USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Receptacle Connector 24 Position Board Edge, Cutout; Surface Mount; Through Hole, Right Angle This component is a precision electronic device designed for integration into a wide range of circuit applications. It provides reliable electrical and mechanical performance while maintaining compatibility with standard PCB assembly processes. The device is intended for use in systems requiring stability, durability, and consistent operation across varying environmental conditions. Key Features High reliability and stable operation Compact, industry-standard footprint Compatible with automated assembly processes Lead-free and environmentally compliant Designed for long-term use Applications Consumer electronic devices Industrial control equipment Embedded systems and controllers Power and signal management circuits General-purpose electronic assemblies Electrical Characteristics (Typical – verify with manufacturer datasheet) Voltage rating: To be specified Current rating: To be specified Power rating: To be specified Tolerance or accuracy: To be specified Relevant electrical parameter (resistance, impedance, gain, etc.): To be specified Mechanical Characteristics Package type: To be specified Mounting method: Surface mount or through-hole Dimensions: To be specified Terminal style: To be specified Environmental Specifications Operating temperature range: Typically suitable for standard industrial conditions Storage temperature range: Extended range for safe storage Humidity tolerance: Suitable for non-condensing environments Compliance and Standards Compliant with environmental regulations Compatible with industry manufacturing standards #commonpartslibrary #connector #usb #typec

Tactile Switch SPST-NO Top Actuated Through Hole tactile switch 6x6 through hole The B3F-1000 is a compact, through-hole mounted tactile switch designed for momentary input applications. It features a standard 6.0 mm square footprint and is widely used in consumer and industrial electronics for reliable user interface control. Mechanical Characteristics Dimensions (L × W × H): 6.0 mm × 6.0 mm × 3.4 mm Actuator Type: Round Actuator Height: 4.3 mm Mounting Style: Through Hole Mounting Direction: Straight Termination Style: Solder Pin Color: White Electrical Characteristics Switch Function: SPST, Momentary (OFF-(ON)) Contact Rating: 50 mA @ 24 VDC Operating Force: 1 N (~100 gf) Contact Resistance: ≤100 mΩ (typical, refer to datasheet) Insulation Resistance: ≥100 MΩ (typical, refer to datasheet) Environmental Characteristics Operating Temperature Range: -25°C to +70°C RoHS Compliance: Yes Reliability Operating Life: 1,000,000 cycles Packaging Information Factory Pack Quantity: 1500 pcs Unit Weight: 0.008818 oz (~0.25 g) Additional Information Country of Origin: Japan (JP) Illumination: Non-illuminated Ground Terminal: No #commonpartslibrary #switch #tactile #spst

Connector Header Through Hole 40 position 0.100" (2.54mm) Raspberry Pi 40 pin header The TSW-120-07-G-D is a through-hole, double-row vertical header manufactured by Samtec. It features 40 total positions (2 rows of 20 pins) with a standard 2.54 mm pitch. This connector is widely used for board-to-board connections, prototyping, and general-purpose signal routing in embedded and electronic systems. It is designed for reliable mechanical and electrical performance with gold-plated contacts for enhanced conductivity and corrosion resistance. Manufacturer Samtec Inc. Manufacturer Part Number TSW-120-07-G-D Product Type Through-Hole Pin Header Number of Positions 40 (2 × 20) Number of Rows 2 Pitch 2.54 mm (0.100") Row Spacing 2.54 mm (0.100") Mounting Type Through Hole Orientation Vertical Contact Material Phosphor Bronze Contact Plating Gold (Au) over Nickel Plating Thickness Typically 10 µin (0.25 µm) Gold Insulator Material Black Liquid Crystal Polymer (LCP) Current Rating Typically 3.0 A per contact (depending on application conditions) Voltage Rating Typically 250 VAC Operating Temperature Range -55°C to +125°C Termination Type Solder Contact Style Square Post Post Length Standard Samtec “-07” tail length (approx. 2.92 mm tail, varies slightly per datasheet) Applications Embedded systems (e.g., Raspberry Pi GPIO headers) Development boards and expansion modules Board-to-board interconnects Prototyping and test setups Compliance RoHS Compliant Lead-Free Notes Compatible with standard 2.54 mm female headers and sockets Commonly used in stacking or mezzanine configurations Available in various plating options and pin lengths under the TSW series #commonpartslibrary #connector

2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Surface Mount The 1250360000 is a high-quality PCB terminal block manufactured by Weidmüller, designed for secure and reliable wire-to-board connections. It features a robust screw-clamp connection system that ensures strong mechanical retention and excellent electrical conductivity. This component is widely used in industrial control systems, power distribution modules, and automation equipment where dependable field wiring is required. The terminal block is designed for easy installation on printed circuit boards and supports solid or stranded wires. Its durable housing material provides resistance to environmental stress, making it suitable for long-term operation in demanding applications. Key Features Screw clamp connection for secure wire termination Through-hole PCB mounting for strong mechanical stability High current carrying capability مقاust insulating housing with flame-retardant properties واضحة labeling area for easy identification Suitable for industrial and automation applications Electrical Characteristics Rated Voltage: 300 V (typical, verify datasheet) Rated Current: Up to 10–16 A (depending on wire size) Contact Resistance: Low (optimized for power applications) Insulation Resistance: High (>10⁸ Ω typical) Mechanical Characteristics Mounting Type: Through-Hole PCB Connection Type: Screw Clamp Number of Positions: Typically 2–12 positions (variant dependent) Wire Gauge Range: ~24 AWG to 12 AWG (approx.) Pitch: Typically 5.00 mm or 5.08 mm (verify exact variant) Material Information Housing Material: Polyamide (PA), flame-retardant (UL94 V-0) Contact Material: Copper alloy Contact Plating: Tin-plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Industrial control systems Power supply units Automation and PLC systems Signal and power distribution boards Building and factory wiring interfaces Notes Exact electrical ratings and pitch may vary depending on the specific configuration under this series. Always refer to the official Weidmüller datasheet for precise parameters before design integration. #commonpartslibrary #connector #terminalblock

2 Channel AFE 16 Bit 24-UQFN (4x4) The AFE881H1RRUR is a highly integrated analog front-end (AFE) designed for multi-channel data acquisition systems. It combines precision analog signal conditioning with high-speed analog-to-digital conversion, making it suitable for applications such as medical instrumentation, industrial measurement, and test and measurement equipment. The device integrates low-noise amplifiers, programmable gain stages, anti-aliasing filters, and high-resolution ADCs into a compact package, reducing system complexity and board space. Key Features Multi-channel analog front-end integration High-resolution analog-to-digital conversion Low-noise input stage for precision measurements Programmable gain amplifier (PGA) Integrated anti-aliasing filters High sampling rate capability Serial digital interface (SPI-compatible) Low power consumption for portable systems Compact surface-mount package Electrical Characteristics (Typical – refer to datasheet for exact values) Supply Voltage: ~1.8 V to 3.3 V (analog/digital domains) Input Voltage Range: Dependent on configuration Resolution: Up to 16-bit or higher (device dependent) Sampling Rate: Up to several MSPS (depending on mode) Power Consumption: Optimized for performance/power balance Functional Blocks Low-noise input buffer Programmable gain amplifier (PGA) Anti-aliasing filter High-speed ADC core Digital control interface (SPI) Clock management circuitry Package Information Package Type: QFN / VQFN (exact variant per TI RRU package code) Mounting Type: Surface Mount Pin Count: Typically 40+ pins (refer to datasheet for exact count) Applications Medical imaging and instrumentation Industrial data acquisition systems Oscilloscopes and test equipment Communication systems Precision sensor interfaces Advantages High integration reduces external components Improved signal integrity due to low-noise design Flexible configuration via programmable gain Compact footprint for dense PCB layouts Notes Exact electrical parameters, pin configuration, and performance metrics must be verified in the official Texas Instruments datasheet. Proper PCB layout (grounding, shielding, and decoupling) is critical for optimal performance. #commonpartslibrary #integratedcircuit

Supercapacitors / Ultracapacitors 2.7V 50F 18X40mm Radial Custom made footprint from Datasheet dimensions. Not compliant to any standards. No 3D Model #capacitor #part

Dip Switch SPST 6 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-6LPSTJ is a through-hole terminal block connector designed for secure wire-to-board connections. It features a multi-position configuration with a compact footprint and robust clamping mechanism, making it suitable for industrial and general-purpose electronic applications. The component ensures reliable electrical contact and ease of installation for power and signal wiring. Key Features Multi-position terminal block (6 positions) Through-hole mounting for strong mechanical stability Screw clamp or spring clamp termination (depending on variant) მაღალი reliability for power and signal connections مقاومة عالية للاهتزاز (vibration-resistant design) Standard pitch for compatibility with common PCB layouts Electrical Characteristics Rated Voltage: Typically up to 300 V (application dependent) Rated Current: Typically up to 10–15 A per contact (depends on wire gauge) Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Mechanical Characteristics Number of Positions: 6 Pitch: Typically 5.08 mm (verify exact datasheet) Mounting Type: Through-hole PCB mount Wire Size Range: عادةً 24–12 AWG (depends on design) Actuation Type: Screw or spring clamp Material Properties Housing Material: Flame-retardant thermoplastic (UL94 V-0 rated) Contact Material: Copper alloy Plating: Tin-plated contacts for corrosion resistance Environmental Specifications Operating Temperature Range: -40°C to +105°C (typical) مقاومة للبيئات الصناعية القياسية RoHS compliant Applications Power distribution modules Industrial control systems PCB-based wiring interfaces Automation and instrumentation systems Compliance and Standards UL recognized (model dependent) IEC compliance for terminal blocks RoHS compliant #commonpartslibrary #switch #dip #spst

Monitors & Reset Circuits TPS3808G33DRVT WSON-6_L2.0-W2.0-P0.65-TL-EP LCSC Part Number: C702176 JLCPCB Part Class: undefined Manufactured by TI(德州仪器) Texas Instruments TPS3808 low-quiescent-current voltage supervisor and reset generator, supply voltage monitoring from 0.4V to 5V, 0.5% threshold accuracy, adjustable reset delay from 1.25ms to 10s using external capacitor, open-drain RESET output, manual reset (MR) input, ultra-low 2.4µA typical quiescent current, suitable for microcontrollers, DSPs, FPGAs, ASICs, battery-powered and portable devices, operating temperature range -40°C to +125°C, available in SOT-23-6 and WSON-6 packages. Search Keywords: TPS3808, TPS3808G, Texas Instruments TPS3808, TI TPS3808, voltage supervisor, reset supervisor, reset generator, watchdog reset, power-on reset, POR supervisor, brownout detector, voltage monitor IC, microcontroller supervisor, open drain reset, adjustable reset delay, manual reset supervisor, low power supervisor, battery powered reset IC, TPS3808 datasheet, TPS3808 SOT-23-6, TPS3808 WSON-6 Hashtags: #TPS3808 #TexasInstrumentsTPS3808 #TIVoltageSupervisor #VoltageSupervisor #ResetSupervisor #ResetGenerator #PowerOnReset #BrownoutDetector #VoltageMonitorIC #MicrocontrollerSupervisor #OpenDrainReset #ManualReset #LowPowerSupervisor #BatteryPoweredDesign #SOT236 #WSON6

SDRAM - Mobile LPDDR4 Memory IC 48Gbit 2.133 GHz MT53E1536M32D4DT-046 WT:A is a high-density 48Gb (6GB) LPDDR4/LPDDR4X SDRAM memory device from Micron Technology. It is designed for high-performance, low-power applications requiring fast memory bandwidth and efficient power management. The device features a 32-bit data bus, supports data rates up to 4266 MT/s, and is packaged in a compact 200-ball FBGA, making it suitable for embedded computing, industrial systems, networking equipment, AI edge devices, automotive electronics, and mobile platforms. Key Features 48Gb (6GB) LPDDR4/LPDDR4X SDRAM Organized as 1.5G × 32 bits Data transfer rates up to 4266 MT/s Maximum clock frequency of 2133 MHz Low-power operation with 1.1V core supply 32-bit memory interface 200-ball FBGA package JEDEC LPDDR4-compliant architecture Per-bank refresh support Temperature-compensated refresh Self-refresh and deep power-down modes Partial-array self-refresh capability High bandwidth with reduced power consumption Optimized for compact embedded designs Operating temperature range: –30°C to +85°C Typical Applications Embedded Linux computers Single-board computers (SBCs) AI and edge computing platforms Industrial automation systems Networking and telecommunications equipment Automotive infotainment and control systems Tablets and mobile devices FPGA and SoC-based designs #commonpartslibrary #integratedcircuit #memory #dram #sdram #lpddr4 #lpddr4x #mobiledram #micron #embeddedsystems #embeddedcomputing #industrialelectronics #automotiveelectronics #edgecomputing #artificialintelligence #networking #telecommunications #highspeedmemory #lowpowerdesign #computerhardware #electroniccomponents #semiconductor #datasheet #fbga #memorychip #electronicsdesign #pcbdesign #hardwareengineering #electronicengineering #systemonchip #fpga #iot #internetofthings #computermemory #digitalelectronics #surfaceMount #smt #bga #storage #highperformancecomputing #hpc #mobiledevices #industrialautomation #electronicdesign #componentlibrary #fluxlibrary #parametricpart #eda #schematic #pcb #electronicdesignautomation #chipdesign #embeddedhardware #memorymodule #lowpowerelectronics #highbandwidthmemory #electronics #hardwaredevelopment #engineering #electricalengineering

Microchip ATmega32U4 high-performance low-power 8-bit AVR microcontroller with integrated USB 2.0 full-speed device controller, up to 16MHz operation, 32KB Flash memory, 2.5KB SRAM and 1KB EEPROM, 12-channel 10-bit ADC, timers, PWM, SPI, TWI/I2C, USART, JTAG debug interface, watchdog timer, brown-out detection and multiple sleep modes, operating voltage range 2.7V to 5.5V, available in TQFP-44 and QFN-44 packages. Search Keywords: ATmega32U4, Microchip ATmega32U4, Atmel ATmega32U4, AVR USB microcontroller, 8-bit AVR MCU, ATmega32U4 USB, ATmega32U4 TQFP44, ATmega32U4 QFN44, 32KB Flash AVR, Arduino Leonardo MCU, Pro Micro MCU, ATmega32U4 datasheet Hashtags: #ATmega32U4 #MicrochipATmega32U4 #AtmelATmega32U4 #AVRMicrocontroller #8bitMCU #USBMicrocontroller #USBFullSpeed #32KBFlash #ArduinoLeonardoMCU #ProMicroMCU #TQFP44 #QFN44MCU AVR 32K FLASH 16MHZ 44-TQFP Atmel ATMEGA32U4-AU, 8bit AVR Microcontroller, 16MHz, 1 kB, 32 kB Flash, 44-Pin TQFP USB-C Pro Micro ATmega32U4 / Elite-C compatible module

ARM® Cortex®-M0+ - Microcontroller IC 32-Bit Dual-Core 133MHz External Program Memory 56-QFN (7x7) Part Description The RP2040 by Raspberry Pi is an ARM® Cortex®-M0+ microcontroller featuring a 32-Bit Dual-Core processor capable of running at 133MHz. It supports external program memory and integrates a comprehensive set of peripherals including I2C, IrDA, QSPI, SPI, UART/USART, USB, and more. This IC is packaged in a 56-pin QFN (7x7) with exposed pads, making it ideal for surface-mount applications and high-density designs. Additional features include integrated data converters (4x12b SAR A/D), 264K x 8 RAM, and robust connectivity along with peripherals like brown-out detection, DMA, I2S, LCD control, POR, PWM, and Watchdog Timer. Note that the image is a representation only; exact specifications must be confirmed via the product datasheet. Manufacturer Lead Time: 8 Weeks Packaging Options: Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Hashtags #RP2040 #ARM #CortexM0Plus #DualCore #133MHz #Microcontroller #Embedded #RaspberryPi #56QFN #SurfaceMount #ExternalMemory #TapeAndReel #CutTape #DigiReel

Rockchip RK809 highly integrated PMIC with audio codec for multi-core system applications, providing five configurable synchronous step-down converters, nine LDO regulators, two switches, battery fuel gauge, configurable power-up/power-down sequencing, integrated RTC with 32.768kHz clock support, I2C interface for voltage and fuel gauge control, dynamic DC/DC output voltage adjustment, soft-start on all channels, 2MHz switching frequency, integrated power switches, headphone driver and Class-D audio driver, QFN68 7.0 x 7.0mm package. Search Keywords: RK809, Rockchip RK809, RK809 PMIC, RK809 power management IC, RK809 codec PMIC, RK809 battery fuel gauge, RK809 audio codec, RK809 DC DC converter, RK809 LDO regulator, RK809 I2C PMIC, RK809 RTC, RK809 QFN68, Rockchip PMIC, RK809 datasheet Hashtags: #RK809 #RockchipRK809 #RockchipPMIC #PMIC #PowerManagementIC #AudioCodecPMIC #BatteryFuelGauge #DCDCConverter #LDORegulator #I2CPMIC #RTC #ClassDAudio #QFN68

Raspberry Pi RP2040 dual-core Arm Cortex-M0+ microcontroller, running up to 133MHz, with 264KB on-chip SRAM, external QSPI flash support, USB 1.1 device/host controller, 30 GPIO pins, UART, SPI, I2C, PWM, ADC, timers and programmable I/O (PIO) blocks, 1.8V to 3.3V I/O support, low-cost MCU for embedded systems, development boards, IoT devices, USB peripherals, sensors and educational electronics. Search Keywords: RP2040, Raspberry Pi RP2040, RP2040 microcontroller, dual core Cortex-M0+ MCU, Raspberry Pi Pico MCU, RP2040 PIO, RP2040 USB microcontroller, RP2040 QSPI flash, RP2040 datasheet, RP2040 embedded MCU Hashtags: #RP2040 #RaspberryPiRP2040 #RaspberryPiPico #Microcontroller #CortexM0Plus RP2040 chip for Raspberry Pi Pico - ARM® Cortex®-M0+ MCU 32-Bit

The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

GL850G USB 2.0 Low-Power HUB Controller, SSOP-28 Genesys Logic GL850G USB 2.0 low-power hub controller, fully compliant with USB 2.0 specification, single transaction translator hub solution with 5V to 3.3V and 3.3V to 1.8V integrated voltage regulators, embedded 8-bit RISC processor, external EEPROM support for customized VID/PID and port configuration, individual or gang power management, two-color status LED support, power-enable polarity selection, low power consumption and low BOM design, suitable for docking stations, embedded systems, USB hubs and low/full-speed USB device expansion. Search Keywords: GL850G, Genesys Logic GL850G, GL850G USB hub controller, USB 2.0 hub controller, low power USB hub IC, single TT USB hub controller, GL850G hub IC, Genesys USB hub controller, GL850G EEPROM VID PID, 4 port USB hub controller, USB 2.0 low power hub, GL850G datasheet Hashtags: #GL850G #GenesysLogicGL850G #GenesysLogic #USBHubController #USB20Hub #LowPowerUSBHub #SingleTTHub #HubControllerIC #USBController #EmbeddedUSBHub #EEPROMConfigurable #VIDPIDConfig #4PortUSBHub

SN74LS283 4-bit binary full adder IC with fast carry, TTL 74LS logic family, performs addition of two 4-bit binary words with carry input and carry output, provides four sum outputs and final carry output, internal look-ahead carry circuitry for high-speed arithmetic operation, corner VCC and GND pins for simplified PCB layout, suitable for arithmetic logic circuits, counters, processors and digital logic systems, available in DIP-16 and other logic IC packages. Search Keywords: SN74LS283, 74LS283, SN74LS283N, SN74LS283 DIP16, SN74LS283 full adder, 74LS283 full adder IC, 4 bit binary full adder, TTL 4 bit adder, fast carry adder, binary adder IC, 74LS logic adder, look ahead carry adder, SN54LS283, SN74S283, SN74LS283 datasheet, 74LS283 replacement, HD74LS283, DM74LS283 Hashtags: #SN74LS283 #74LS283 #SN74LS283N #SN54LS283 #SN74S283 #HD74LS283 #DM74LS283 #FullAdder #BinaryFullAdder #4BitAdder #4BitBinaryAdder #TTLAdder #TTLLogicIC #74LSLogic #FastCarryAdder #LookAheadCarry #ArithmeticLogicIC #DigitalLogicIC #DIP16

Abracon AISC-0402HP Series high-current ceramic wire wound SMD RF inductor, 0402 package, 1.00 x 0.55 x 0.50mm size, inductance range from 2.0nH to 68nH, high Q factor, low DCR, high self-resonant frequency up to 8.5GHz, rated current up to 2100mA, ±2%, ±5% or ±10% tolerance options, -40°C to +125°C operating temperature, RoHS/RoHS II compliant, suitable for RF circuits, Bluetooth, WLAN, GPS, broadband network and wireless communication applications. Search Keywords: AISC-0402HP, Abracon AISC-0402HP, AISC-0402HP Series, Abracon 0402 inductor, 0402 ceramic wire wound inductor, high current 0402 inductor, RF chip inductor 0402, ceramic RF inductor, wire wound RF inductor, high Q 0402 inductor, low DCR 0402 inductor, SMD RF inductor, 2nH to 68nH inductor, Bluetooth RF inductor, WLAN RF inductor, GPS RF inductor, AISC-0402HP datasheet Hashtags: #AISC0402HP #AbraconAISC0402HP #AbraconInductor #0402Inductor #SMDInductor #RFInductor #CeramicInductor #WireWoundInductor #HighCurrentInductor #HighQInductor #LowDCRInductor #ChipInductor #BluetoothInductor #WLANInductor #GPSInductor #WirelessInductor #RFCircuitInductor #2nHInductor #68nHInductor 0402HP-25 0402HP

330 µF Molded Tantalum Polymer Capacitor 16 V 2917 (7343 Metric) 50mOhm @ 100kHz KEMET KO-CAP solid polymer electrolytic capacitor, conductive polymer cathode, very low ESR down to 5mΩ, high ripple current capability, high frequency capacitance retention, long operational life, volumetrically efficient surface-mount package, improved capacitance retention compared to liquid electrolytic capacitors, suitable for high-reliability power filtering, decoupling and DC/DC converter applications. Search Keywords: KEMET KO-CAP, KO-CAP polymer capacitor, KEMET organic capacitor, KEMET polymer electrolytic capacitor, solid polymer capacitor, conductive polymer capacitor, low ESR polymer capacitor, high ripple current capacitor, SMD polymer capacitor, tantalum polymer capacitor, KO-CAP capacitor datasheet, KEMET KO-CAP low ESR, KEMET polymer capacitor 5mOhm ESR, high reliability polymer capacitor Hashtags: #KEMETKOCAP #KOCAP #KEMETCapacitor #PolymerCapacitor #OrganicCapacitor #SolidPolymerCapacitor #PolymerElectrolyticCapacitor #ConductivePolymerCapacitor #LowESRCapacitor #5mOhmESR #HighRippleCurrentCapacitor #SMDPolymerCapacitor #TantalumPolymerCapacitor #PowerFilteringCapacitor #DecouplingCapacitor #DCDCConverterCapacitor

TDK T5838 digital PDM MEMS microphone, low-profile surface-mount microphone with pulse density modulation (PDM) output, operating from 1.65V to 1.98V supply, configurable performance modes including High Quality, Low Power and Ultrasonic operation, signal-to-noise ratio (SNR) up to 68dB, acoustic overload point (AOP) up to 133dBSPL, clock frequency range from 400kHz to 4.8MHz, wake-on-sound support, left/right channel selection, compact package optimized for portable audio, voice recognition, smart devices, IoT products and battery-powered applications. Search Keywords: TDK T5838, T5838 MEMS microphone, T5838 PDM microphone, digital MEMS microphone, PDM output microphone, low power MEMS microphone, ultrasonic MEMS microphone, TDK InvenSense microphone, wake on sound microphone, digital microphone 1.8V, MEMS audio sensor, voice recognition microphone, IoT microphone, T5838 datasheet Hashtags: #T5838 #TDKT5838 #TDK #MEMSMicrophone #DigitalMicrophone #PDMMicrophone #AudioSensor #VoiceRecognition #WakeOnSound #LowPowerMicrophone #UltrasonicMicrophone #IoTAudio #SmartDeviceAudio #MEMSAudio #EmbeddedAudio