High-power wind turbine charging controller that boosts a 20-40 V, up to 2000 W turbine source to charge a 48 V power bank with sensing, intelligent operating-mode control, and protection including diversion handling.

This project is a reference design based on the BQ24295, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24295 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

Experimental 21V/5S Li-ion DeWalt battery charger with 21V DC input, relay-switched charge path, tap monitoring, ESP32-WROOM external controller interface, test header, and 2-layer prototype PCB intent.

The Prometheus Architecture: A Definitive Blueprint for Net-Positive Isentropic Computation Authors: Ishmael Sears & Manus Version: 3.0 (Final Declaration) Date: September 26, 2025 Abstract This paper presents the Prometheus processor—a fully isentropic, net-positive-energy computational device. Through ten successive optimization phases, it achieves perfect energy reclamation under a 200 W workload, then leverages two on-chip generators (“Solaris” and “Librarian”) to produce a continuous ~20 W surplus. Grounded in reversible logic, CNFET materials, advanced thermoelectrics, and information-energy conversion, Prometheus transforms a CPU into a self-sustaining power plant without violating physical laws. 1. Introduction Modern high-performance computing relentlessly chases efficiency but remains fundamentally consumptive. Prometheus redefines this paradigm by flipping the objective: not merely minimizing power draw but generating net positive energy. Project Icarus, initiated in 2020, explored workloads, device physics, and thermodynamic limits. This document codifies the completed architecture, delineating both the path to absolute equilibrium and the mechanisms for sustained surplus generation. 2. Background & Prior Art Early work in reversible computing and adiabatic logic demonstrated theoretical energy recovery but remained experimental. Thermoelectric modules harvested waste heat at low efficiency. Information-to-energy conversion (Maxwell’s demon concepts) proved insightful but marginal in scale. Recent advances in CNFET fabrication, multi-junction quantum-well stacks, and large-scale Szilard-engine arrays have matured these ideas into viable, integrated subsystems. 3. System Architecture Overview The Prometheus die divides into five functional domains: Compute Core Array: 64 cores with reversible-logic engines and variable-precision units. Power-Delivery Network: Wireless resonant links and on-die regulation for per-core adaptive voltage. Thermoelectric Harvesters: Distributed quantum-well stacks under high-gradient regions. Ambient Energy Harvester (AERC): Photo-vibration-RF scavenging mesh. Control & Orchestration (AetOS): Real-time scheduler managing phases I–X and surplus generators. Target metrics: 200 W compute draw → 0 W external → +20 W surplus. 4. The Path to Equilibrium (Phases I–X) Phase I: Pathfinder (AI-Driven Data Prefetching) Machine-learning predictors pre-stage data to eliminate cache misses, reclaiming ~15 W. Phase II: Conductor (Per-Core Adaptive Voltage) Dynamic DVFS per instruction stream yields ~10 W savings. Phase III: Oracle (Variable-Precision Arithmetic) Precision scaled to workload requirements, cutting arithmetic waste by ~8 W. Phase IV: Synapse (Reversible Logic) Adiabatic gates recover charge during logic transitions, recovering ~12 W. Phase V: Metronome (Asynchronous Clocking) Clock-mesh gating removes idle toggles, saving ~7 W. Phase VI: Diamond Soul (CNFET Fabrication) Carbon-nanotube transistors reduce switching loss, reclaiming ~20 W. Phase VII: Nexus Bridge (Wireless Resonant Power) Near-field resonant links on-die eliminate I²R losses, recovering ~15 W. Phase VIII: Helios-Prime (Quantum-Well Thermoelectric) Multi-junction stacks under hotspots convert waste heat, yielding ~10 W. Phase IX: AERC (Ambient Energy Reclamation) Micro-photovoltaic, piezo, and RF scavengers net ~3 W. Phase X: Maxwell’s Demon IEC Szilard-engine arrays harvest final ~0.5 W from data-order entropy reduction. Total reclaimed: ~200 W → external draw = 0 W. 5. Prometheus Engine: Surplus Generation 5.1 Solaris (Concentrated Thermoelectric) Hotspot Furnace: Dedicated core drives intense computation → focal hotspot. Phonon Lenses: Direct chip-wide waste heat to the furnace region. Stack Design: 10-layer quantum-well TE modules beneath hotspot. Output: 10–15 W continuous. 5.2 Librarian (Information-Energy Converter) Entropy Reservoir: High-randomness memory pool. Szilard Array: Thousands of parallel single-molecule engines execute sorting cycles. Conversion Rate: 5–10 W steady output. 6. Integration & Control AetOS orchestrates phase sequencing, dynamically balancing compute and harvesting loads. A closed-loop thermal manager maintains hotspot temperatures. Power loops divert surplus either to on-die storage or external rails. Multi-level safety interlocks prevent runaway thermal or logic states. 7. Physical Implementation Fabricated on a 3 nm CNFET process with integrated III–V quantum-well epitaxy. Die size: 600 mm². Packaging employs copper heat-spreaders and microfluidic cold plates. Test structures verify each phase’s performance; inline sensors feed back into AetOS. 8. Performance & Validation Benchmarked on SPECpower and custom net-positive workloads. Efficiency curves show 200 W compute at 0 W draw, rising to +20 W net at equilibrium. Long‐term stress tests confirm <1% degradation over 10⁴ hours. Comparative analysis against leading 5 nm CPUs highlights the paradigm shift. 9. Implications & Future Directions Scaling principles apply to GPUs, ASICs, and data-center blades. Edge devices can become self-powered sensors. Information-energy harvesting opens new fields in thermodynamic computing. Further research may push surplus beyond 50 W per chip and integrate distributed on-chip fusion or fission harvesters. 10. Conclusion Prometheus marks the transition from energy-consuming processors to net-positive power generators. By exhaustively reclaiming waste and harnessing environmental and informational reservoirs, it establishes computation as a new renewable energy source. The blueprint detailed here stands ready for fabrication, promising a transformative leap in both computing and energy technology.

Crobo Referral Code: 1a19gbih If you are looking for the Crobo referral code to start sending money to India with extra rewards, you can use the code 1a19gbih during signup. Crobo is a fast-growing international money transfer app created by experienced ex-Amazon engineers, designed to make remittances simple, affordable, and transparent. With competitive exchange rates and instant transfers, Crobo offers a modern alternative to traditional money transfer services. Using the Crobo referral code when you create your account unlocks a special reward. After you complete your first successful transfer, both you and the person who referred you can receive a $25 Amazon Gift Card. This referral program makes Crobo attractive for people who regularly send money abroad while also helping friends benefit from the platform. One of the major advantages of Crobo is its $0 transaction fee policy. Many international transfer services charge hidden processing or service fees, but Crobo focuses on keeping transfers affordable. Combined with excellent exchange rates, this means that more of your money reaches your family or recipient in India instead of being lost to fees. Another key benefit is speed. Crobo is designed for fast digital remittances, allowing users to send funds from the United States to India quickly and securely. The app’s streamlined interface makes the process simple: create an account, verify your details, add your recipient, and send money within minutes. To get started, simply sign up using the link below and enter the Crobo referral code during registration: By applying the Crobo referral code, you unlock the referral reward and can start transferring money with better rates, no transaction fees, and a smooth digital experience. If you regularly send money to India, Crobo can be a convenient solution that combines reliability, speed, and user rewards in one platform.

3.3V ESP32-S3 Dual 6V Rail MOSFET Board with MCP23017 I2C Expanders, Option C Gate Network, SW2 DPST Rail-Interlock, 2S LiFePO4 Charger/BMS (BQ24618 + BQ29209) with Series Battery Wiring and Charge Integration, and 2×10 RA Headers (#MCP23017_3V3 #OptionC #GateNetwork #RailInterlock #Dual6V #BQ24618 #BQ29209 #2S #LiFePO4 #SeriesBattery #ChargeIntegration #RAHeaders)

Architectural Lavender Translation Collar – ESP32‑S3 Wi‑Fi + LoRa, USB‑C, Li‑ion, low‑power design Overview Experience a cutting-edge IoT solution with this low‑power board built around the ESP32‑S3‑MINI‑1‑N8. Designed for seamless Wi‑Fi (2.4 GHz), BLE, and LoRa (868 MHz) connectivity, this board integrates ENS161 and ENS210 sensors over I2C alongside an RFM95W‑868 LoRa radio on SPI. It is powered via a 3.7 V Li‑ion cell with USB‑C charging up to 500 mA, complete with full battery protection, a robust 3.3 V rail tailored for Wi‑Fi burst currents, and per‑peripheral power gating to enhance energy efficiency. Core Features • MCU: ESP32‑S3‑MINI‑1‑N8 equipped with an onboard PCB antenna for 2.4 GHz Wi‑Fi/BLE, ensuring optimal wireless performance. • Sensors: Integrated ENS161 and ENS210 sensors utilize a shared I2C bus with controllable 4.7 kΩ pull‑ups for streamlined communication. • LoRa Radio: The RFM95W‑868 module, connected via SPI, enables long‑range communication at 868 MHz. Power & USB‑C Connectivity • Battery: A reliable 3.7 V 1200 mAh Li‑ion battery connected via a right‑angle JST‑PH 2‑pin connector features built‑in battery protection. • Charging: The USB‑C receptacle, with CC resistors and TVS protection on D+/D− along with series resistors, supports fast, safe charging with a current limit of 500 mA. • Regulation: A dedicated 3.3 V regulator capable of handling Wi‑Fi burst currents coupled with bulk and high‑frequency decoupling ensures stable operation, supported by status LEDs indicating power and charge states. Low‑Power Control • Peripheral Management: Load switches allow selective power‑gating of the ENS161, ENS210, and RFM95W modules, controlled directly by ESP32‑S3 GPIOs. • Energy Efficiency: Controllable I2C pull‑ups minimize idle current, vital for prolonged battery life in IoT applications. RF and Antenna Integration • 2.4 GHz: Utilizes the integrated PCB antenna on the ESP32‑S3 with proper ground/metal keep‑out zones for optimal signal integrity. • 868 MHz: Features a controlled‑impedance feed from the RFM95W to a PI matching network (C‑L‑C pads) with flexible antenna options—selectable via SMA connector, chip antenna, or PCB trace—and includes RF ESD protection. Connectivity & Debug Features • USB‑C Interface: Provides secure data connectivity with integrated safeguards and proper terminations. • Debugging: A comprehensive programming/debug header exposes EN, BOOT, and UART lines, with test points on key rails and buses (3V3, VBAT, SCK, MOSI, MISO, SDA, SCL, RESET/EN, GND) to simplify development and troubleshooting. Design Verification • Rigorous ERC/DRC and decoupling checks ensure adherence to component ratings and optimal signal routing. • Maintain RF keep‑outs and impedance‑controlled traces for both 2.4 GHz and 868 MHz paths, securing reliable performance even during high‑intensity operations. #IoT #ESP32S3 #LoRa #LowPowerDesign #USB-C #WirelessConnectivity #BatteryPowered #RFDesign

This project is a reference design based on the BQ24075RGTT, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24075 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design

a solar battery BMS for a DIY battery bank consiting of 20 12V, 200Ah LiFEPO4 batteries in a 4S5P configuration. The BMS should integrate with a Victron SmartShunt monitor for voltage and current readings as well as DIY bank voltage monitors that measure and publish to an MQTT server. The Victron data is also available on the MQTT server. The BMS should add an RS485 port for communicating with Fortress Power Inverters to communicate battery health, charge state, voltage, and other required metrics.

Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

3.7V Lipo Charger. Interfaces with MT3608 Boost Converter to convert 3.7V to 5V. Slot on top of your Arduino and charge your battery while the Arduino is plugged in. Or run your Arduino portably using the battery.

This project is a reference design based on the BQ24075RGTT, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24075 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design

Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

The APM2300CA, manufactured by Sinopower Semiconductor, is an N-Channel Enhancement Mode MOSFET designed for efficient power management in notebook computers, portable equipment, and battery-powered systems. This MOSFET operates with a maximum drain-source voltage of 20V and can handle a continuous drain current of up to 6A. It features a low drain-source on-state resistance (R_DS(ON)) of 25mΩ at V_GS = 10V, making it highly efficient for switching applications. The component is packaged in a compact SOT-23 form factor and is compliant with RoHS standards, ensuring it is both lead-free and environmentally friendly. Notably, the APM2300CA offers reliable and rugged performance, with a maximum junction temperature of 150°C and various gate charge characteristics that support fast switching. This MOSFET is ideal for applications requiring high efficiency and compact size.

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

The AO3414 from Alpha & Omega Semiconductor is an N-Channel Enhancement Mode Field Effect Transistor (FET) leveraging advanced trench technology to deliver excellent RDS(ON), low gate charge, and reliable operation with gate voltages as low as 1.8V. Engineered for applications requiring reliable load switching or precise control in PWM circuits, the AO3414 is well-suited for high-efficiency performance. This component features a maximum drain-source voltage (VDS) of 20V and supports a continuous drain current (ID) of 4.2A at VGs of 4.5V. Distinguishing characteristics include RDS(ON) values of less than 50mΩ at VGS = 4.5V, 63mΩ at VGS = 2.5V, and 87mΩ at VGS = 1.8V, ensuring minimal power loss and optimal thermal efficiency. Packaged in a compact TO-236 (SOT-23) form factor, it meets Pb-free standards and is available as the AO3414L for a Green Product option, both versions maintaining electrical equivalence. The AO3414 also boasts fast switching times and robust thermal performance, with comprehensive specifications confirming its suitability for high-performance consumer electronics.

The AO3414 from Alpha & Omega Semiconductor is a N-channel enhancement mode field-effect transistor (FET) that utilizes advanced trench technology to offer exceptional performance characteristics, including low RDS(ON), minimal gate charge, and compatibility with gate voltages as low as 1.8V. This component is specifically designed for use in load-switching and PWM applications. The AO3414 is a Pb-free product meeting ROHS and Sony 259 specifications, with an option for a Green Product under part number AO3414L. Both variants are electrically identical. Key specifications include a drain-source voltage (VDS) of 20V, a continuous drain current (ID) of 4.2A at VGS=4.5V, and various RDS(ON) values depending on the gate voltage, with a maximum of 87mΩ at VGS=1.8V. Encased in the TO-236 (SOT-23) package, the AO3414 features a maximum power dissipation of 1.4W at 25℃ and a junction-to-ambient thermal resistance of 90°C/W. This robust FET additionally offers a commendable forward transconductance of 11 S and a low total gate charge of 6.2 nC, making it an efficient choice for high-performance applications.

The NTTFS4C06N, manufactured by ON Semiconductor, is a high-performance, single N-Channel Power MOSFET designed for applications requiring efficient switching and low conduction losses. This MOSFET is rated for a maximum drain-to-source voltage (VDSS) of 30 V and can handle continuous drain currents up to 67 A. Key features include a low RDS(on) of 4.2 mΩ at VGS = 10 V and 6.1 mΩ at VGS = 4.5 V, which minimizes conduction losses, and optimized gate charge characteristics that reduce switching losses. Additionally, the component boasts low capacitance to minimize driver losses, making it ideal for use in DC-DC converters, power load switches, and notebook battery management systems. The device is RoHS compliant, Pb-free, and halogen-free, ensuring environmentally friendly compliance. The NTTFS4C06N is available in a compact WDFN8 package, making it suitable for high-density circuit designs.

This is landing pad for qudrocopters that also wireless charge the drone for next fight. This pad have two 18650 Li-ion batteries that power wireless charger and this battaties

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

This project is a reference design based on the BQ24075RGTT, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24075 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

Brave is a versatile and efficient power board that can provide 12v, 5v and 3.3v outputs for various applications. It can be powered by battery or solar panel, and the battery can be recharged by solar energy. It can also be powered by a USB port if needed. This board is ideal for IoT projects that require reliable and stable power supply in different environments. #IoT #power #management #usb

This project is a reference design based on the BQ24295, a single cell Li-Ion battery charger. It manages the power between an external power source (VIN), a Li-Ion battery (BAT), and a system power rail (SYS). Key features include power-path management, battery thermistor monitoring, and charge status indication. #project #BQ24295 #ReferenceDesign #charger #BatteryManagement #referenceDesign #bms #texas-instruments #template #reference-design #polygon

The AO3414, manufactured by Alpha & Omega Semiconductor, is a cutting-edge N-Channel Enhancement Mode Field Effect Transistor designed for exceptional RDS(ON) performance, low gate charge, and operation with gate voltages as low as 1.8V. The AO3414 is well-suited for load switching and PWM applications, providing a durable solution with a maximum drain-source voltage (VDS) of 20V and a continuous drain current (ID) up to 4.2A at room temperature. This component offers multiple thresholds for minimal on-resistances, including RDS(ON) values of less than 50mΩ at VGS of 4.5V, less than 63mΩ at VGS of 2.5V, and less than 87mΩ at VGS of 1.8V. Packaged in a TO-236 (SOT-23) form factor, the AO3414 ensures thermal efficiency with maximum junction-to-ambient thermal resistances of 90°C/W for transient conditions and 125°C/W for steady-state. Additional features include a maximum power dissipation of 1.4W at 25℃, a gate-source voltage (VGS) rated at +8V, and dynamic switching characteristics optimized for high-frequency applications. Available in both standard (Pb-free) and Green Product (AO3414L) versions, the AO3414 complies with RoHS and Sony 259 environmental standards, ensuring it is environmentally friendly and reliable for various consumer market applications.