Part Metadata Audit and Update

adrian95

adrian95

The pins are already grouped. Can you place them into their respective sections based on their functions

flux

Got it — I’ll keep the existing pin groups and assign the terminal Section property so the symbol is organized into functional sections without duplicating pins.

flux

I assigned the existing grouped pins into functional Section values across all 72 terminals: Power, Ground, System Control, Clock, GPIO Port A/B/C/D/E, Debug/GPIO, and RTC/GPIO where appropriate.
Verification spot-checks passed:
  • VDD_1 → Section Power
  • VSS_1 → Section Ground
  • NRST → Section System Control
  • PH0-_OSC_IN → Section Clock
  • PA0 → Section GPIO Port A
  • PB3 → Section Debug / GPIO Port B
  • PC13 → Section RTC / GPIO Port C
  • PE10 → Section GPIO Port E
Review reports no open errors or warnings. Some Section values triggered non-blocking suggestions because they are more specific than Flux’s common presets, but the values were applied successfully.
Run ERC/DRC
Check PA4 functions
Normalize sections
Find blank sections
Sign up to send

No results...

Learn to Add a Component

STM32U3C5JIY6QTR

STM32U3C5JIY6QTR thumbnail
Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 395 CoreMark®, 2 MB flash memory, 640 KB SRAM, SMPS, crypto
• 1.71 V to 3.6 V power supply • -40 °C to +105 °C temperature range • VBAT mode: supply for RTC, 32 x 32-bit backup registers • 1.6 μA Stop 3 mode with 8-Kbyte SRAM • 3.15 μA Stop 3 mode with full SRAM • 3.5 μA Stop 2 mode with 8-Kbyte SRAM • 5.7 μA Stop 2 mode with full SRAM • 12 μA/MHz Run mode @ 3.3 V, 48 MHz (While(1) SMPS step-down converter mode) • 15.5 μA/MHz Run mode @ 3.3 V, 48 MHz (CoreMark® SMPS step-down converter mode) • 20 μA/MHz Run mode @ 3.3 V, 96 MHz (CoreMark® SMPS step-down converter mode) • Brownout reset (BOR) in all modes except Shutdown mode Arm® 32-bit Cortex®-M33 CPU with TrustZone® and FPU ART Accelerator • 8-Kbyte instruction cache allowing 0-wait-state execution from flash and external memories: frequency up to 96 MHz, MPU, 144 DMIPS and DSP #CommonPartsLibrary #IntegratedCircuit

Properties

STM32U3C5JIY6QTR

STMicroelectronics

Integrated Circuits

st.com/resource/en/datasheet/stm32u3c5ci.pdf

IC

parametric-v1

Pricing & Availability

See prices from popular manufacturers for your project.

Controls