MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule

32.768 kHz TCXO CMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead #commonpartslibrary #crystals #oscillators

LORA-CC68-915MHz-TCXO is a compact, high-performance LoRa wireless transceiver module from NiceRF based on the Semtech LLCC68 chipset. Operating in the 915 MHz ISM band, it features a high-precision TCXO (Temperature-Compensated Crystal Oscillator) for improved frequency stability, making it ideal for long-range, low-power IoT and industrial wireless communication applications. The module supports LoRa, FSK, and GFSK modulation schemes, provides up to +22 dBm (160 mW) transmit power, and achieves receiver sensitivity as low as -129 dBm for extended communication range. It communicates through an SPI interface and is optimized for battery-powered and low-power systems. Key Features Based on Semtech LLCC68 LoRa transceiver chip 915 MHz ISM band operation High-precision TCXO for enhanced frequency stability Supports LoRa, FSK, and GFSK modulation Up to +22 dBm (160 mW) RF output power Receiver sensitivity up to -129 dBm SPI communication interface Operating voltage: 1.8 V to 3.7 V Low receive current (~6.5 mA typical) Integrated antenna switching circuitry Compact 16 mm × 16 mm SMD package Suitable for long-range and low-power wireless applications FCC-certified 915 MHz version RoHS compliant Typical Applications Smart Metering Industrial Automation Agricultural Monitoring Smart Cities Environmental Sensors Asset Tracking Warehouse Management Remote Control Systems Street Lighting Control Battery-Powered IoT Devices #CommonPartsLibrary #Module #LoRa #LLCC68 #915MHz #TCXO #WirelessModule #RFModule #IoT #IndustrialAutomation #SmartMetering #LongRangeCommunication #LowPowerDesign #SPI #EmbeddedSystems #NiceRF

u-blox M8 Concurrent GNSS LCC Module, TCXO, flash, SAW, LNA, 12.2x16 mm #CommonPartsLibrary #RF #Transceiver #Module

25 MHz TCXO HCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead ASTX-H12 25.000 MHz Abracon ASTX-H12 HCMOS output SMD TCXO, 2.5 x 2.0 x 0.9mm package, 3.2MHz to 55MHz frequency range, standard frequencies 5MHz to 44MHz, 3.3V typical supply voltage, frequency stability up to ±2.5ppm over temperature, ±2.0ppm tolerance at 25°C, low current consumption, 15pF load, 5ns max rise/fall time, tri-state standby function, MSL-1, RoHS/RoHS II compliant, suitable for cellular phones, wireless modules, GPS, RF communication and precision clock reference applications. Search Keywords: ASTX-H12, Abracon ASTX-H12, ASTX-H12 TCXO, HCMOS TCXO, SMD TCXO 2.5x2.0mm, 3.3V TCXO, 26MHz TCXO, 40MHz TCXO, 3.2MHz to 55MHz TCXO, low power TCXO, precision clock oscillator, RF reference oscillator, GPS TCXO, wireless module TCXO, ASTX-H12 datasheet Hashtags: #ASTXH12 #AbraconASTXH12 #TCXO #HCMOSTCXO #SMDOscillator #CrystalOscillator #TemperatureCompensatedOscillator #33VTCXO #25x20mmOscillator #PrecisionClock #FrequencyReference #RFOscillator #GPSOscillator #WirelessClock

12.288 MHz Temperature-Compensated Crystal Oscillator (TCXO) – High-stability HCMOS TCXO designed for wireless communications, GPS/GNSS receivers, audio systems, networking equipment, industrial automation, embedded controllers, and precision timing applications. Part of the ECS-TXO-5032 Series, it provides a 12.288 MHz output frequency with ±2.5 ppm frequency stability over temperature and ±1.5 ppm initial frequency tolerance for highly accurate clock generation. Operates from a 3.3 V supply with 6 mA maximum current consumption and features an HCMOS output, 10 ns maximum rise/fall time, 2 ms typical startup time, and −135 dBc/Hz phase noise at 1 kHz offset. Packaged in a compact 5.0 × 3.2 mm 4-pad SMD package, it is specified for operation over a −30°C to +85°C temperature range, making it ideal for precision embedded and RF timing applications. #ECSInc #ECSTXO50321228TR #TCXO #TemperatureCompensatedCrystalOscillator #12288MHz #HCMOS #PrecisionTiming #GPS #GNSS #WirelessCommunication #IndustrialElectronics #EmbeddedSystems

WisDuo LPWAN Module LoRaWAN transceiver module designed for long-range wireless communication, based on the STM32WLE5CC. It operates from 2.0–3.6 V, supports 860–930 MHz operation, and provides UART, SPI, and I²C interfaces with an IPEX antenna interface. The RAK3172-T version includes a ±2.5 ppm TCXO and is housed in a 15.5 × 15 mm SMD package. #LoRaWAN #LoRa #Wireless #Transceiver #RAK3172 #RAKwireless

±5ppm, I2C Real-Time Clock SOIC-8 RTC TCXO Realtime Time Clock MEMS I2C SOIC*3.9x4.9mm*P1.27mm*

Extremely Accurate I2C-Integrated RTC/TCXO/Crystal SOIC-16 RTC TCXO Realtime Time Clock Crystal Oscillator I2C SOIC*7.5x10.3mm*P1.27mm*

±5ppm, I2C Real-Time Clock with SRAM SOIC-8 RTC TCXO Realtime Time Clock MEMS SRAM I2C SOIC*3.9x4.9mm*P1.27mm*

TCXO Oscillators 32.000 MHZ Multi-Volt +1.7 3.6V HCMOS TCXO +/-2.5 ppm -30 +85 C 3.2x 2.5mm RoHS

Telit SE868K3-A/AL GNSS antenna module, multi-constellation GPS/QZSS/GLONASS receiver with Galileo ready support, integrated 9x9mm patch antenna, SAW filter, LNA, flash memory, RTC and TCXO, 11x11mm SMT PCB package, supports UART/I2C/SPI interfaces, A-GPS ephemeris prediction/injection, SBAS compliant, simultaneous GPS+GLONASS/Galileo tracking, optimized RF path, low power consumption, backward compatible with SE868-A series. SE868K3

SiTime SiT5356 precision MEMS Super-TCXO oscillator, ±100ppb stability over temperature, programmable frequency from 1MHz to 60MHz in 1Hz steps, ultra-low ±1ppb/°C frequency slope, excellent dynamic stability under airflow, thermal shock, vibration and board bending, integrated regulators for noise filtering, optional TCXO/VCTCXO/DCTCXO configurations, I2C digital frequency pulling option with up to ±3200ppm pull range, LVCMOS or clipped sinewave output, 2.5V/2.8V/3.0V/3.3V supply options, -40°C to +105°C operating range, suitable for 4G/5G radio, GNSS, SyncE, IEEE1588 timing, routers, switches and test equipment. Search Keywords: SiT5356, SiTime SiT5356, MEMS Super-TCXO, precision TCXO, ±100ppb TCXO, programmable TCXO, DCTCXO, VCTCXO, TCXO oscillator, 1MHz to 60MHz oscillator, I2C frequency pulling oscillator, GNSS oscillator, IEEE1588 oscillator, SyncE oscillator, telecom timing oscillator Hashtags: #SiT5356 #SiTimeSiT5356 #SuperTCXO #MEMSOscillator #PrecisionTCXO #ProgrammableOscillator #DCTCXO #VCTCXO #GNSSOscillator #TelecomTiming #IEEE1588 #SyncE #ClockReference #LVCMOSOscillator

Temperature Compensated Crystal Oscillators (TCXO) X1G0042110003 OSC-SMD_4P-L2.5-W2.0-BL_7L-XXXXXXX LCSC Part Number: C3013793 JLCPCB Part Class: Extended Part Manufactured by EPSON(爱普生)

Temperature Compensated Crystal Oscillators (TCXOs) X1G0053910015 OSC-SMD_4P-L5.0-W3.2_EPSON_X1G005391XXX LCSC Part Number: C2891962 JLCPCB Part Class: undefined Manufactured by EPSON(爱普生)

Temperature Compensated Crystal Oscillators (TCXOs) 1XZA032768AD19 OSC-SMD_4P-L3.2-W2.5-BL LCSC Part Number: C213398 JLCPCB Part Class: undefined Manufactured by KDS(大真空)

Temperature Compensated Crystal Oscillators (TCXOs) 1XXC26000PKA OSC-SMD_4P-L2.0-W1.6-TL_KDS_1XXC26000PKA LCSC Part Number: C2686190 JLCPCB Part Class: undefined Manufactured by KDS(大真空)

Temperature Compensated Crystal Oscillators (TCXOs) 1XZA032768AD19 OSC-SMD_4P-L3.2-W2.5-BL LCSC Part Number: C213398 JLCPCB Part Class: undefined Manufactured by KDS(大真空)

Temperature Compensated Crystal Oscillators (TCXOs) BT0507BH3I106CN25B OSC-SMD_10P-L7.0-W5.0-BL LCSC Part Number: C516503 JLCPCB Part Class: Extended Part Manufactured by XTALTQ(恒晶科技)

Temperature Compensated Crystal Oscillators (TCXOs) 1XXB38400MEA OSC-SMD_4P-L2.5-W2.0-BL LCSC Part Number: C253732 JLCPCB Part Class: Extended Part Manufactured by KDS(大真空)