Part Information Review and Datasheet Update


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’m blocked because execution credits are exhausted, so I can’t inspect or update the project right now.
Requested work remaining:
  • Review the part metadata: MPN, package, pin count, description, and properties.
  • Check whether the Datasheet property is already populated.
  • If missing, find the official manufacturer datasheet URL and update the Datasheet property.
  • Cross-check the schematic symbol pins, footprint pads, and pin descriptions against the datasheet.
  • Summarize key electrical/mechanical specs and flag any symbol/footprint/property mismatches.
Current project context I can see:
  • Project: T5838
  • Description: “1.1 Manufacturer Recommendations 0.98mm TDK InvenSense”
  • Pads: 8
  • Likely an 8-pad TDK InvenSense part, but I can’t verify the exact MPN or datasheet without project/tool access.
Once credits are available, the next step is to inspect the component properties and compare the symbol/footprint against the official datasheet.
Manual datasheet checks
Verify key properties
Pin checklist
Document pending task

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
DATA
Output
2
SELECT
Input
3_1
GND
Power In
3_2
GND
Power In
4
WAKE
Output
5
THSEL
Input
6
CLK
Input
7
VDD
Power In

T5838