To power the Raspberry Pi from solar panels or a lifepo4 battery, an efficient ultra-low power boost converter with battery management is used to generate power BQ25504RGTT

Create a control system that uses a ardunio, that can turn generator on or off, which charges a battery.

AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #raspberryPi #rp2040 #lorawan #iot #solar

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.

This Power Supply Template project takes input from USB, Battery and Solar and then charges the battery and and has a 3.3V ouput #template #power #solar

This is a reference design WiFi remote control utilizing an ESP32-PICO. It includes a battery circuit, a buzzer, and multiple control buttons for inputs. #referenceDesign #simple-embedded #espressif #project #button #esp #template #reference-design

This Power Supply Template project takes input from USB, Battery and Solar and then charges the battery and and has a 3.3V ouput #template #power #solar

This Power Supply Template project takes input from USB, Battery and Solar and then charges the battery and and has a 3.3V ouput #template #power #solar

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.

Solar-powered autonomous development board that allows you to grow your project from a small seed to a big, beautiful flower. AAA(10440) LiFePO4 battery as energy storage. BQ25504 Ultra Low-Power Energy Harvester

Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

AvocAudio is a compact tinyML community board designed for extensive audio data collection for various tinyML applications. It leverages the Raspberry Pi RP2040 and integrates a LoRa-E5 LoRaWAN Transceiver Module for connectivity. Equipped with an SD card slot for local data storage, the board ensures efficient data collection. The board operates on solar power or a lithium-ion battery, ensuring flexible and efficient energy use. #raspberryPi #rp2040 #lorawan #iot #solar

This is a reference design of high efficiency synchronous step-down dc-dc converters optimized for battery powered portable applications. #power #dcdc #ti #buck #referenceDesign #powermanagement #texas-instruments #template #reference-design

To power the Raspberry Pi from solar panels or a lifepo4 battery, an efficient ultra-low power boost converter with battery management is used to generate power BQ25504RGTT

This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

Environmental exposure risk measuring device based on ESP32, ultraviolet light (UV) and CO2 gas sensor modules. It has a voltage booster based on MT3608 chip and a solar panel lithium battery charger with MPPT based on CN3791 chip.

This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #reusable #module #simple-embedded #microchip #sublayout

Solar-powered autonomous development board that allows you to grow your project from a small seed to a big, beautiful flower. AAA(10440) LiFePO4 battery as energy storage. BQ25504 Ultra Low-Power Energy Harvester

Arduino Uno shield used to monitor chimney smoke and provide feedback to stove. This shield powers the Arduino using TEGs and a battery. This shield provides power to an LED, fans, and a light sensor used to detect light intensity.

The u-blox NEO-6M GPS engine on these modules is quite a good one, and it also has high sensitivity for indoor applications. Furthermore, there’s one MS621FE-compatible rechargeable battery for backup and EEPROM for storing configuration settings. The module works well with a DC input in the 3.3- to 5-V range

Heating element temperature controller with 2S battery support and power meter.

This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #project #Template #projectTemplate #reusable #module #simple-embedded #microchip #arduino #sublayout

This project is an RF-ID lock circuit, complete with microcontroller (MCU). It features an RC522 RFID reader for identification, controlled by an STM32F103C8T6 MCU. The structure also includes an OLED display, lock circuit, and user interface switches. Designed to operate with a AAA battery power source. #MCU #referenceDesign #simple-embedded #stm #project #STM32 #lock #OLED #template #reference-design

Solar-powered ESP32-C3 predator deterrent with PIR trigger, 5 V LED boost driver, audio amplifier, battery charging, and 60 mm x 45 mm 2-layer hand-solderable layout.

This circuit is an ultrasonic distance meter based on an ATTiny2313 microcontroller. It uses an HC-SR04 ultrasonic sensor to measure distance and displays the results on an OLED display. The power supply is constructed using a Boost converter (TPS613222A) and a 2-cell AA battery. Additionally, it also includes ISP for programming, RESET and START switches, and LED indicators. #project #Template #projectTemplate #ultrasonic #OLED #arduino #attiny2313 #TPS613222A #ISP #referenceDesign #simple-embedded #microchip #template #reference-design .

Power management board for a low-power embedded system with solar panel, 1S LiPo battery, and USB 2.0 inputs; charges the battery from available external power, powers the system from battery when external sources are absent, prioritizes USB over solar, and generates selectable boosted 12V or 5V output plus a regulated 3.3V rail.

Power management board for a low-power embedded system with solar panel, 1S LiPo battery, and USB 2.0 inputs; charges the battery from available external power, powers the system from battery when external sources are absent, prioritizes USB over solar, and generates selectable boosted 12V or 5V output plus a regulated 3.3V rail.

Compact 60 mm x 40 mm child safety wearable PCB with ESP32-S3, SIM800L GSM, NEO-6M GPS, MPU-6050, MAX30102, USB-C charging/programming, LiPo battery input, and test-pointed I2C/UART power rails. Target layout is 2-layer with all components on top, bottom ground plane, short direct I2C/UART routing, and GSM placement isolated from GPS and sensor sections.

Beginner-friendly breadboard schematic for an Arduino Uno driving exactly three servo headers from a separate 4xAA battery pack with shared ground and clear wiring labels.

This is the circuit for Microdriver that is used for 3.7V Li-ion battery with Maintain and Non-maintain mode.

Low-power ESP32 audio/radio device with SA828 walkie-talkie module, MAX9814 microphone, PAM8403-driven GD14 bone-conduction output, and single-cell Li-ion charging, power-path, 3.3 V regulation, and battery monitoring.

This is a LoRa-based door and window sensor incorporating a microcontroller unit (MCU). It features a reed sensor, LED indicators, a AAA non-rechargeable battery, and a booster IC for constant voltage. The MCU is linked to peripherals through nets, ensuring optimal performance #LoRa #MCU #ReferenceDesign #project #referenceDesign #simple-embedded #seeed #seeed-studio #template #reference-design

Automotive smart fuel pump controller with >12 V battery qualification, protected battery input, analog FSCM command following, 25 A current sensing, thermal/fault indication, blue/red LED signaling, and 5-second buzzer alert. Control and fault nets are explicitly terminated to avoid floating or undriven states; any intentionally provisional control nodes are weakly biased to safe defaults during refinement.

Raspberry Pi-based drone control PCB focused on mission endurance for an assumed 10 km travel mission. Camera-specific circuitry and storage subsystems are removed. The Raspberry Pi remains the central processing unit and interfaces to power management, RF telemetry/control, GNSS, IMU, ESC/PWM outputs, battery monitoring, and debug interfaces. Assumption: the 10 km requirement is treated as mission travel/range rather than 10 km altitude, subject to later airframe and regulatory review.

4-layer marine GPS timing and communication device using nRF52840, u-blox ZED-F9P GNSS with external active antenna via u.FL, 915 MHz LoRa radio, Li-ion battery with USB-C charging, separate clean GNSS LDO and digital 3.3V rail, SPI memory LCD, RGB LEDs, buzzer, and 6-axis IMU. PCB target is a 70 mm circular layout with strict RF zoning, dedicated ground plane, 50 ohm RF traces, physical separation between GNSS and LoRa, and low-noise placement suitable for harsh marine environments.

This is a smart watch project based on E73-2G4M04S1A module with SoC nRF52810 on board. OLED display and coin battery #wearable #nRF52810 #E73 #Ebyte #BLE #referenceDesign

XIAO nRF52840 Breakout with Centered Accelerometer, Precision Mounting Holes, and Additional Battery Connector

Passive BLE tracker locator with ESP32-S3, 2.4-inch TFT UI, USB-C charging, LiPo battery power, GNSS logging, 2.4 GHz BLE/Wi-Fi energy detection, passive BLE advertisement identification in firmware, and optional ADL5904 cellular-band sensing.

Bluetooth RC car controller using ESP32-WROOM-32E, TB6612FNG dual H-bridge, XL4015 5V buck module, DC barrel battery input, dual 2-pin motor screw terminals, 1000uF VM bulk capacitor, 100nF decoupling, 10k EN pull-up, 30 mil power traces, 10 mil signal traces, and ESP32 antenna edge keep-out.

Portable Raspberry Pi Pico and NEO-6M GPS tracker powered by a single-cell Li-ion battery, with USB-C charging input, CC resistors, and USB-line ESD protection. Designed to support about 65 mA active current and roughly 30 hours from a 2000 mAh cell, following the performance targets from the evaluation paper.

Experimental 21V/5S Li-ion DeWalt battery charger with 21V DC input, relay-switched charge path, tap monitoring, ESP32-WROOM external controller interface, test header, and 2-layer prototype PCB intent.

Two-channel symmetric line follower robot, dual CNY70 sensor front-end with mirrored 2N2222A motor drive stages and central 8V battery input

Bilateral smart running insole data logger using two nearly identical ESP32-S3 pressure-sensing PCBs. Left variant is an ESP-NOW slave without microSD; right variant is the master with microSD logging. Both preserve the 16-zone FSR mux front end, LiPo charging, AP2112K regulation, USB-C charging input, JST battery connector, and the 280mm x 90mm 2-layer low-profile insole form factor.

Compact 2S Li-ion charger for Sony NP-FZ100 battery using DC input, 8.4 V CC/CV charging, automatic termination, reverse polarity, overvoltage, overcurrent, and thermal protection, with defined B+ and B- battery outputs and PCB-buildable component choices.

Cow health-monitoring wearable PCB for a cow-mounted device. Rear strap electronics target 20-25 g and front sensing assembly target about 15 g. Uses an ESP32-based sensor controller, 200 mAh LiPo battery, battery charging circuitry, and interfaces for ammonia, methane, IR temperature, and saliva sensing. Design must tolerate moisture, mucus, debris, vibration, fur contact, and tongue/lick exposure while remaining compact and lightweight for wearable use.

FlowState Headband EVT1 — 4-Channel EEG Calibration Device Closed-loop EEG neurofeedback headband for theta/beta baseline calibration. 4-layer mixed-signal PCB, 40x30mm. Core ICs: - ADS1299-4PAG (TI) — 4-channel 24-bit EEG analog front end, SPI interface, 250 SPS - nRF5340 (Nordic) — Dual-core BLE 5.3 SoC, 128 MHz app core + 64 MHz network core Key requirements: - Separate analog and digital power domains (dual LDO: LP5907 for AVDD, AP2112 for DVDD) - Split analog/digital ground planes with single-point connection - 6 electrode inputs (4 active + 1 reference + 1 DRL) with individual TVS ESD protection on each - LIS2DH12 accelerometer (I2C) for motion artifact detection - MCP73831 USB-C battery charging (300-500 mAh LiPo) - 2.4 GHz chip antenna or PCB trace antenna at board edge with 10mm keepout - Conformal coating for sweat/moisture protection Reference designs: - Analog front-end: TI ADS1299 EVM (SBAS499) - Digital/BLE: Nordic nRF5340 DK reference schematic Critical constraint: Microvolt-level EEG signals — analog input routing and power supply filtering are the highest-priority layout concerns.

Wearable closed-loop ultrasonic monitoring and transcutaneous neuromodulation system based on ESP32-C3, powered from a 7.4 V 1000 mAh LiPo battery with TP4056 charging, MT3608 boost conversion, AMS1117-3.3 regulation, JSN-SR04T ultrasonic sensing, LED and buzzer alerts through a BC547 driver, and a reserved neuromodulation interface for future integration.

Wearable health device prototype schematic with ECG sensing via AD8232, motion sensing via BNO085 or BMI270 IMU breakout, on-board processing using TI TM4C123G LaunchPad or MSPM0G3507 LaunchPad, optional ESP8266 Wi-Fi, LiPo battery charging with MCP73831, regulated 3.3 V power from TPS63031 buck-boost or AP2112 LDO prototype option, and user interfaces including electrode connector, JST battery connector, programming header, and optional on/off switch.

Production-defensible Rev B ear tag tracker using nRF9151 with separate LTE and GNSS antennas, solar-assisted LiPo charging, battery protection, SPI NOR flash, NFC, eSIM, I2C sensors, Tag-Connect SWD, grouped EVT test points, and RF/power zoning on a 40 mm x 24 mm 4-layer PCB.

Misty Pink Replicator schematic finalized for layout handoff with ESP32-S3, USB-C battery charging, T5838 always-on wake microphone, CI1302 backup ASR analog microphone front end, HTEW0154T8 SPI e-ink display, standardized power/test nets, and final ERC-clean baseline.