + USB communication ports Consumer electronics (gadgets, accessories) #CommonPartsLibrary #Connector #USB #DVI #USB4105 #USB-C

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole USB Type-C receptacle 16 pin USB2.0 The USB4215-03-A is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a 16-pin configuration supporting reversible plug orientation with standard USB 2.0 differential data lines and configuration channel (CC) pins. The connector is intended for surface-mount PCB assembly with through-hole shell stakes for enhanced mechanical strength. It is widely used in compact embedded systems for power delivery, charging interfaces, and basic data communication. Key Features USB Type-C receptacle (USB 2.0 compliant) 16 functional pins (no SuperSpeed support) Reversible plug orientation Surface-mount contacts with through-hole shell tabs Compact, low-profile design High insertion cycle durability Suitable for automated assembly Electrical Characteristics Rated Current: VBUS: up to 5.0 A (depending on PCB design and cable) Signal pins: 0.25 A max Rated Voltage: 20 V DC max Contact Resistance: ≤ 40 mΩ Insulation Resistance: ≥ 100 MΩ Dielectric Withstanding Voltage: 100 V AC Mechanical Characteristics Mounting Type: Surface Mount (SMT) with Through-Hole Shield Tabs Number of Positions: 16 Mating Cycles: 10,000 cycles (typical) Insertion Force: 5–20 N Extraction Force: 8–20 N Material Specifications Contacts: Copper Alloy Contact Plating: Gold over Nickel Housing: High-temperature thermoplastic (UL94V-0) Shell: Stainless Steel Environmental Characteristics Operating Temperature Range: -25°C to +85°C Storage Temperature Range: -40°C to +85°C RoHS Compliant: Yes Halogen Free: Yes Pin Configuration (USB 2.0 Type-C) VBUS (Power) GND (Ground) D+ / D− (USB 2.0 differential pair) CC1 / CC2 (Configuration channel) SBU pins (optional/unused in USB 2.0 designs) Applications USB power input (5 V / USB-C PD trigger designs) Embedded systems and development boards Consumer electronics Charging interfaces Low-speed USB communication devices Packaging Tape & Reel for automated pick-and-place assembly Compliance & Standards USB Type-C Specification (USB 2.0 interface) RoHS / REACH compliant UL recognized materials #CommonPartsLibrary #Connector #USB-C

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole, USB Type-C receptacle 16 pin power only The UJ20-C-H-G-SMT-2-P16-TR is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a right-angle, surface-mount (SMT) configuration with additional through-hole retention tabs for improved mechanical strength on the PCB. This connector supports reversible USB-C plug insertion, making it suitable for modern embedded systems, consumer electronics, and charging/data interfaces. It is optimized for compact designs while maintaining reliable electrical and mechanical performance. Key Features Electrical Characteristics USB Standard: USB 2.0 (up to 480 Mbps data rate) Rated Current: up to 5 A (VBUS) Rated Voltage: 48 VDC max Mechanical / Physical Connector Type: USB Type-C receptacle Mounting: Surface Mount (SMT) + through-hole stakes Orientation: Right-angle (horizontal) Number of Contacts: 24 positions (16 active + 8 dummy) Contact Plating: Gold (≈3 µin) for durability Mating Cycles: ~10,000 insertions Materials & Build Shielding: Fully shielded (metal shell, SUS304) Insulator Material: UL94 V-0 rated (flame-retardant) Operating Temperature: -25°C to +85°C Packaging: Tape & Reel (TR) for automated assembly Series: UJ20 (Same Sky / former CUI Devices) Typical Applications Embedded systems (e.g., MCU/SoC boards) Power + data interface for IoT devices Consumer electronics (chargers, hubs, accessories) Development boards and custom PCB designs Quick Insight (Design Tip) Even though it’s a USB-C connector, this specific part is USB 2.0 only—so: No SuperSpeed (TX/RX) lines Only VBUS, GND, CC1/CC2, D+ / D- are typically used #CommonPartsLibrary #Connector #USB

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Through Hole, Right Angle The USB4085-GF-A is a USB Type-C receptacle connector designed for compact embedded and consumer electronic applications requiring USB connectivity and power delivery support. It provides a reversible plug interface compliant with USB Type-C mechanical specifications and is commonly used in portable devices, development platforms, industrial electronics, and power-enabled USB systems. This connector supports USB data communication and power connections through a surface-mount design optimized for automated PCB assembly. The device includes integrated through-hole shell stakes for enhanced mechanical retention and durability under repeated insertion cycles. Its compact footprint and standardized pin arrangement enable compatibility with modern USB Type-C implementations while maintaining reliable electrical and mechanical performance. The USB4085-GF-A is suitable for USB charging, data transfer, embedded systems, battery-powered devices, and general-purpose USB Type-C interface applications. Engineering Specification Connector Type USB Type-C Receptacle Connector USB Interface Standard USB Type-C compliant receptacle Mounting Style Surface-mount technology with through-hole shell retention tabs Contact Configuration Dual-row reversible USB Type-C contact arrangement Number of Contacts Twenty-four signal and power contacts Orientation Right-angle PCB mount Data Support USB data communication support compatible with USB Type-C applications Power Capability Supports USB power and charging applications Shielding Integrated metal shell shielding for EMI reduction and mechanical protection Mechanical Retention Reinforced through-hole shell stakes for connector stability and insertion durability Contact Material Copper alloy contacts with plated finish for conductivity and corrosion resistance Housing Material High-temperature thermoplastic suitable for reflow soldering Operating Temperature Range Industrial-grade operating temperature capability suitable for embedded electronic systems Assembly Compatibility Compatible with automated SMT reflow assembly processes Application Areas Portable electronics, embedded systems, industrial controllers, development boards, battery-powered devices, USB charging interfaces, and communication equipment #commonpartslibrary #connector #usbtypec #interface #powermanagement #embeddedhardware #electronics #usbconnector

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Through Hole #commonpartslibrary #connector #usbc #tht

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle; Through Hole #commonpartslibrary #connector #usbc #tht

USB-C (USB TYPE-C) Receptacle Connector 24 Position Panel Mount, Through Hole, Right Angle The MUSBRM1C1M0 is a ruggedized USB Type-C receptacle connector designed for high-reliability data and power connectivity in industrial, embedded, transportation, and harsh-environment applications. The connector features a reversible USB Type-C interface that supports modern high-speed communication protocols while providing robust mechanical durability and secure board-level attachment. Its reinforced construction helps withstand vibration, shock, and repeated mating cycles, making it suitable for demanding applications where reliability and long service life are critical. The device is commonly used in industrial controllers, communication equipment, medical devices, consumer electronics, and next-generation embedded systems requiring compact and versatile connectivity. Engineering Specifications Manufacturer: Amphenol Communications Solutions Part Number: MUSBRM1C1M0 Connector Type: USB Type-C Receptacle Interface Standard: Universal Serial Bus Type-C Connector Gender: Receptacle Mounting Style: Surface Mount Orientation: Right Angle Contact Configuration: USB Type-C Multi-Function Interface Data Support: High-Speed Data Transmission Power Delivery Support: Compatible with USB Power Delivery Architectures Shielding: Integrated EMI Shielding Contact Material: Copper Alloy Contact Finish: Gold-Plated Contact Interface Housing Material: High-Strength Metal Shield Construction Durability: High Mating Cycle Life Environmental Performance: Designed for Industrial Applications Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Embedded Systems, Industrial Automation, Consumer Electronics, Communication Equipment, Medical Devices, IoT Products, Portable Electronics, Data Acquisition Systems Key Features Reversible USB Type-C connection interface Ruggedized mechanical construction High-speed data communication capability Secure PCB mounting design Enhanced resistance to vibration and mechanical stress Integrated shielding for improved electromagnetic compatibility Compact footprint for space-constrained designs Supports modern USB power and data architectures Long operational lifespan with high insertion cycle durability Suitable for industrial and commercial electronic systems #MUSBRM1C1M0 #Amphenol #USBTypeC #USBConnector #TypeCReceptacle #HighSpeedConnectivity #PowerDelivery #IndustrialElectronics #EmbeddedSystems #CommunicationEquipment #IoTDevices #ConsumerElectronics #PCBDesign #ElectronicComponents #SurfaceMount #DataTransmission #USBPD #IndustrialAutomation #MedicalElectronics #ConnectorTechnology

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) - Power Only 6 Pin Position Surface Mount, Right Angle; Through Hole The 2479774-2 specification defines the engineering requirements for a high-density electronic connector assembly intended for board-to-cable or board-to-board interconnection in advanced electronic systems. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure reliable signal transmission, stable mechanical engagement, and long-term durability in demanding electronic applications. The component is intended for use in systems requiring compact interconnect solutions with high signal integrity and robust mechanical retention. It is suitable for applications such as industrial electronics, communication systems, embedded control units, and high-performance electronic assemblies where reliable connectivity and repeatable mating performance are required. Engineering Requirements The connector assembly shall be manufactured using precision-formed conductive materials and high-strength insulating housing materials to ensure stable electrical performance and mechanical reliability. The design shall support secure mating engagement and consistent signal continuity across repeated connection cycles. Electrical characteristics shall ensure low contact resistance, stable signal integrity, and reliable conductivity under defined operating conditions. The connector shall maintain performance under mechanical vibration, thermal variation, and environmental stress conditions typical of industrial and embedded system applications. Mechanical construction shall ensure accurate alignment between mating interfaces, secure locking engagement, and resistance to accidental disconnection. The design shall support repeated mating cycles without degradation of electrical or mechanical performance. Workmanship shall be free from defects such as contamination, deformation, plating irregularities, or structural inconsistencies that could impact reliability or functionality. Manufacturing and inspection shall be conducted under controlled quality systems using calibrated equipment to ensure compliance with engineering requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures prior to implementation. Documentation Supporting documentation shall include engineering drawings, connector datasheets, material declarations, inspection records, qualification test reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through formal engineering change control procedures. Each revision shall undergo technical evaluation, validation, and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #Connector #HighDensityInterconnect #ElectronicComponents #SignalIntegrity #EmbeddedSystems #IndustrialElectronics #Manufacturing #QualityAssurance #EngineeringDocumentation