Interface ICs

Temperature Sensor Digital, Local -40°C ~ 125°C 16 b 4-PICOSTAR (0.76x0.76) Digital Temperature Sensor — measures temperature using a high-accuracy digital sensing element with an I²C-compatible interface. The TMP114AIYMTR operates from a 1.7 V to 5.5 V supply, provides 16-bit temperature resolution, and supports a temperature range of −40°C to +125°C in a small 6-pin SOT-23 package. #TemperatureSensor #DigitalSensor #I2C #PCBComponent #TexasInstruments #TMP114AIYMTR

Pressure Sensor 1PSI (6.89kPa) Gauge Male - 0.11" (2.79mm) Tube 14 b 6-DIP (0.453", 11.50mm), Top Port Pressure sensor for measuring 0 to 1 psi (gauge) pressure with a digital I²C interface. The ABP2DANT001PG2A3XX operates from a 3.3 V supply and provides compensated, calibrated pressure and temperature output, making it suitable for direct integration into embedded measurement and control systems. #PressureSensor #BoardMountPressureSensor #Honeywell

CONN MOD JACK RJ45 TH The HR911130A is a single-port RJ45 MagJack® Ethernet connector from HanRun Electronics with integrated Ethernet isolation magnetics and green/yellow status LEDs in a compact through-hole, right-angle package. Per the datasheet, it is designed for 100/1000Base-T Ethernet applications and meets or exceeds IEEE 802.3ab requirements, simplifying PCB layout by eliminating the need for external isolation transformers. Key Features Single-port RJ45 connector with integrated Ethernet magnetics Supports 100/1000Base-T Ethernet applications Integrated green/yellow link/activity LED indicators Shielded metal housing for improved EMI performance Through-hole, right-angle PCB mounting Compliant with IEEE 802.3ab Ethernet requirements 1500 Vrms isolation between UTP side and chip side Integrated 4 x 75 ohm termination network and 1000 pF / 2 kV capacitor shown in datasheet Reduces external component count and PCB space RoHS compliant Shield / mechanical notes: footprint pads 15 and 16 are plated through-hole shield/mechanical tabs; pads 17 and 18 are non-plated locating holes. The current schematic exposes pins 1-14 as electrical terminals; shield tabs 15/16 are documented as physical shield/mechanical tabs and are not exposed as separate schematic terminals. Ideal for routers, switches, embedded Ethernet devices, industrial control, IoT equipment, and other 100/1000Base-T network interfaces. #HR911130A #HanRun #RJ45 #MagJack #Ethernet #LAN #IntegratedMagnetics #NetworkConnector #PCB #EmbeddedSystems #IndustrialElectronics #IoT #ThroughHole #IEEE8023ab #1000BaseT

-40℃~+85℃ 1.2V、3.3V 5.4Gbps Driver I2C QFN-64(7.5x7.5) Video Interface ICs ROHS The LT7911D is a high performance Type-C to MIPI®DSI/CSI chip for VR/Display application. For DP1.2 input, LT7911D can be configured as 1/2/4 lane. Adaptive equalization makes it suitable for long cable application and the maximum bandwidth is up to 21.6Gbps. For MIPI®DSI/CSI output, LT7911D features configurable single-port or dual-port MIPI®DSI/CSI with 1 high-speed clock lane and 1~4 high-speed data lanes operating at maximum 1.5Gbps/lane, which can support a total bandwidth of up to 12Gbps. LT7911D supports burst mode DSI video data transferring, also supports flexible video data mapping path. For LVDS output, LT7911D can be configured as single-port or dual-port Features  Type-C  Compliant with VESA DisplayPort Alt Mode on USB Type-C Standard version1.0  Compliant with USB Power Delivery Rev.2.0  Compatible with USB Type-C V1.1  Built-in CC controller for plug and orientation detection  One port CC for UFP communication  DP/eDP Receiver  Compliant with DisplayPort Specification 1.2 for 1.62Gbps, 2.7Gbps ,5.4Gbps  Compliant with Embedded DisplayPort (eDP) Specification version 1.4  Support DisplayPort 1, 2，4 lanes  Support HDCP 1.3  Support eDP Authentication: Alternative Scramble Seed Reset  Adaptive DisplayPort Receiver Equalization for PCB, cable and connector losses  Single/Dual-Port MIPI® DSI/CSI Transmitter  Compliant with DCS1.02, D-PHY1.2& DSI1.02 &CSI-2 1.0  1 Clock Lane, and 1~4 Configurable Data Lanes per port  1/2 configurable port  80Mbps~1.5Gbps per data lane  Maximum 64pixels overlap for each half  Both non-burst and burst video mode supported  Support RGB666, Loosely RGB666, RGB888, RGB565, 16-bit YCbCr4:2:2,20-bit YCbCr4:2:2,24-bit YCbCr 4:2:2 Video Format  Video stream copy mode for each port  Side-by-side 3D support  Single/Dual-Port LVDS Transmitter  Compatible with VESA and JEIDA standard  1/2 Configurable Port  1 clock lane and 4 configurable data lanes per port  Support Maximum Data Rate 1.2Gbps/lane  Output Color Depth supports 6-bit and 8-bit  Video stream copy mode for each port  Side-by-side 3D support  Miscellaneous  3.3V/1.2V Supply Power  Internal CSC support conversions between YCbCr 4:4:4 and RGB, and between YCbCr 4:2:2 and YCbCr 4:4:4  Support SPDIF and 2-channel IIS audio output  Support 100KHz I2C slave  Integrated Microprocessor  Temperature Range: -40°C ~ +85°C  ESD ±2kV HBM #LT7911D #Lontium #DisplayBridge #DisplayPort #USBTypeC #MIPIDSI #MIPICSI #LVDS #VideoConverter #EmbeddedSystems #DisplayInterface #VR #IndustrialDisplay #DisplayController

Accelerometer, Gyroscope, Temperature, 6 Axis Sensor I2C, I3C, SPI Output The ASM330LHHX is a 6-axis IMU featuring a 3-axis digital accelerometer and a 3‑axis digital gyroscope with an extended temperature range up to +105°C, designed to address automotive nonsafety applications. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes to serve both the automotive and consumer markets. The ASM330LHHX is AEC-Q100 compliant and industrialized through a dedicated MEMS production flow to meet automotive reliability standards. All the parts are fully tested with respect to temperature to ensure the highest quality level. The sensing elements are manufactured using ST’s proprietary micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit, which is trimmed to better match the characteristics of the sensing element. Features • AEC-Q100 qualified • Android Auto™ compliant and CarPlay® compliant • Extended temperature range from -40 to +105°C • Embedded compensation for high stability over temperature • Accelerometer user-selectable full scale up to ±16 g • Extended gyroscope range from ±125 to ±4000 dps • Dual operating modes: high-performance and low-power mode • I²C, MIPI I3C℠, and SPI serial interfaces • Six-channel synchronized output to enhance accuracy of dead-reckoning algorithms • Programmable finite state machine • Machine learning core • Smart programmable interrupts • Embedded 3 KB FIFO available to underload host processor • ECOPACK and RoHS compliant Applications • Dead reckoning (DR) • Vehicle-to-everything (V2X) • Telematics, e-tolling • Antitheft systems • Impact detection and crash reconstruction • Motion-activated functions • Driving comfort • Vibration monitoring and compensation #ASM330LHHXTR #STMicroelectronics #IMU #MEMS #Accelerometer #Gyroscope #AutomotiveElectronics #MotionSensor #MachineLearning #SensorFusion #AECQ100 #EmbeddedSystems

Battery Power Management IC Multi-Chemistry 14-TSSOP The bq34210-Q1 1-Series Cell System-Side CEDV Fuel Gauge provides fuel gauging and End-of-Service (EOS) Determination for 1-series cell batteries in applications that encounter infrequent discharge, such as eCall systems and uninterruptible power supplies (UPS) for backup during power failures, where batteries may stay connected to a charging power source most of their lifetime until needed. The bq34210-Q1 fuel gauge supports multiple battery chemistries, including Li-Ion, LiFePO4, and NiMH. The gas gauging function uses voltage, current, and temperature data along with Compensated End-ofDischarge (CEDV) technology to provide State-ofCharge (SOC) and State-of-Health (SOH) data. The device's EOS Determination function alerts when battery capability has degraded and is approaching the end of its usable service. Battery fuel gauging with the bq34210-Q1 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery management system. Features 1• Automotive-Qualified AEC-Q100, Grade 3 • 1-Series Cell Battery Fuel Gauge Supports Li-Ion, LiFePO4, and NiMH (3-Cell) Chemistries – Resides on System Board – Powers Directly from the Battery with Integrated LDO – Supports a Low-Value External Sense Resistor (10 mΩ) • Learning Load Enable (LEN) from Host • Ultra-Low Power Consumption in NORMAL (50 µA) and SLEEP (9 µA) Modes • Supports Replacement Batteries • Accurate End-of-Service (EOS) Determination for Batteries in Rarely Discharged Applications • CEDV Gas Gauge for 1-Series Cell Batteries, Providing: – State-of-Charge (SOC) – Time-to-Empty (TTE) – State-of-Health (SOH) • High-Side and Low-Side Current Sensing Options • Internal Temperature Sensor OR External Thermistor • Microcontroller Peripheral Interface Supports: – 400-kHz I 2C™ Serial Interface – Configurable Interrupt (ALERT) for SOC, Battery Levels, Temperature Faults, and Charge/Discharge Status 2 Applications • eCall Systems • Telematics Backup Systems • Uninterruptible Power Supply (UPS) Backup Systems • Emergency Battery Power Modules #BatteryFuelGauge #BatteryManagement #FuelGaugeIC #AutomotiveElectronics #TexasInstruments #LiIonBattery #LiFePO4 #I2C #PowerManagement #AECQ100 #BackupBattery #UPS #EmbeddedSystems

Amplifier Interface 16-WQFN (4x4) LMH0394SQE/NOPB is a low-power adaptive cable equalizer designed for 3G, HD, and SD Serial Digital Interface (SDI) video applications, providing extended cable reach and automatic signal equalization for data rates from 125 Mbps to 2.97 Gbps. Key Features: Supports 125 Mbps to 2.97 Gbps SDI data rates Compliant with SMPTE ST 424, ST 292, ST 344, ST 259, and DVB-ASI Adaptive cable equalization for up to 200 m at 2.97 Gbps Ultra-low power operation (typically 115 mW) Power-save mode with automatic sleep control Programmable output de-emphasis for PCB trace loss compensation Optional SPI interface for advanced configuration Single 2.5 V supply operation Operating temperature: −40°C to +85°C 16-pin WQFN package #SDIEqualizer #CableEqualizer #BroadcastVideo #3GSDI #SignalIntegrity #TexasInstruments #LowPower #HighSpeedInterface

Dot Matrix Display Module 5 x 7 Common Cathode Row, Common Anode Column Green 2.1V 0.39" L x 0.73" W x 0.14" H (9.80mm x 18.50mm x 3.50mm) The LTP-305G is a 5×7 green LED dot matrix display from Lite-On Inc. featuring common cathode rows and common anode columns. It provides a 0.3-inch character height, a typical 2.1 V forward voltage, and is designed for through-hole PCB mounting in alphanumeric displays, status indicators, and embedded user interface applications. #LTP305G #LiteOn #LEDDotMatrix #5x7Display #GreenLED #ThroughHole #DisplayModule #EmbeddedSystems #IndustrialElectronics #ElectronicComponents

The OSD6254-1G-IPM is a high-performance System-in-Package (SiP) from Octavo Systems that integrates the Texas Instruments AM6254 processor, 1 GB DDR4 memory, power management circuitry, and essential passive components into a compact 9 × 14 mm BGA package. Featuring a quad-core Arm Cortex-A53 processor with an integrated Cortex-M4F real-time core, it provides a highly integrated solution for industrial automation, IoT gateways, edge AI, HMI, and embedded Linux applications while significantly reducing PCB design complexity and time-to-market. Key Features: Quad-core Arm Cortex-A53 processor (up to 1.4 GHz) Integrated Arm Cortex-M4F real-time co-processor (up to 400 MHz) 1 GB DDR4 memory integrated within the SiP Integrated PMIC and required passive components Rich peripheral interfaces including Ethernet, USB, PCIe, CAN, UART, SPI, I²C, I²S, and SD/MMC Industrial operating temperature range: −40°C to +85°C Compact 9 × 14 mm, 500-ball BGA package Reduces PCB complexity, BOM count, and development time Optimized for embedded Linux, industrial control, HMI, IoT gateway, and edge AI applications #OctavoSystems #OSD6254 #AM6254 #ArmCortexA53 #CortexM4F #SystemInPackage #EmbeddedProcessor #IndustrialAutomation #EdgeAI #IoT #EmbeddedLinux #BGA

NXP PN5190B1HN/C121E high-power NFC frontend / RFID reader-transponder IC. Supports 13.56 MHz NFC/RFID protocols including NFC Forum, ISO/IEC 14443 A/B, FeliCa, ISO/IEC 15693, ISO/IEC 18000-3 Mode 3, ISO/IEC 18092, ISO/IEC 21481, and MIFARE. Host interface is SPI. Official package is 40-terminal VFLGA40 SOT2062-1, 5 mm × 5 mm × 0.8 mm, 0.4 mm pitch, with exposed heatsink/GND pad; formerly referenced as HVQFN40. Supply ranges include VBAT 2.4 V to 5.5 V, VDDIO 1.62 V to 1.98 V or 2.4 V to 3.6 V, and transmitter supply paths up to 6.0 V depending on configuration. Manufacturer: NXP Semiconductors. Datasheet: https://www.nxp.com/docs/en/data-sheet/PN5190B1.pdf #NXP #PN5190 #NFC #RFFrontend #RFID #13_56MHz #SPI #ISO14443 #ISO15693 #FeliCa #VFLGA40 #SOT2062-1 #IntegratedCircuit