Pin Function Grouping
Worked for 56 sec
Done — I generalized the functional groups and set every pin’s Section property to exactly match its Pin Group.
Final groups are: Power, Ground, Clock, Reset, Debug, Communication, and GPIO.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 6 sec
I’ll assign terminal ordering and orientations by group: Power at order 1/top, Ground at order 10/bottom, and spread the remaining groups across left/right without putting all on one side.
Worked for 1 min 1 sec
Done — Terminal Order and Pin Orientation are assigned across all pins.
Power is order 1 / Top, Ground is order 10 / Bottom, and the remaining groups are ordered 2–6 with orientations split between Left and Right.
Verify and refine symbol
Verify symbol layout
Run ERC check
Add datasheet link
Review pin descriptions
