The TPS3839G33DBZT is an ultra-low-power voltage supervisor designed to monitor system supply rails and provide reliable reset signaling for microcontrollers, processors, FPGAs, and other digital systems. The device continuously supervises the supply voltage and asserts a reset output when the monitored voltage falls below the factory-programmed threshold, ensuring proper system startup, shutdown, and fault recovery. Its low quiescent current makes it particularly suitable for battery-powered, portable, and energy-efficient applications where power consumption is critical. The device features a precision voltage monitoring architecture with a fixed reset threshold optimized for nominal logic supply rails. It provides a stable reset output with an internally defined reset timeout period, eliminating the need for external timing components. The compact package and robust noise immunity make it ideal for embedded systems, industrial controls, consumer electronics, IoT devices, medical equipment, and wireless communication platforms. Key Features Ultra-low quiescent current operation Precision fixed-voltage supervision Factory-programmed reset threshold for logic supply monitoring Active-low reset output Internal reset timeout delay High threshold accuracy over temperature Fast response to undervoltage conditions Push-pull reset output configuration No external components required for operation Compact surface-mount package Wide operating temperature range High reliability and low power consumption Applications Microcontroller reset generation Embedded control systems Battery-powered electronics Industrial automation equipment IoT and wireless sensor nodes Portable medical devices Consumer electronics Data acquisition systems Power management subsystems Communication and networking equipment Electrical Characteristics Fixed supply voltage monitoring Precision undervoltage detection Low operating current Integrated reset timing circuitry Stable reset assertion during power-up and brownout conditions Noise-tolerant voltage supervision Reliable operation across specified temperature range Package Information Surface-mount package Compact footprint for space-constrained designs RoHS-compliant construction Suitable for automated assembly processes #commonpartslibrary #integratedcircuit #powersupervisor #voltagesupervisor #resetcontroller #powermanagement #embeddedsystems #microcontroller #lowpower #batterypowered #industrialelectronics #iot #electronicsdesign #semiconductor #texasinstruments

Buck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 2A 15-PowerVFQFN The TPS63070RNMT is a high-efficiency buck-boost DC-to-DC converter manufactured by Texas Instruments. This power management integrated circuit is designed to provide a stable regulated output voltage from input sources that may be above, below, or equal to the desired output voltage. The device automatically transitions between buck and boost operating modes to maintain efficient and continuous power delivery across varying supply conditions. The converter integrates low-resistance power MOSFETs and advanced control circuitry to achieve high conversion efficiency, low quiescent current, and compact implementation. It is widely used in battery-powered systems, portable electronics, embedded devices, industrial control systems, wireless communication equipment, and USB-powered applications requiring stable voltage regulation from fluctuating power sources. The TPS63070RNMT is optimized for applications demanding high power density, extended battery life, and reliable operation under dynamic load conditions. Its compact package and integrated functionality reduce external component count and simplify PCB design for modern power management architectures. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Topology Automatic buck and boost mode operation Input Voltage Characteristics Supports input voltages above, below, or equal to output voltage Output Characteristics Regulated fixed or adjustable DC voltage output Switching Technology Integrated synchronous power MOSFET architecture Efficiency Characteristics High-efficiency power conversion across wide operating conditions Control Architecture Advanced PWM/PFM power regulation control Current Capability Designed for medium-to-high current portable power applications Quiescent Current Low standby current for battery-powered operation Thermal Characteristics Integrated thermal protection and efficient heat management Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type VQFN surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics Portable devices USB-powered systems Industrial automation Embedded systems Wireless communication equipment IoT devices Portable instrumentation Power banks Single-cell battery applications Manufacturer Texas Instruments #commonpartslibrary #powermanagement #buckboostconverter #dcdcconverter #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterymanagement #surfaceountcomponents #electronicsdesign #voltageregulator #industrialelectronics #usbpower

Standard (General Purpose) Amplifier 4 Circuit Rail-to-Rail 14-TSSOP The ADA4096-4ARUZ-R7 is a precision quad operational amplifier designed for industrial, instrumentation, automotive, and general-purpose signal conditioning applications. It features rail-to-rail input and output operation, allowing accurate signal processing across a wide supply voltage range while maintaining low offset voltage, low bias current, and high stability. The device incorporates overvoltage protection on the inputs, enabling robust performance in harsh operating environments and fault-tolerant designs. Its combination of precision, low power consumption, and wide dynamic range makes it suitable for sensor interfaces, data acquisition systems, process control equipment, battery-powered devices, and measurement instrumentation. Engineering Specifications Manufacturer: Analog Devices Part Number: ADA4096-4ARUZ-R7 Device Type: Precision Operational Amplifier Amplifier Configuration: Quad Input Stage: Rail-to-Rail Output Stage: Rail-to-Rail Supply Voltage Range: Wide Operating Range Input Overvoltage Protection: Integrated Input Bias Current: Low Input Offset Voltage: Low Noise Performance: Low Noise Operation Gain Bandwidth Product: Optimized for Precision Signal Conditioning Slew Rate: Suitable for General-Purpose Analog Applications Power Consumption: Low Power Package Type: Thin Shrink Small Outline Package Mounting Style: Surface Mount Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Sensor Interfaces, Data Acquisition Systems, Industrial Control, Instrumentation, Medical Electronics, Process Monitoring, Battery-Powered Equipment, Analog Signal Conditioning Key Features Rail-to-rail input and output architecture Input overvoltage protection for enhanced robustness Low offset voltage for precision measurements Low bias current for high-impedance sensor applications Stable operation across a wide supply range Suitable for single-supply and dual-supply designs Optimized for industrial and instrumentation environments #ADA4096 #ADA40964ARUZR7 #AnalogDevices #OperationalAmplifier #OpAmp #PrecisionAmplifier #RailToRail #SignalConditioning #InstrumentationAmplifier #IndustrialElectronics #DataAcquisition #SensorInterface #AnalogDesign #PCBDesign #EmbeddedSystems #SurfaceMount #LowPowerElectronics #ElectronicComponents

IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.4, Matter, Thread, Zigbee® 47-XFBGA, WLCSP # NRF54L15-CAAA-R7 ## General Description The NRF54L15-CAAA-R7 is an ultra-low-power wireless System-on-Chip (SoC) developed by [Nordic Semiconductor](https://www.nordicsemi.com?utm_source=chatgpt.com) for advanced Internet of Things (IoT), industrial, medical, smart home, and wireless sensing applications. The device integrates a high-performance Arm Cortex-M33 processor, a dedicated RISC-V coprocessor, large embedded memory resources, and a multiprotocol 2.4 GHz radio subsystem into a compact package. It is designed to provide exceptional energy efficiency, robust wireless connectivity, and enhanced security while supporting modern wireless standards including Bluetooth® Low Energy, Matter, Thread, Zigbee®, Bluetooth Mesh, Amazon Sidewalk, and proprietary 2.4 GHz protocols. The device is optimized for battery-powered applications requiring extended operating life, high processing capability, and scalable connectivity solutions. ## Key Features ### Processing Architecture * 128 MHz Arm® Cortex®-M33 application processor * Integrated 128 MHz RISC-V coprocessor * TrustZone® security architecture ### Memory Resources * 1.5 MB Non-Volatile Memory (NVM) * 256 KB RAM ### Wireless Connectivity * Multiprotocol 2.4 GHz RF transceiver * Bluetooth® Low Energy support * Matter support * Thread support * Zigbee® support * Bluetooth Mesh support * Amazon Sidewalk support * Proprietary 2.4 GHz protocol support * Bluetooth Channel Sounding capability * Compatible with Wi-Fi companion devices ### RF Performance * Data rates up to 4 Mbps * Output power up to +8 dBm * High receiver sensitivity for extended wireless range ### Security Features * Hardware cryptographic engine * Side-channel attack protection * Tamper detection mechanisms * Secure boot and secure firmware update support ### Peripheral Interfaces * SPI * I²C (TWI) * UART * I²S * GPIO * ADC * PWM * PDM * NFC * QDEC ### Power Characteristics * Ultra-low-power operation * Optimized sleep modes * Battery-powered application support * Operating supply voltage from 1.7 V to 3.6 V ### Package Information * WLCSP package * Surface-mount technology * Industrial operating temperature support ## Applications * Smart Home Devices * Industrial IoT Systems * Wearable Electronics * Medical and Healthcare Devices * Asset Tracking Solutions * Wireless Sensors * Building Automation Systems * Smart Lighting Controls * Consumer Electronics * Connected Peripheral Devices #NordicSemiconductor #nRF54L15 #NRF54L15CAAAR7 #BluetoothLE #Matter #Thread #Zigbee #IoT #WirelessSoC #EmbeddedSystems #IndustrialIoT #SmartHome #LowPowerDesign #CortexM33 #RISCV

Mini Cool Edge IO(MCIO), PCIe Gen4, Surfacemount, Vertical, 74 Pin, PCIe SAS SFP NVMe cable dual, card. 74 Position Female Connector Non Specified - Dual Edge Gold 0.024" (0.60mm) Black

TDK T5838 digital PDM MEMS microphone, low-profile surface-mount microphone with pulse density modulation (PDM) output, operating from 1.65V to 1.98V supply, configurable performance modes including High Quality, Low Power and Ultrasonic operation, signal-to-noise ratio (SNR) up to 68dB, acoustic overload point (AOP) up to 133dBSPL, clock frequency range from 400kHz to 4.8MHz, wake-on-sound support, left/right channel selection, compact package optimized for portable audio, voice recognition, smart devices, IoT products and battery-powered applications. Search Keywords: TDK T5838, T5838 MEMS microphone, T5838 PDM microphone, digital MEMS microphone, PDM output microphone, low power MEMS microphone, ultrasonic MEMS microphone, TDK InvenSense microphone, wake on sound microphone, digital microphone 1.8V, MEMS audio sensor, voice recognition microphone, IoT microphone, T5838 datasheet Hashtags: #T5838 #TDKT5838 #TDK #MEMSMicrophone #DigitalMicrophone #PDMMicrophone #AudioSensor #VoiceRecognition #WakeOnSound #LowPowerMicrophone #UltrasonicMicrophone #IoTAudio #SmartDeviceAudio #MEMSAudio #EmbeddedAudio

Air Quality Sensor CO2 Sensor 2.5V/3.3V/5V 20-Pin SMD EP T/R The SCD41-D-R1 is a miniature photoacoustic carbon dioxide sensor module developed by Sensirion for high-accuracy environmental sensing applications. The device integrates a CO₂ sensing element, temperature sensor, humidity sensor, optical components, calibration memory, and digital signal processing into a compact surface-mount package suitable for embedded systems and portable electronics. The sensor utilizes photoacoustic sensing technology to provide precise carbon dioxide concentration measurements while maintaining low power consumption and long-term stability. Integrated humidity and temperature sensing capabilities enable environmental compensation and simplify system integration by reducing the need for external sensors. The SCD41 communicates through a standard I²C digital interface and supports automatic self-calibration functions for reliable long-term operation. Its compact footprint and low energy requirements make it suitable for battery-powered devices, smart building systems, HVAC equipment, indoor air quality monitoring systems, and IoT applications. The module is factory calibrated and designed for continuous monitoring of indoor air quality conditions. The integrated architecture minimizes external component requirements while enabling accurate sensing performance across a wide operating range. Key Features Photoacoustic CO₂ sensing technology Integrated temperature and humidity sensing High accuracy carbon dioxide measurement I²C digital communication interface Low power consumption operation Automatic self-calibration support Compact surface-mount package Factory calibrated output Long-term measurement stability Optimized for indoor air quality applications Low-profile PCB mounting design RoHS and halogen-free compliant Electrical Characteristics Low-voltage supply operation Low average current consumption suitable for portable devices Integrated digital signal processing Non-volatile calibration memory Standard I²C communication compatibility Stable operation across industrial environmental conditions Mechanical Characteristics Compact SMD package for space-constrained applications Surface-mount assembly compatible Low-profile package structure Integrated optical cavity and sensing chamber Moisture-sensitive device requiring controlled handling during assembly Functional Characteristics Real-time carbon dioxide concentration monitoring Simultaneous temperature and humidity measurement Automatic environmental compensation Continuous and periodic measurement modes Fast startup and measurement response Long operational lifetime with stable calibration Optimized airflow design for accurate sensing Suitable for continuous indoor environmental monitoring Typical Applications Indoor air quality monitoring systems Smart thermostats and HVAC controllers Building automation equipment Demand-controlled ventilation systems Portable environmental monitoring devices Smart home and IoT products Air purification systems Occupancy and ventilation monitoring Battery-powered sensing devices Consumer and industrial environmental monitoring equipment #commonpartslibrary #sensor #airquality

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) 9-LGA The BMP585 is a high-precision digital barometric pressure sensor designed for accurate altitude and environmental pressure measurement in compact, low-power embedded systems. It integrates a MEMS sensing element with advanced signal conditioning and digital compensation circuitry to provide highly stable and reliable pressure and temperature data across a wide operating range. The device is optimized for portable electronics, industrial sensing, indoor navigation, weather monitoring, drones, and IoT applications requiring precise atmospheric measurements. The sensor supports digital communication through standard serial interfaces, enabling straightforward integration with modern microcontrollers and processors. Its low noise performance, high resolution, and fast response characteristics make it suitable for applications involving motion tracking, vertical positioning, and environmental monitoring. The compact surface-mount package allows efficient PCB layout integration in space-constrained designs. The BMP585 incorporates configurable sampling, filtering, and power management features to balance measurement accuracy, bandwidth, and energy consumption. Internal calibration and compensation algorithms reduce system-level complexity while improving long-term stability and measurement consistency. The device is designed for robust operation under varying environmental conditions and supports low-power modes for battery-operated systems. Engineering Specification Device Type Digital barometric pressure and temperature sensor Sensor Functions Atmospheric pressure sensing Temperature sensing Altitude estimation support Pressure Measurement High-resolution MEMS pressure sensing element Integrated digital compensation and calibration Low-noise pressure measurement architecture Temperature Measurement Integrated temperature sensing for environmental monitoring and pressure compensation Communication Interface I²C interface support SPI interface support Power Features Low-power operation Configurable performance and sampling modes Sleep and standby operating capability Signal Processing Integrated digital filtering Configurable oversampling Internal compensation engine Package Information Compact surface-mount package RoHS-compliant construction Operating Characteristics High measurement stability Fast response time Designed for portable and industrial environments Application Areas Wearable devices Indoor navigation systems Portable weather stations Industrial monitoring IoT sensing nodes Drones and altitude tracking systems Consumer electronics #commonpartslibrary #integratedcircuit #pressuresensor

Tiny, Low-Cost, PCM Class D Amplifier with Class AB Performance The MAX98357AETE+T is a highly integrated digital input Class-D audio amplifier designed to convert digital audio streams directly into high-efficiency speaker output signals. It features an integrated digital-to-analog conversion stage and Class-D output driver, eliminating the need for an external DAC and significantly simplifying audio system design. The device accepts digital audio data through a standard I²S interface and delivers high-quality audio output suitable for portable electronics, smart speakers, embedded systems, Internet of Things devices, multimedia products, and consumer audio equipment. Its high-efficiency architecture minimizes power dissipation while maintaining excellent audio performance, making it particularly suitable for battery-powered applications. The MAX98357AETE+T incorporates advanced audio processing capabilities, low electromagnetic interference characteristics, and integrated protection features to ensure reliable operation in compact embedded audio designs. Features Digital input Class-D audio amplifier Integrated digital-to-analog conversion functionality Direct I²S audio interface support High-efficiency power amplification architecture Filterless output design Compact surface-mount package Low electromagnetic interference operation Integrated click-and-pop suppression Low power consumption High audio fidelity performance Simplified external component requirements Integrated thermal protection Short-circuit protection capability Suitable for mono speaker applications Optimized for embedded audio systems Electrical Characteristics Digital audio input architecture Class-D switching amplifier topology High-efficiency power conversion Low distortion audio reproduction Wide operating supply range Low standby power consumption Direct speaker drive capability Integrated audio signal processing functions Applications Smart speakers Embedded audio systems Internet of Things devices Portable electronics Voice-enabled products Multimedia equipment Consumer audio devices Wireless audio products Home automation systems Educational and development platforms Battery-powered audio applications Human-machine interface systems Package Information TQFN surface-mount package Compact footprint for space-constrained designs Suitable for automated PCB assembly Thermally optimized package construction High-density electronic product integration #commonpartslibrary #integratedcircuit #audio #audioamplifier #classd amplifier #digitalaudio #i2s #dac #embeddedaudio #consumerelectronics #iot #multimedia #signalprocessing #powermanagement #maximintegrated #analogdevices #electronicsdesign #audioelectronics #speakerdriver #embeddedsystems

Pogo Pin Spring Probe Connector YZ00515045R-07 YZ00515045R-07 is a surface-mount (SMD) single-pin spring-loaded contact, commonly known as a pogo pin connector. It is designed to provide a reliable temporary electrical connection in applications such as charging docks, test fixtures, battery contacts, wearable devices, and modular electronic products. The connector uses a gold-plated spring-loaded mechanism to maintain stable contact over many mating cycles. Portable medical devices Modular and detachable electronic assemblies make it suitable for charging, testing, and board-to-board contact systems.